Replacement Rotary Cutter gearbox, 40hp rated, 1-3/8″ smooth input shaft with 1/2″ shear bolt hole and circlip groove, 1.57 X 12 tapered spline output shaft and 1:1.47 speed up ratio. These gearboxes have a square housing configuration and are identical in mounting and ratio to the round configuration gearboxes. These are original equipment gearboxes on […]
John Deere Unstyled B 10 Spline Bolt In Rear Wheel Axle Hub Part number: B2187R Used on the unstyled John Deere B; this is for round spoke wheels, or cast centers. You are getting one hub. The hub is in good, useable condition. It is not cracked or repaired. The inner splines for the axle […]
White Hydraulic Motor Part # RE32080500. This motor is new and unused old stock. 4 bolt mount > 14 spline shaft 1.230od approx. > 2 hydraulic line feed ports. 10″ in length x 5″ in diameter. Mount holes measure approx. 3-15/16″ wide X 1-5/8″ high. Items not paid for within the 7 day period are […]
White Hydraulic Motor Part # RE32080500. This motor is new and unused old stock. 4 bolt mount > 14 spline shaft 1.230od approx. > 2 hydraulic line feed ports. 10″ in length x 5″ in diameter. Mount holes measure approx. 3-15/16″ wide X 1-5/8″ high. Items not paid for within the 7 day period are […]
Replacement universal fit stump jumper, fits a lot of the Rotary Cutters with larger blade carriers and gearboxes with a 1.57 X 12 tapered spline output shaft like some of the John Deere products. This stump jumper is 27″ diameter at the top, has 1-1/8″ bolt holes with a key slot that are 21 on […]
John Deere A3524R 12 spline A hub set — Nine bolt hub. The bolt holes look good. Splines look good too. Fits A up to 487999. We have lots of new, used, and rebuilt parts available the following John Deere models: A, B, D, G, H, M, R, 320, 330, 40, 420, 430, 50, 520, […]
CASTING NUMBER IS HARD TO READ BUT WE BELIEVE IT IS A3150R THIS IS IN DECENT USED CONDITION. THERE ARE NO CRACKS, BREAKS OR WELDS. THIS HAS SOME SURFACE RUST ON IT. THIS IS VERY HARD TO FIND. THIS IS FOR 10 SPLINE AXLES. THIS WILL FIT ON JOHN DEERE UNSTYLED A TRACTORS. PLEASE SEE […]
THIS HAS THE BIG ROUND SPOKES ON IT. THIS HAS A 12 SPLINE HUB ON IT BUT THIS RIM WILL WORK ON OTHER JOHN DEERE TRACTORS WITH A CHANGE OF THE HUB. THE VALVE STEM HOLE IS NICE. THERE ARE NO CRACKS, BREAKS OR WELDS. THERE IS SOME LIGHT SURFACE RUST BUT WILL CLEAN UP […]
White Hydraulic Motor Part # RE32080500. This motor is new and unused old stock. 4 bolt mount > 14 spline shaft 1.230od approx. > 2 hydraulic line feed ports. 10″ in length x 5″ in diameter. Mount holes measure approx. 3-15/16″ wide X 1-5/8″ high. Items not paid for within the 7 day period are […]
John Deere B 12 spline B1678R hubs — Nine bolt hub set of two. No cracks or welds. We have lots of new, used, and rebuilt parts available the following John Deere models: A, B, D, G, H, M, R, 320, 330, 40, 420, 430, 50, 520, 530, 60, 620, 630, 70, 720, 730, 80, […]