Category Archives: rotary

75 HP Rotary Cutter Gearbox 1-3/8 6-Spline Input Shaft 11.46 RC-61

75_HP_Rotary_Cutter_Gearbox_1_3_8_6_Spline_Input_Shaft_11_46_RC_61_01_fs

75 HP Rotary cutter gearbox with 1-3/8 6-spline input. Shaft and a gear ratio of 1:1.46. Cast iron housing is sealed to protect the gears and bearings. The mounting plate has four bolt holes spaced 5.5 square. Gearbox has a piloted flange bottom to fit in a 5-5/8 pilot hole in the mower/cutter deck. Replaces […]

New Thk Rotary Ball Spline Ltr40uuzzcma+365l

New_Thk_Rotary_Ball_Spline_Ltr40uuzzcma_365l_01_yl

NEW THK ROTARY BALL SPLINE LTR40UUZZCMA+365L. Boyd Industrial Supply Terms & Conditions. The following terms and conditions apply to any sale by Boyd Industrial Supply? Is agreeing to and accepting these terms and conditions. In no case shall Boyd Industrial Supply, our directors, officers, employees, affiliates, agents, contractors, interns, suppliers, service providers or licensors be […]

THK New Rotary Ball Spline LTR20ZZFMA+530LF Stainless Type Nut LMG-I-1627=3E32

THK_New_Rotary_Ball_Spline_LTR20ZZFMA_530LF_Stainless_Type_Nut_LMG_I_1627_3E32_01_cw

New Other (New surplus stock, origin factory package little dirt). This item is surplus one, not used item. Keeps brand new working condition. Motor Side (Fixture Part) diameter for coupling : 15mm. Motor Side (Fixture Part) diameter : 17. Support Side diameter : N/A. Also let us know. It usually takes 5 to 10 days […]

75 HP Rotary Cutter Gearbox 1-3/8 6-Spline Input Shaft 11.46 RC-61

75_HP_Rotary_Cutter_Gearbox_1_3_8_6_Spline_Input_Shaft_11_46_RC_61_01_ja

75 HP Rotary cutter gearbox with 1-3/8 6-spline input. Shaft and a gear ratio of 1:1.46. Cast iron housing is sealed to protect the gears and bearings. The mounting plate has four bolt holes spaced 5.5 square. Gearbox has a piloted flange bottom to fit in a 5-5/8 pilot hole in the mower/cutter deck. Replaces […]

6′ Rotary Cutter Kit, 6 Spline Gear Box, HD Blade Pan, Blades, and Blade Bolts

6_Rotary_Cutter_Kit_6_Spline_Gear_Box_HD_Blade_Pan_Blades_and_Blade_Bolts_01_jzwr

Rebuild your 6′ cut rotary mower. Kit includes 40 hp Gear Box with a 1-3/8″ 6 Spline input shaft and a 1-1/2″ 12 spline output shaft 1:1.47 speed up rotation, 12 SPLINE stumpjumper type blade pan that fits most all 40hp gear boxes which has been balanced for smooth operation, featuring 13-1/2″ on center blade […]

75 HP Rotary Cutter Gearbox 1-3/8 6-Spline Input Shaft 11.46 RC-61

75_HP_Rotary_Cutter_Gearbox_1_3_8_6_Spline_Input_Shaft_11_46_RC_61_01_lw

75 HP Rotary cutter gearbox with 1-3/8 6-spline input. Shaft and a gear ratio of 1:1.46. Cast iron housing is sealed to protect the gears and bearings. The mounting plate has four bolt holes spaced 5.5 square. Gearbox has a piloted flange bottom to fit in a 5-5/8 pilot hole in the mower/cutter deck. Replaces […]

40 HP Rotary Cutter Gearbox 1-3/8 x Tappered Spline Autotech Gear 01-003

40_HP_Rotary_Cutter_Gearbox_1_3_8_x_Tappered_Spline_Autotech_Gear_01_003_01_kbrr

40 HP Rotary Cutter Gearbox 1-3/8 x Tappered Spline Autotech Gear 01-003. The item “40 HP Rotary Cutter Gearbox 1-3/8 x Tappered Spline Autotech Gear 01-003″ is in sale since Wednesday, December 22, 2021. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment Attachments\Mowers, Mower Decks & Mower Conditioners”. The […]

Rotary Cutter drive-line assembly PTO shaft with 1-3/8 6 spline and ½ shear bolt

Rotary_Cutter_drive_line_assembly_PTO_shaft_with_1_3_8_6_spline_and_shear_bolt_01_wh

Complete Drive assembly 40 Series / Series 4, 26.42 x 42.71. Please Look at all pictures. One (1) Brand New. Complete shear bolt drive-line assembly, 34.68 long. PTO Shaft with superior forged steel yoke and shielding. This PTO shaft can be cut down to make it shorter if necessary. 1 3/8 – 6 splined push […]

40 HP Rotary Cutter Gearbox 1-3/8 6-Spline or Smooth Input Shaft 11.47

40_HP_Rotary_Cutter_Gearbox_1_3_8_6_Spline_or_Smooth_Input_Shaft_11_47_01_hgp

AGKNX RC-30 Gearbox 1-3/8 Smooth Input Shaft/. 1-3/8 – 6 Spline Input Shaft. 1:1.47 Ratio with 12 Tapered Spline Output Shaft. Includes Replacement Stump Jumper / Flywheel 12 Splined Hub. This gearbox features a 1:1.47 Speed Up gear ratio for use on 5′ and larger diameter rotary cutters. Industry-standard 1-3/8″ smooth diameter input shaft with […]