HIGH FLOW 6 SPLINE 200cc HYDRAULIC MOTOR
1 3/8 x 6 Spline Standard Agricultural ASAE Spline Designed to Drive through Bare-co Spring Cushion Freewheel Coupling. 200cc 12.2 cu in/Rev Max. 80 L/m 21 US gal/m. 1200 psi 83 bar. 177 ft lbs 240 Nm. 2300 psi 158 bar. 347 ft lbs 470 Nm. 3200 psi 220 bar. 465 ft lbs 630 Nm. 100 L/m 26 US gal/m. 162 ft lbs 220 Nm. 339 ft lbs 460 Nm. 461 ft lbs 625 Nm. 125 L/m 33 US gal/m. 159 ft lbs 215 Nm. 450 ft lbs 610 Nm. Ports – 7/8″ UN “O Ring. Roller type Gear Stator. Disc Valve linked to Roller Shaft via Drive Link. Output shaft supported by tapered roller bearings. High pressure motor seals. Cross port relief required for pressure spikes. These motors are suitable for continuous operation under rough operating conditions such as high operating pressures, thin oil, or frequent reverse cycling. The tapered roller bearings make the motors suitable for absorbing static and dynamic radial loads. The drive link and balanced disc valve minimise hydraulic and mechanical losses. This design produces motors with high efficiency, even at high pressures, and good starting chracteristics. 125 L/min 33 US gal/min. The item “HIGH FLOW 6 SPLINE 200cc HYDRAULIC MOTOR” is in sale since Friday, April 6, 2018. This item is in the category “Business & Industrial\Hydraulics, Pneumatics, Pumps & Plumbing\Hydraulic & Pneumatic Motors”. The seller is “greenestractorcompanyllcparts” and is located in Sneedville, Tennessee. This item can be shipped to United States.
- Brand: BARE-CO
- MPN: B8710