Mar
6
2017
Spline grinding machine WERNER SKRa. Diameter of grinding 10-150mm. Length of grinding 750mm. Height of centers 180 mm. The hole diameter of the spindle 90 mm. Power consumption of the machine 10 kW. Machine weight 6.5t. Machine is in very good condition. Few words about us. Evelin of America Corporation was established in 1998 in […]
Set of seven internal spline shaped machine pull broaches. Sizes as follows from top to bottom in first picture. 10 splines, 1.516″ measured from root to root, 1.834″ measured across opposing splines by 66 long. 6 splines, 0.896″ measured from root to root, 1.1245″ measured across opposing splines by 57 long. 6 splines, 0.796″ measured […]
Runs well, works fine – but will not hold a tight enough tolerance for us. The Type A machine’s have a bushing for the spindle and this one is worn. Can not get better than. 002 TIR with a new chuck on the machine. Our shaft and spline work is too tight on the tolerance […]