Category Archives: shaper

Shaper Cutters Involute Splines M1.25 Z-20 PA30 USSR Shank Type DIN 5480

Shaper_Cutters_Involute_Splines_M1_25_Z_20_PA30_USSR_Shank_Type_DIN_5480_01_eh

Shaper Cutters Involute Splines Type Shank. Used for splined connections according to DIN 5480, ISO 4156, ANSI B92.2M, ANSI B. Module – 1,25. Number of teeth – 20. Pressure angle – 30 deg. Face width– 16 mm. Outside Dia dao – 27.3 mm. Morse Taper – B18(shortened MT2). For other countries please contact me to […]

Shaper Cutters Involute Splines M2.5 Z-30 PA30 HSS USSR Disk Type

Shaper_Cutters_Involute_Splines_M2_5_Z_30_PA30_HSS_USSR_Disk_Type_01_ugsf

Shaper Cutters Involute Splines Disk Type. Used for splined connections according to DIN 5480, DIN 5482, ISO 4156, ANSI B92.2M, ANSI B. Module – 2.5. Number of teeth – 30. Pressure angle – 30 deg. Outside diameter – 79.03 mm. Hole diameter – 31.75 mm. Height – 15 mm. Accuracy – grade B. Material – […]

Shaper Cutters Involute Splines M3 Z-12 PA30 HSS USSR Shank Type Shaper Cutter

Shaper_Cutters_Involute_Splines_M3_Z_12_PA30_HSS_USSR_Shank_Type_Shaper_Cutter_01_zs

Shaper Cutters Involute Splines Type Shank. Used for splined connections according to DIN 5480, DIN 5482, ISO 4156, ANSI B92.2M, ANSI B. Number of teeth – 15. Pressure angle – 30 deg. Face width – 15 mm. Outside Dia dao – 40.88 mm. Length of total – 100mm. Morse Taper – B24 (shortened MT3). If […]

Shaper Cutters Involute Splines M2.5 Z-15 PA30 HSS USSR Shank Type Shaper Cutter

Shaper_Cutters_Involute_Splines_M2_5_Z_15_PA30_HSS_USSR_Shank_Type_Shaper_Cutter_01_zhxv

Shaper Cutters Involute Splines Type Shank. Used for splined connections according to DIN 5480, DIN 5482, ISO 4156, ANSI B92.2M, ANSI B. Module – 2.5. Number of teeth – 15. Pressure angle – 30 deg. Face width – 15 mm. Outside Dia dao – 41.45 mm. Length of total – 100mm. Morse Taper – B24 […]

Shaper Cutters Involute Splines M2 Z-13 PA30 HSS USSR Shank Type Shaper Cutter

Shaper_Cutters_Involute_Splines_M2_Z_13_PA30_HSS_USSR_Shank_Type_Shaper_Cutter_01_wy

Shaper Cutters Involute Splines Type Shank. Used for splined connections according to DIN 5480, DIN 5482, ISO 4156, ANSI B92.2M, ANSI B. Number of teeth – 13. Pressure angle – 30 deg. Face width– 15 mm. Outside Dia dao – 29.85 mm. Morse Taper – B18(shortened MT2). High quality is an advantageous feature of gear […]

Shaper Cutters Involute Splines M5 Z-9 PA30 USSR Shank Type DIN 5480

Shaper_Cutters_Involute_Splines_M5_Z_9_PA30_USSR_Shank_Type_DIN_5480_01_kmp

Shaper Cutters Involute Splines Type Shank. Used for splined connections according to DIN 5480, ISO 4156, ANSI B92.2M, ANSI B. Number of teeth – 9. Pressure angle – 30 deg. Face width– 16 mm. Outside Dia dao – 53.35 mm. Morse Taper – B24(shortened MT3). For other countries please contact me to get the transport […]

Shaper Cutters Involute Splines M2.5 Z-8 PA30 HSS USSR Shank Type Shaper Cutter

Shaper_Cutters_Involute_Splines_M2_5_Z_8_PA30_HSS_USSR_Shank_Type_Shaper_Cutter_01_jf

Shaper Cutters Involute Splines Type Shank. Used for splined connections according to DIN 5480, DIN 5482, ISO 4156, ANSI B92.2M, ANSI B. Module – 2.5. Number of teeth – 8. Pressure angle – 30 deg. Face width – 15 mm. Outside Dia dao – 25.2 mm. Length of total – 140mm. Morse Taper – B24 […]