Hydraulic Gear Pump 2-9 GPM. 9 Tooth Spline Shaft. SAE A-2 Bolts CW Aluminium NEW. Hydraulic Gear Pump 0.61 Cu In/Rev. Gear pumps of Magister Hydraulics are manufactured with thru-bolt of rolled aluminium, mounting flanges and rear covers by cast aluminium for mobile machines, have high operational and strength characteristics. The seals reduce internal flow […]
Hydraulic Gear Pump 4-12 GPM 9 Tooth Spline Shaft SAE A-2 Bolts CW Cast Iron. Displacement – 0.97 Cubic Inches. Shaft Type -&#######xA0;9 Tooth Spline Shaft. Mounting Flange – SAE A-2 Bolts. Outlet Port – SAE 10. Inlet Port – SAE 12. MAX Working Pressure – 3600 PSI. Direction – Clockwise (Right). 4 – 12 […]
HYDRAULIC PUMP 9 SPLINE FOR BOBCAT 653 751 753 763 773 7753. NEW CONDITION AS SHOWN IN PICTURE. THE G SERIES WITH TRIANGLE SHAPED HEAD LIGHTS DOES NOT USE THIS PUMP. A CONTAMINATED SYSTEM SHOULD BE COMPLETELY FLUSHED BY AN AUTHORIZED DEALER. USE NEW, CLEAN FLUID AND FILTERS. THIS FITS THE FOLLOWING BOBCAT: 653, 751 […]
HYDRAULIC PUMP 9 SPLINE FOR BOBCAT 653 751 753 763 773 7753. NEW CONDITION AS SHOWN IN PICTURE. THE G SERIES WITH TRIANGLE SHAPED HEAD LIGHTS DOES NOT USE THIS PUMP. A CONTAMINATED SYSTEM SHOULD BE COMPLETELY FLUSHED BY AN AUTHORIZED DEALER. USE NEW, CLEAN FLUID AND FILTERS. THIS FITS THE FOLLOWING BOBCAT: 653, 751 […]
This is a new never used 11 Spline 2 Bolt Blue Hydraulic Motor. Any questions feel free to ask. IF YOU HAVE ANY QUESTIONS GIVE US A CALL OR VISIT THE WEBSITE (Same as our username Farwestproductsales). UPS does not deliver to PO Box addresses… Feel free to ask any questions you may have, also […]
IMPORTANT: THE PUMP SHAFT MUST BE ROTATED IN THE DIRECTION ORDERED ONLY (COUNTER CLOCKWISE). ROTATION IN THE WRONG DIRECTION CAN LEAD TO SHAFT LEAKAGE, LACK OF FLOW AND POTENTIAL SEAL FAILURE. Proven high quality robust design successfully operating in many high volume applications. Hydraulic Gear Pump General Data: SAE A, 2 bolt mounting flange Up […]
IMPORTANT: THE PUMP SHAFT MUST BE ROTATED IN THE DIRECTION ORDERED ONLY (CLOCKWISE). ROTATION IN THE WRONG DIRECTION CAN LEAD TO SHAFT LEAKAGE, LACK OF FLOW AND POTENTIAL SEAL FAILURE. Proven high quality robust design successfully operating in many high volume applications. Hydraulic Gear Pump General Data: SAE A, 2 bolt mounting flange Up to […]
Hello All and thanks for stopping by. Up for sale/offers here is a hydraulic motor. It has a two bolt flange and a splined shaft. I don’t know anything else, please ask questions and I can try to get numbers off the unit that might help. Part appears to be either a NOS unit, or […]
IMPORTANT: THE PUMP SHAFT MUST BE ROTATED IN THE DIRECTION ORDERED ONLY (CLOCKWISE OR COUNTERCLOCKWISE). ROTATION IN THE WRONG DIRECTION CAN LEAD TO SHAFT LEAKAGE, LACK OF FLOW AND POTENTIAL SEAL FAILURE. Proven high quality robust design successfully operating in many high volume applications. Hydraulic Gear Pump General Data: 12cc/rev. 732in^3/rev SAE A, 2 bolt […]
Hydraulic pump Assembly: Splined Shaft, 50 cm, 7/8 Discharge Port. John Deere: JD300, JD400, JD401, JD600, JD700, JD760. John Deere: 2130, 3020, 3030, 3130, 4000, 4020, 4040, 4040S, 4240, 4240S, 4320, 4430, 4440, 4520, 4620, 4630. Please verify this is the correct pump for your application; some models listed may use a different pump. Parts […]