This Invo Spline 32 DP x 20 degree PA 1/2 inch bore Master Gear is a precision inspection tool used in gear inspection. Made by Invo Spline in the United States, this master gear can ensure accurate and consistent results in the inspection and measurement of 32 DP x 20 degree PA. Has a 1/2 […]
Spur Gear 61 Teeth, 15.25″OD, 2.738″ Bore 6 Spline, 20 Degree, 2.50 Face. MATERIAL DOCUMENT AND CLASSIFICATION. QQ-S-681 FED SPEC SINGLE MATERIAL RESPONSE OVERALL. STEEL COMP 150-125 OVERALL. 3.880 INCHES SECOND END. 3.880 INCHES FIRST END. 2.738 INCHES BOTH ENDS. NOMINAL DISTANCE BETWEEN BODY FACE AND RECESSED HUB END. 0.002 INCHES SECOND END. 0.002 INCHES […]
A-110680019-AI Tractor Half 80� CV Driveline; 540 RPM, 1 3/8-6 Splined. 2580 Series Complete Constant Velocity Tractor Half Shaft, type B. Minimum C-to-C length: 48 (1210) mm. Tractor end: 1-3/8 6 Spline. Fits Vermeer Disc Mowers; Woods Rotary Cutters; Walterscheid WWE & WWZ series. It may be necessary to cut this driveline to length. Verify […]
You are looking at. ASH GEAR AND SUPPLY SPLINE HOB. This spline hob is new, open box. H7N30-016B-IMP, 16/32 GW15-DP-171, 30 degree. Se look closely at the pictures as they are part of the description. You get what yo. Please look at the photographs provided for they are part of the description. “OUR e B […]
This Invo Spline 80 DP x 20 degree PA 1/2 inch bore Master Gear is a precision inspection tool used in gear inspection. Made by Invo Spline in the United States, this master gear can ensure accurate and consistent results in the inspection and measurement of 80 DP x 20 degree PA. Has a 1/2 […]
UNKNOWN APPLICATION, 6 SPLINE APPROX. PLEASE CONFIRM IT IS CORRECT FOR YOUR APPLICATION.
Spur Gear 61 Teeth, 15.25″OD, 2.738″ Bore 6 Spline, 20 Degree, 2.50 Face. STRAIGHT SPLINE BOTH ENDS. 45.0 ROCKWELL C MINIMUM TEETH AND 55.0 ROCKWELL C MAXIMUM TEETH.
Spur Gear 61 Teeth, 15.25″OD, 2.738″ Bore 6 Spline, 20 Degree, 2.50 Face. MATERIAL DOCUMENT AND CLASSIFICATION. QQ-S-681 FED SPEC SINGLE MATERIAL RESPONSE OVERALL. STEEL COMP 150-125 OVERALL. 3.880 INCHES SECOND END. 3.880 INCHES FIRST END. 2.738 INCHES BOTH ENDS. NOMINAL DISTANCE BETWEEN BODY FACE AND RECESSED HUB END. 0.002 INCHES SECOND END. 0.002 INCHES […]
Spur Gear 61 Teeth, 15.25″OD, 2.738″ Bore 6 Spline, 20 Degree, 2.50 Face. MATERIAL DOCUMENT AND CLASSIFICATION. QQ-S-681 FED SPEC SINGLE MATERIAL RESPONSE OVERALL. STEEL COMP 150-125 OVERALL. 3.880 INCHES SECOND END. 3.880 INCHES FIRST END. 2.738 INCHES BOTH ENDS. NOMINAL DISTANCE BETWEEN BODY FACE AND RECESSED HUB END. 0.002 INCHES SECOND END. 0.002 INCHES […]
Spline Gage 33T24480 DP-45 Degree PA 0 Degree 11′ LH Helix w Setting Master. M M Precision – England. Model Serial 26058678 Serial 3714. Eff = 1.875. Federal Umaxum ED 10102 Digital Indicator with Instructions. Requires (2) CR2450 3V Batteries, not included. Used, overall in very nice condition, little cosmetic blemish on setting standard, requires […]