Date: September 11, 2017 Posted by: admin In: milwaukee

Milwaukee SDS-MAX/SPLINE Thin Wall Carbide Tipped Core Bit 6 in. Milwaukees Carbide Tipped Core Bits are ideal for drilling large holes where the depth is relatively shallow. The Core Bit cuts a kerf only. The usable depth of Thin Wall Core Bits ranges from 2-13/16 inches to 3-3/16 inches. The Thin Wall construction is ideal for smaller hammers and newer concrete. The inside core must be removed by the operator before deeper drilling can be accomplished. Multiple extensions and adapters are available to allow for deeper holes to be drilled. The appropriate drive shank must be used to drive the Core Bit. Use of Center Pin and Guide Plate is recommended for positioning and starting a 1-1/4 inch hole and larger. Use of Center Pin and Guide Plate is NOT recommended for positioning and starting a 1-1/8 inch hole or smaller. Milwaukee Carbide Tipped Core Bits are available from 1 inch to 6 inch diameters. Usable Cutting Depth 2-13/16 in. Use with 12 in. SPLINE Adapter Shank (48-03-3540) or 12 in. SDS-MAX Adapter Shank (48-03-3574). Use With 7-1/2 in. Use With Guide Plate 48-20-6163 and Centering Pin 48-20-6155. Includes Core Body with Guide Plate & Centering Pin. Type Masonry Drill Bits. Style Thick Wall for SDS-MAX or Spline. Cutting Depth 2-13/16 in. (1) Core Bit Body. (1) Guide Plate & Centering Pin. You must return an item in the same condition as it was received, not used or altered in any way. The item “Milwaukee 48-20-5065 SDS-MAX / SPLINE Thin Wall Carbide Tip Core Bit 6 in” is in sale since Sunday, March 07, 2010. This item is in the category “Business & Industrial\Light Equipment & Tools\Drills & Hammers\Rotary Hammer Drills”. The seller is “greatlakespowertools” and is located in Muskegon, Michigan. This item can be shipped to United States.

• Brand: Milwaukee
• Model: 6 in. Thin Wall Core Bit
• MPN: 48-20-5065 48-20-6163
• Bit Size: 6″
• UPC: 045242105601