Tag Archives: z-10

Rectangle Spline Shaft Hob 26.5355.4 Z-10 1 HSS USSR Parallel Spline Side Hob

Rectangle_Spline_Shaft_Hob_26_5355_4_Z_10_1_HSS_USSR_Parallel_Spline_Side_Hob_01_xneo

D-35mm d-26.5mm b-5.4mm N 0. Of splines(Z)-10. Rectangle Spline Shaft Hob 26.5355.4 Z-10. Type 1- applied to spline shaft centered according to major dia(centering on the outer diameter- D). Accuracy – class B. Outside diameter Do – 75mm. Hole diameter dh- 32mm. Height h- 80mm. Material – T1 HSS(P18-USSR). Steel T1 HSS: hardness – 63Rc, […]

Parallel Spline Side Hob 2632×4 Z-10 HSS-E Rectangle Spline Shaft Hob DIN 5464

Parallel_Spline_Side_Hob_2632x4_Z_10_HSS_E_Rectangle_Spline_Shaft_Hob_DIN_5464_01_uomi

D-32mm d-26mm b-4mm N 0. Of splines(Z) – 10. Rectangle Spline Shaft Hob 26 x32x4 Z-10 DIN 5464. Type 1- applied to spline shaft centered according to major dia(centering on the outer diameter- D). Accuracy – class B. Outside diameter Do – 80mm. Hole diameter dh- 27mm. Height h- 63mm. Coating Type – TiN (titanium […]

Shaper Cutters Involute Splines M2.5 Z-10 PA30 HSS USSR Shank Type Shaper Cutter

Shaper Cutters Involute Splines Type Shank. Used for splined connections according to DIN 5480, DIN 5482, ISO 4156, ANSI B92.2M, ANSI B. Module – 2.5. Number of teeth – 10. Pressure angle – 30 deg. Face width– 10 mm. Outside Dia dao – 29.29 mm. Length of total – 140mm. Morse Taper – B18 (shortened […]

Taper Shank HSS M2 Z-10 PA30 USSR Shaper Cutters Involute Splines

Shaper Cutters Involute Splines Taper Shank. Used for splined connections according to DIN 5480, DIN 5482, ISO 4156, ANSI B92.2M, ANSI B. Number of teeth – 10. Pressure angle – 30 deg. Face width– 15 mm. Outside Dia dao – 23.54 mm. Morse Taper – B18(shortened MT2). For other countries please contact me to get […]

Recent Posts

Archives

Categories