Tag Archives: type

Shaper Cutters Involute Splines M2.5 Z-30 PA30 HSS USSR Disk Type

Shaper_Cutters_Involute_Splines_M2_5_Z_30_PA30_HSS_USSR_Disk_Type_01_ugsf

Shaper Cutters Involute Splines Disk Type. Used for splined connections according to DIN 5480, DIN 5482, ISO 4156, ANSI B92.2M, ANSI B. Module – 2.5. Number of teeth – 30. Pressure angle – 30 deg. Outside diameter – 79.03 mm. Hole diameter – 31.75 mm. Height – 15 mm. Accuracy – grade B. Material – […]

Shaper Cutters Involute Splines M3 Z-12 PA30 HSS USSR Shank Type Shaper Cutter

Shaper_Cutters_Involute_Splines_M3_Z_12_PA30_HSS_USSR_Shank_Type_Shaper_Cutter_01_zs

Shaper Cutters Involute Splines Type Shank. Used for splined connections according to DIN 5480, DIN 5482, ISO 4156, ANSI B92.2M, ANSI B. Number of teeth – 15. Pressure angle – 30 deg. Face width – 15 mm. Outside Dia dao – 40.88 mm. Length of total – 100mm. Morse Taper – B24 (shortened MT3). If […]

PTO Adapter Clamp Type 1-3/8 21 Spline Female 1-3/4 20 Spline Male 125 HP

PTO_Adapter_Clamp_Type_1_3_8_21_Spline_Female_1_3_4_20_Spline_Male_125_HP_01_nn

One New Aftermarket PTO Adapter Clamp Type 1-3/4″ 20 Spline Female 1-3/8″ 21 Spline Male 125 HP. 1-3/4″ Female, 20 Spline x 1-3/8″ Male, 21 Spline Increases PTO Shaft Length by 5-1/2″ Over Length: 7-7/8″ Heavy Duty: Over 70 h. Reliable Aftermarket Parts is in not affiliated in any way with OEM manufacturers. All OEM […]

Jiffy Air Tool 5 Thinline L Type Attachment 1/4-28 Threads Spline Shaft

Jiffy_Air_Tool_5_Thinline_L_Type_Attachment_1_4_28_Threads_Spline_Shaft_01_tz

JIFFY AIR TOOL 5 THINLINE L TYPE ATTACHMENT 1/4-28 THREADS – SPLINE SHAFT. CANNOT BE SURE IF THIS ATTACHMENT WAS MANUFACTURED BY JIFFY – BUT IT WAS REMOVED FROM A JIFFY AIR TOOL. WORKS CORRECTLY – TESTED. The item “JIFFY AIR TOOL 5 THINLINE L TYPE ATTACHMENT 1/4-28 THREADS SPLINE SHAFT” is in sale since […]

Shaper Cutters Involute Splines M2.5 Z-15 PA30 HSS USSR Shank Type Shaper Cutter

Shaper_Cutters_Involute_Splines_M2_5_Z_15_PA30_HSS_USSR_Shank_Type_Shaper_Cutter_01_zhxv

Shaper Cutters Involute Splines Type Shank. Used for splined connections according to DIN 5480, DIN 5482, ISO 4156, ANSI B92.2M, ANSI B. Module – 2.5. Number of teeth – 15. Pressure angle – 30 deg. Face width – 15 mm. Outside Dia dao – 41.45 mm. Length of total – 100mm. Morse Taper – B24 […]

Atlas Copco Piston Air Motor Type Mzf42b Spline Shaft 33mm Spare Parts

Atlas_Copco_Piston_Air_Motor_Type_Mzf42b_Spline_Shaft_33mm_Spare_Parts_01_zuf

1 ATLAS COPCO AIR MOTOR MODEL MZF42B SHAFT IS 33mm AS SHOWN IN PHOTOS SECONDHAND HAND USED ITEM. Unit is advertised elsewhere so can be removed at any time. Any questions please call 01733 841001 or 07710451309. Unit can be inspected prior to sale. The item “ATLAS COPCO PISTON AIR MOTOR TYPE MZF42B SPLINE SHAFT […]

W367687 Overrunning Clutch, Key Type, Type F5/1R-Right, 1 3/4 6 Spline

W367687_Overrunning_Clutch_Key_Type_Type_F5_1R_Right_1_3_4_6_Spline_01_mib

Overrunning Clutch, Key Type, Type F5/1R-Right, 1 3/4 6 Spline, W/ Clamp Bolt. 2400 Series Walterscheid F5/1R (RH Rotation) Overrunning Clutch, key type. 1-3/4ýÿ 6 Spline clutch with clamp bolt. Walterscheid Part No: W367687. 1 3/4 – 6 Spl Clamp Bolt. 2400 Series complete clutch. Fits the following models: Driveline > Clutch Walterscheid F5/1R: 2400. […]

Recent Posts

Archives

Categories