Prince Double Gear Pump. 976/. 86 Cu In, 9 Tooth 16/32 Spline, with Flow Divider
Double Gear Pump with Priority Flow Divider. Max PSI: Front: 2200 Rear: 2400. #16 SAE Inlet Ports (Common Inlet). #10 SAE Outlet Port (Front). #12 SAE Outlet Port (Rear) (Excess Flow). #6 SAE Outlet Port (Rear) (Controlled Flow). SAE 9 Tooth 16/32 Spline Shaft. Clockwise drive shaft rotation. Relief set at 1500 PSI. Priority Flow to be 3.0 GPM at 2000 RPM with minimum pressure on both excess and controlled flow ports. Bearings PTFE composite bearings are used due to the ability to handle heavy loads, low shaft speeds, and high levels of contamination. Engineering tests on the PTFE bearings indicate they will withstand bearing loads over twice as high as conventional steel backed aluminum bearings used in many pumps. The PTFE resin layer will absorb a high degree of contamination with out damage to the pump. Also since the PTFE layer is self lubricating, contamination from bearing wear in high load situations (when no oil film is present) is reduced. The side benefit from reduced friction under all conditions is a reduced consumption of power. Gears and drive shaft are hardened alloy steel of one piece construction. Special gear design: Non-symmetrical gear insures low noise and compactness. Dependable service: Balanced pressure loading insures small dispersion, good durability and maintains high performance. Perfect alignment: Through bore design provides perfect alignment of pump element and assures even bearing load. The item “Prince Double Gear Pump. 976/. 86 Cu In, 9 Tooth 16/32 Spline, with Flow Divider” is in sale since Friday, April 17, 2020. This item is in the category “Business & Industrial\Hydraulics, Pneumatics, Pumps & Plumbing\Pumps & Pump Accessories\Hydraulic Pumps”. The seller is “daltonhyd” and is located in Blaine, Tennessee. This item can be shipped to United States.
- Custom Bundle: No
- MPN: SP-F58
- Shaft Rotation: CW
- Modified Item: No
- Pump Action: Gear Pump
- Rated Pressure: 2200 PSI
- Inlet Port Diameter: #16 SAE
- Power Source: Hydraulic
- Hydraulic Pump Type: Hydraulic Gear Pump
- Country/Region of Manufacture: United States
- Front Section Cu. In. Displacement: .976
- Rated Power: 8.45 & 7.45 GPM @ 2000 RPM
- Rear Section Cu. In. Displacement: .86
- Reservoir Capacity: Does Not Apply
- Max RPM: 3500
- Brand: Prince
- Outlet Port Diameter: #10 SAE
- Mount: 2 Bolt “A” Flange
- Type: Hydraulic
Comments are currently closed.