Replacement output shaft for World Agritech Corp IM702 Rotary Cutter. This gearbox featured a 1-3/4″ X 20 spline input shaft and a 2″ (1.97) x 15 spline output shaft that had a threaded end for the 1-14 castle nut. The bottom of the gearbox housing would have 01-268 stamped onto the mounting flange. This shaft […]
Rotary Cutter OEM blade carrier (flywheel). This carrier fits the IM 600 and 602 Rotary mowers that were equipped with a 60-75 hp gear box. (CHECK MEASUREMENTS, on the International 6′ cutters, he used 3 different gearboxes). Each blade carrier is 17″ in diameter and has blade mount bolt holes 13.5″ apart on center. There […]
Rotary Cutter OEM blades carrier (flywheel). This carrier fits all of the IM Series 382, 422, 400, 402, 500, 502, 600 and 602 Rotary mowers that were equipped with a 40 hp gear box. Each blade carrier is 17″ in diameter and has blade mount bolt holes 13.5″ apart on center. There is a 1-1/2 […]
Replacement OEM blade carrier for World Agritech Corp IM Series 38″ – 72″ cut rotary cutters in both 3-point and pull type hitch with 75 hp gearboxes that have a 1.97 x 15 spline bottom shaft. This stump jumper has a 17″ diameter with 1-1/8″ bolt holes each with a key slot. The bolt holes […]
Rotary Cutter OEM blades carrier (flywheel). This carrier fits all of the IM Series 702 Rotary mowers that were equipped with a 75 hp gear box. Each blade carrier is 27″ in diameter and has blade mount bolt holes 23″ apart on center. There is a 2 diameter, 15 spline mounting hub welded into each […]