New Birotational Gear Pump 4.46″ CID, 7/8″ 13 Tooth Spline, 252260. Cubic Inch Displacement(CID). 11/16 chromed and ground steel piston. The SP20B pump now utilizes self-lubricating thrust blocks that eliminate the need for separate wear plates. They are made from a high strength aluminum alloy with exceptional anti-galling properties. This new thrust block design also […]
Hydraulic Gear Pump 2-6 GPM. 9 Tooth Spline Shaft. SAE A-2 Bolts CCW Aluminium NEW. Hydraulic Gear Pump 0.38 Cu In/Rev. Gear pumps of Magister Hydraulics are manufactured with thru-bolt of rolled aluminium, mounting flanges and rear covers by cast aluminium for mobile machines, have high operational and strength characteristics. The seals reduce internal flow […]
Hydraulic Gear Pump 1-4 GPM. 9 Tooth Spline Shaft. SAE A-2 Bolts CW Aluminium NEW. Hydraulic Gear Pump 0.27 Cu In/Rev. Gear pumps of Magister Hydraulics are manufactured with thru-bolt of rolled aluminium, mounting flanges and rear covers by cast aluminium for mobile machines, have high operational and strength characteristics. The seals reduce internal flow […]
Hydraulic Gear Pump 2-6 GPM. 9 Tooth Spline Shaft. SAE A-2 Bolts CW Aluminium NEW. Hydraulic Gear Pump 0.38 Cu In/Rev. Gear pumps of Magister Hydraulics are manufactured with thru-bolt of rolled aluminium, mounting flanges and rear covers by cast aluminium for mobile machines, have high operational and strength characteristics. The seals reduce internal flow […]
Hydraulic Gear Pump 2-9 GPM. 9 Tooth Spline Shaft. SAE A-2 Bolts CW Aluminium NEW. Hydraulic Gear Pump 0.61 Cu In/Rev. Gear pumps of Magister Hydraulics are manufactured with thru-bolt of rolled aluminium, mounting flanges and rear covers by cast aluminium for mobile machines, have high operational and strength characteristics. The seals reduce internal flow […]
Double Gear Pump with Priority Flow Divider. Max PSI: Front: 2200 Rear: 2400. #16 SAE Inlet Ports (Common Inlet). #10 SAE Outlet Port (Front). #12 SAE Outlet Port (Rear) (Excess Flow). #6 SAE Outlet Port (Rear) (Controlled Flow). SAE 9 Tooth 16/32 Spline Shaft. Clockwise drive shaft rotation. Relief set at 1500 PSI. Priority Flow […]
Displacement (Front & Rear). Max PSI: Front: 3000 Rear: 2700. #20 SAE Inlet Ports. #16 SAE Outlet Ports. SAE 13 Tooth 16/32 Spline Shaft. Counter Clockwise drive shaft rotation. Side inlets and outlets. Bearings PTFE composite bearings are used due to the ability to handle heavy loads, low shaft speeds, and high levels of contamination. […]
GEARTEK D-Series Hydraulic Pump, MODEL D30L-1C-UT, 1-1/4-14 TOOTH SPLINE. · 1-1/4-14 TOOTH SPLINE · RATED PRESSURE 2500 PSI · COUNTERCLOCKWISE ROTATION · HEAVY DUTY SLEEVE TYPE BEARINGS · DOUBLE VITON SHAFT SEALS STANDARD · CAST IRON THROUGHOUT · PRESSURE COMPENSATED THRUST PLATES. You are welcome to use your own carrier as well. All items are […]
Chief Pump Gear 5.5 CID, 1 3/8 Dia, 6 Tooth Internal Spline, 2500 PSI, 252557. Model GP-PTO is a Power Take Off gear pump constructed with cast iron end plates and an aluminum center section. It offers 4 displacement sizes from 3.41 to 9.76 in3/rev (56-160 cm3/rev). Standard drive is 1 3/8 diameter 6-tooth female […]
Disc Mower Gear Pod For Fort, Morra, Panorama, Long, First Choice, Yellow Jacket, MF22 Series disc mowers. Makes a great spare part to have on hand to minimize downtime. See my other listings for additional parts for these disc mowers. The item “34 Tooth / 18 Spline Disc Mower Gear Pod For Fort, Morra, Disc […]