Milwaukee 48-20-5478 3-9/16-Inch X 11-3/8-Inch One Piece Spline Hammer Core Bit. Milwaukees one piece carbide tipped core bits are ideal for drilling large holes where the depth is relatively shallow. The core bit cuts a kerf only. The inside core must be removed by the operator before deeper drilling can be accomplished. Use of centering […]
Milwaukee 48-20-5482 4-Inch X 11-3/8-Inch One Piece Spline Hammer Core Bit. Milwaukees one piece carbide tipped core bits are ideal for drilling large holes where the depth is relatively shallow. The core bit cuts a kerf only. The inside core must be removed by the operator before deeper drilling can be accomplished. Use of centering […]
Milwaukee 48-20-5155 SDS-MAX and SPLINE Thick Wall Carbide Tipped Core Bit 4. Milwaukee’s SDS-Max and Spline Thick Wall Core Bits are used for drilling large through holes into brick, block, concrete. Includes core bit, guide plate, and centering pin. Usable Cuting Depth 4-1/16. Use with 12″ or 18″ SPLINE Adapter Shanks (48-03-3564, 48-03-3565) and 12″ […]
9 masonry concrete core Drill Bits Spline for hammer drilling. 3 Shanks – 3 pilot drill bits Sizes are: 1 3/16″ (30mm) 1 3/8″ (35mm) 1 1/2″ (40mm) 1 3/4″ (45mm) 2″ (50mm) 2″ 1/4 (55mm) 2.6″ (65 mm) 2 3/4″ (70mm) 3 (76mm). The item “9 masonry concrete core Drill Bits Spline for hammer […]
Mouseover image to zoom. Spline shank works with all standard spline chucks. One piece core bit with a 4 diameter and integral shank with centering drill. Integral shank provides better power transmission. One (1) 4″ X 7″ X 12 Spline Shank Core Bit. If an item ships for free to a commercial address it will […]
Milwaukee 48-20-5060 5-Inch SDS-MAX and SPLINE Thin Wall Carbide Tipped Core Bit. Milwaukee’s SDS-Max and Spline Thin Wall Core Bits are used for drilling large through holes into brick, block, concrete. Includes core bit, guide plate, and centering pin. Usable Cuting Depth 2-13/16. Use with 12″ SPLINE Adapter Shank (48-03-3540) or 12″ SDS-MAX Adapter Shank […]
Milwaukee 48-20-5484 4-Inch X 22-Inch One Piece Spline Core Hammer Bit. Milwaukees one piece carbide tipped core bits are ideal for drilling large holes where the depth is relatively shallow. The core bit cuts a kerf only. The inside core must be removed by the operator before deeper drilling can be accomplished. Use of centering […]
Milwaukee 48-20-5165 SDS-MAX and SPLINE Thick Wall Carbide Tipped Core Bit 6. Milwaukee’s SDS-Max and Spline Thick Wall Core Bits are used for drilling large through holes into brick, block, concrete. Includes core bit, guide plate, and centering pin. Usable Cuting Depth 4-1/16. Use with 12″ or 18″ SPLINE Adapter Shanks (48-03-3564, 48-03-3565) and 12″ […]
Milwaukee 48-20-5160 SDS-MAX and SPLINE Thick Wall Carbide Tipped Core Bit 5. Milwaukee’s SDS-Max and Spline Thick Wall Core Bits are used for drilling large through holes into brick, block, concrete. Includes core bit, guide plate, and centering pin. Usable Cuting Depth 4-1/16. Use with 12″ or 18″ SPLINE Adapter Shanks (48-03-3564, 48-03-3565) and 12″ […]
Milwaukee 48-20-5065 SDS-MAX and SPLINE Thin Wall Carbide Tipped Core Bit 6. Milwaukee’s SDS-Max and Spline Thin Wall Core Bits are used for drilling large through holes into brick, block, concrete. Includes core bit, guide plate, and centering pin. Usable Cuting Depth 2-13/16. Use with 12″ SPLINE Adapter Shank (48-03-3540) or 12″ SDS-MAX Adapter Shank […]