Monthly Archives: November 2015

47 HP Series 5 PTO Shaft 1 3/8 6 Spline QD Yoke and Round Bore Shear Pin 34

Axle Bolts and Axle Shafts. Casted Hubs with Brushing. Casted Hubs with Roller Bearings. Ranch Rite is an authorized dealer of RPM PTO Shafts and Driveline Components. RPM R10152 – 47hp, Series 5 PTO Shaft. Series 5 PTO Shaft. 860mm 34 length (This measurement is Cross to Cross, with the Shaft completely collapsed). Tractor Side […]

Replacement Rotary Cutter 45 hp Gear Box 1 3/8 X 6 Spline Input Shaft

Replace your broken rotary cutter gearbox with this new replacement unit. Why rebuild when you can replace at such a low price! These gearboxes have been used by Worksaver, HawkLine, International, WAC, Big Bee, LMC, King Kutter, Midwest, Servis, Bush Hog, some Howse and many more. Note: Actual Gearbox may have a rounded housing or […]

REPLACEMENT ROTARY CUTTER GEARBOX, 6-SPLINED INPUT SHAFT, 40HP, FREE SHIPPING

Get Vendio Gallery – Now FREE! 389 West Meadowlake Parkway. Hours 7:30 to 5:00 EST M-F till noon on Saturday. This gearbox fits several different makes of 4′, 5′ and some 6′ rotary cutters. I sell a lot of these boxes every year for several different applications and carry ALL REPLACEMENT PARTS for this box, […]

Milwaukee 48-20-5155 SDS-MAX / Spline 4 in. Thick Wall Carbide Tip Core Bit

Milwaukee SDS-MAX/Spline Thick Wall Carbide Tipped Core Bit 4 in. Milwaukees Carbide Tipped Core Bits are ideal for drilling large holes where the depth is relatively shallow. The Core Bit cuts a kerf only. The usable depth of Thick Wall Core Bits is 4-1/16 inches. Thick Wall Core Bits are used for cured/seasoned concrete or […]

Makita HR4041C 1-9/16-Inch Rotary Hammer Spline Drill with 2 bits No Reserve

You are viewing a Makita Hammer Drill. 1 This Hammer Drill is pre-owned, but appears to have been used very little and is in great and working condition! 2 This is the Makita HR4041C 1-9/16-Inch Rotary Hammer Spline Drill. 3 This lighter comes with the original carrying case and 2 drill bits. If you have […]

New Slip Clutch for tractor pto bush hog rotary cutter 1 3/8 x 6 spline male

Providing quality parts and accessories to the hard working farmer at reasonable prices. We have over 30 years experience in agriculture. We know the importance of providing fast service and great customer service. We specialize in hay equipment and parts. New Torque Limiter for use in converting rotary cutters from shear pin type to slip […]

PTO SHAFT HEAVY DUTY SERIES 6 WithSLIP CLUTCH W-1 3/4 20 SPLINE IMPLEMENT END

Get Vendio Gallery – Now FREE! 389 West Meadowlake Parkway. Hours 7:30 to 5:00 EST M-F till noon on Saturday. Up for sale is (1) Heavy Duty series 6 pto shaft for most of your 5′ & 6′ & some 7′, 8′ and 10′ Rotary mowers(depending on the style). It has many different applicaions, but […]

Milwaukee 48-20-5160 SDS-MAX / Spline Thick Wall Carbide Tip Core Bit 5 in

Milwaukee SDS-MAX/Spline Thick Wall Carbide Tipped Core Bit 5 in. Milwaukees Carbide Tipped Core Bits are ideal for drilling large holes where the depth is relatively shallow. The Core Bit cuts a kerf only. The usable depth of Thick Wall Core Bits is 4-1/16 inches. Thick Wall Core Bits are used for cured/seasoned concrete or […]

JOHN DEERE MX7 COMPLETE PTO SHAFT- HEAVY DUTY 4 DISC SLIP CLUTCH 21 SPLINE I. E

Get Vendio Gallery – Now FREE! 389 West Meadowlake Parkway. Hours 7:30 to 5:00 EST M-F till noon on Saturday. We have this listed for the JD MX7 but please check yours to make sure they are the same and keep in mind this shaft will fit different applications of machines and manufactures. Heavy duty […]

Recent Posts

Archives

Categories