Complete Joint Assembly for Series 1 Outer Tube Tri-Lobe PTO, 1 3/8 6-Spline. This assembly contains a 1 3/8 6-spline quick disconnect yoke, universal joint, and a tri-lobe yoke for the outer tube of your PTO. Fits on our Outer Tube for Series 1 PTO. U-joint size: 22 x 54. Fits Bondioli & Pavesi part […]
Perfection Gear 1:1 Ratio 20HP 1750RPM Right Angle Gear Reducer 1-1/4 6-Spline. Input Shaft Diameter: 1.000. Vent: Not vented, will need to be vented prior to use. Output Shaft Diameter: 1-1/4 6-spline. Output Torque (lbs): 720. THIS IS A USED GEAR REDUCER. I BELIEVE IT HAS BEEN REBUILT. MOUNTING HOLE PATTERN IS 6X6″ WITH 9/16″ […]
For YOU, we constantly strive to find ways to improve our performance.
New Parker TB0195GM110AAAA Torque Motor 1 6-Spline Shaft. See pictures to see actual part available. New, unused as shown in the photographs. Message me with any questions.
194354 Loader Hydraulic 6-Spline Pump Drive Shaft Fits Ford New Holland 2N. DESCRIPTION One New Aftermarket Replacement Fits Ford Hydraulic Pump Drive Shaft Kit that fits Tractor models: 2N, 8N, 9N. Shaft: 13.06″ Long 6 Spline 0.750″ Shaft 0.187 Keyway Hydraulic Pump Hub Adaptor hub (bolts to crankshaft pulley) 3/4 inch Diameter, 6 spline center […]
75 HP Rotary cutter gearbox with 1-3/8 6-spline input. Shaft and a gear ratio of 1:1.46. Cast iron housing is sealed to protect the gears and bearings. The mounting plate has four bolt holes spaced 5.5 square. Gearbox has a piloted flange bottom to fit in a 5-5/8 pilot hole in the mower/cutter deck. Replaces […]
SC303219 Universal Fit Limiter Clutch 1-3/8″ 6-Spline 1-1/4″ x 7-1/16 Hole. One New Aftermarket Replacement Universal Limiter Clutch that fits several Borg Warner, MOdern, Sidewinder, Terrain King, Mohawk, Dimmick, Vermeer Harrington Models. 1-3/8″ 6-spline, 1-1/4″ x 7-1/16″ hole pattern, 1-1/4″ x 7-1/16 bolt hole spacing. Replaces Part Numbers CLC80-0009, SC303219. Reliable Aftermarket Parts, your trusted […]
New without factory packaging.
Weasler PTO Drive Shaft with 3/4 in.
Sale is for 1-PTO Shaft. Useable Length = 25″ – 32″ (This leaves about 2 shaft overlap).