Tag Archives: cutters

Output Shaft for World Agritech IM702 Rotary Cutters with 15 splines Code 02-129

Output_Shaft_for_World_Agritech_IM702_Rotary_Cutters_with_15_splines_Code_02_129_01_yp

Replacement output shaft for World Agritech Corp IM702 Rotary Cutter. This gearbox featured a 1-3/4″ X 20 spline input shaft and a 2″ (1.97) x 15 spline output shaft that had a threaded end for the 1-14 castle nut. The bottom of the gearbox housing would have 01-268 stamped onto the mounting flange. This shaft […]

Shaper Cutters Involute Splines M1.25 Z-20 PA30 USSR Shank Type DIN 5480

Shaper_Cutters_Involute_Splines_M1_25_Z_20_PA30_USSR_Shank_Type_DIN_5480_01_eh

Shaper Cutters Involute Splines Type Shank. Used for splined connections according to DIN 5480, ISO 4156, ANSI B92.2M, ANSI B. Module – 1,25. Number of teeth – 20. Pressure angle – 30 deg. Face width– 16 mm. Outside Dia dao – 27.3 mm. Morse Taper – B18(shortened MT2). For other countries please contact me to […]

100 HP Gearbox T-Style 1-3/8 6 Spline Input & Output Shaft For 8′ & 10′ Cutters

100_HP_Gearbox_T_Style_1_3_8_6_Spline_Input_Output_Shaft_For_8_10_Cutters_01_hcs

For 8′ and 10′ Dual Spindle Rotary Cutters. Mounting Pattern (4) – 5/8″ Holes x 6″ Across x 3-1/4″ Center to Center Input/Output Shaft: 1-3/8″ Splined Gear Ratio: 1:1.21. Add to Favorite Sellers. 100 HP Gearbox T-Style 1-3/8″ 6 Spline Input & Output Shaft For 8′ & 10′ Cutters Mounting Pattern (4) – 5/8″ Holes […]

40HP Gearbox 1-3/8 6 Spline Input & 12 Spline Output Shaft For 4′ & 5′ Cutters

40HP_Gearbox_1_3_8_6_Spline_Input_12_Spline_Output_Shaft_For_4_5_Cutters_01_rq

Mounting Pattern (4) 5/8″ Holes x 6-1/2″ Pattern x 5″ Centers Bolt Holes: 5″ Side to Side 6-3/4″ Across 7″ from Input Shaft to Base Ratio: 1:1:47. Add to Favorite Sellers. 40HP Gearbox 1-3/8″ 6 Spline Input & 12 Spline Output Shaft For 4′ & 5′ Cutters Mounting Pattern (4) 5/8″ Holes x 6-1/2″ Pattern […]

Shaper Cutters Involute Splines M2.5 Z-30 PA30 HSS USSR Disk Type

Shaper_Cutters_Involute_Splines_M2_5_Z_30_PA30_HSS_USSR_Disk_Type_01_ugsf

Shaper Cutters Involute Splines Disk Type. Used for splined connections according to DIN 5480, DIN 5482, ISO 4156, ANSI B92.2M, ANSI B. Module – 2.5. Number of teeth – 30. Pressure angle – 30 deg. Outside diameter – 79.03 mm. Hole diameter – 31.75 mm. Height – 15 mm. Accuracy – grade B. Material – […]

Shaper Cutters Involute Splines M3 Z-12 PA30 HSS USSR Shank Type Shaper Cutter

Shaper_Cutters_Involute_Splines_M3_Z_12_PA30_HSS_USSR_Shank_Type_Shaper_Cutter_01_zs

Shaper Cutters Involute Splines Type Shank. Used for splined connections according to DIN 5480, DIN 5482, ISO 4156, ANSI B92.2M, ANSI B. Number of teeth – 15. Pressure angle – 30 deg. Face width – 15 mm. Outside Dia dao – 40.88 mm. Length of total – 100mm. Morse Taper – B24 (shortened MT3). If […]

Gear Shaper Cutter M1 Z-50 PA30°T1 HSS USSR Shaper Cutters Involute Splines

Gear_Shaper_Cutter_M1_Z_50_PA30_T1_HSS_USSR_Shaper_Cutters_Involute_Splines_01_lnnw

Sizes: da0 – 50mm; d1 – 20mm; B – 18mm; b0 – 7mm; d2 -31mm; d3 – 36mm. Shaper Cutters Involute Splines. Used for splined connections according to DIN 5480, DIN 5482, ISO 4156, ANSI B92.2M, ANSI B. Module – 1. Number of teeth – 50. Pressure angle – 30 deg. Accuracy – class B. […]

NEW PTO Shaft for Most 5′ & 6” Shearpin Rotary Cutters 6 Splined to 1 3/8 smoot

NEW_PTO_Shaft_for_Most_5_6_Shearpin_Rotary_Cutters_6_Splined_to_1_3_8_smoot_01_xscv

NEW PTO Shaft for Most 5′ & 6” Shearpin Rotary Cutters 6 Splined to 1 3/8 smooth. Medium/Heavy Duty Series 4 PTO Shaft. 1-3/8 6 Splined (540) on the Tractor End. 1-3/8″ Smooth with 1/2″ Shearpin Hole on the Cutter End. Minimum Working Length is 42.5. Maximum Working Length is 55.3. Included is 3 Grade […]

Recent Posts

Archives

Categories