Spur Gear 61 Teeth, 15.25″OD, 2.738″ Bore 6 Spline, 20 Degree, 2.50 Face. MATERIAL DOCUMENT AND CLASSIFICATION. QQ-S-681 FED SPEC SINGLE MATERIAL RESPONSE OVERALL. STEEL COMP 150-125 OVERALL. 3.880 INCHES SECOND END. 3.880 INCHES FIRST END. 2.738 INCHES BOTH ENDS. NOMINAL DISTANCE BETWEEN BODY FACE AND RECESSED HUB END. 0.002 INCHES SECOND END. 0.002 INCHES […]
Spline Gear Spindle Pulley Hub for 1 1/2 HP Vari Speed Bridgeport MIll USED. IMPORTANT PLEASE READ BEFORE PURCHASING. We do not guarantee functionality and make no claims regarding operation performance completeness or suitability for any specific purpose. Due to our lack of expertise and the wide variety of items we sell we cannot determine […]
Eaton 26003-RZK Hydraulic Gear Pump Splined Shaft 2-Bolt Flange NOS OEM. EATON 26003-RZK Hidráulic Gear Pump. 1.0625-12 UN-2B SAE O-Ring. 2-Bolt SAE A Flange. 875-14 UNF-2B SAE O-Ring.
FAM Stumabo 339253 SS Crosscut Bronze Splined Gear Z = 15m 3.75, 339.253 NEW. New in original factory packaging. You will receive exactly ass shown, view photos.
Type: Gear Hob Cutter (special / spline-type). Diametral Pitch: 4 DP. Pressure Angle: 20° PA. Starts: 1 THD (single-start). Pitch Diameter: 18.81. Spec / Drawing: WD-5838. Standard: MIL-CH / US spec.
Spline Gear Spindle Pulley Hub for 2 HP Vari Speed Bridgeport Mill I think 1537???? Timing Pulley Clutch Sleeve. IMPORTANT PLEASE READ BEFORE PURCHASING. We do not guarantee functionality and make no claims regarding operation performance completeness or suitability for any specific purpose. Due to our lack of expertise and the wide variety of items […]
New Old Stock Surplus. Original Package is Missing. Unit has been Repackaged. Mount Hub OD: 4. Mount Hole Spread C-C: 5-3/4″ 1/2″ ID Hole.
Technical Data: Model Number: AGT-SLCLB (Two-Section) Pump Type: Dual-chamber hydraulic gear pump Mounting Spec: 5/8 9-spline A2 mount Feed Type: Dual suction, dual feed Main Inlet Port Dedicated to drive system Auxiliary Inlet Port Dedicated to hydraulic attachments Flow Capacity: Approx. 6-12 GPM Operating Pressure: Up to 3,000 psi (21 MPa) Construction High-strength cast housing. […]
Two-Section Hydraulic Gear Pump For AGT Skid Steer Loader KTT23 PGP51088G3LP New. NEW Two-Section Hydraulic Gear Pump For AGT Skid Steer Loader KTT23 PGP51088G3LP. 1 × Hydraulic Pump. 100% New & High Quality. Model Number: AGT-SLCLB (Two-Section). Pump Type: Dual-chamber hydraulic gear pump. Mounting Spec: 5/8 9-spline A2 mount. Feed Type: Dual suction, dual feed. […]
