https://businessindustrialspline.org Wed, 12 Aug 2026 08:11:43 +0000 en-CA hourly 1 https://wordpress.org/?v=4.1.1 https://businessindustrialspline.org/diamond-mowers-33-splined-shaft-axle-shaft-left-hand-threaded-14-spline/ https://businessindustrialspline.org/diamond-mowers-33-splined-shaft-axle-shaft-left-hand-threaded-14-spline/#comments Wed, 12 Aug 2026 08:11:43 +0000 https://businessindustrialspline.org/diamond-mowers-33-splined-shaft-axle-shaft-left-hand-threaded-14-spline/








This sale is for One Axle shaft. (Item is new, the outer box is distressed). Please verify fitment before purchasing. See pictures for more details and information. Diamond Mowers 33 Splined Shaft Axle Shaft left hand Threaded + 14 spline. Appears unused or very lightly handled with clean, sharp splines and intact machining marks. Overall surface is bright with a few light storage scuffs and small discoloration spots, but no bends, cracks, or heavy corrosion visible. Brand: Diamond Mowers (no maker marks visible; see printed spec sheet shown in photos for additional reference). Item: Heavy-duty straight steel splined shaft, suitable for use as a drive shaft, axle shaft, or coupler shaft in automotive, off-road, or industrial applications. Design details: One end features a long externally splined section with multiple straight splines for engagement with a matching female coupler or drive flange. The opposite end is a smooth round shaft terminating in a short male threaded section with a machined shoulder. Materials and finish: Solid steel construction with machined surfaces and bright metal finish on the shaft and splines. Measurements: Exact measurements are not printed on the item; a tape measure is shown in the photos for scale only. Special notes: No UPC, EAN, or visible part number on the shaft itself; a printed product page is photographed, but the specific brand name is not clearly legible. So we know how to best service you.

]]> https://businessindustrialspline.org/diamond-mowers-33-splined-shaft-axle-shaft-left-hand-threaded-14-spline/feed/ 0 https://businessindustrialspline.org/axle-shaft-rear-passenger-right-side-for-wrangler-jk-2018-32-spline-20047853/ https://businessindustrialspline.org/axle-shaft-rear-passenger-right-side-for-wrangler-jk-2018-32-spline-20047853/#comments Tue, 11 Aug 2026 20:10:41 +0000 https://businessindustrialspline.org/axle-shaft-rear-passenger-right-side-for-wrangler-jk-2018-32-spline-20047853/






Axle Shaft Rear Passenger Right Side compatible with Wrangler JK 2018 32 Spline 2004785-3 68003558. L Axle; 5 X 4.5 in. Wheel Bolt Pattern; Bolt in Axle Ty 5? Part Name:Axle Shaft 6? Spline Quantity:32 Spline 7? Built Standard: Built with high standard and care to meet industry standards for quality control, ensuring reliable and consistent performance 8? Material: the item is crafted using materials, carefully selected for their superior strength and durability, ensuring super-quality and performance. For Wrangler JK 2018. Wheel Bolt Pattern; Bolt in Axle Ty. Virgin Islands (VI), Guam (GU), Northern Mariana Islands (MP), (AS), (AK).. We encourage customers placing orders to these areas to. Thank you for your understanding.

]]> https://businessindustrialspline.org/axle-shaft-rear-passenger-right-side-for-wrangler-jk-2018-32-spline-20047853/feed/ 0 https://businessindustrialspline.org/case-ih-magnum-large-spline-1000-pto/ https://businessindustrialspline.org/case-ih-magnum-large-spline-1000-pto/#comments Mon, 10 Aug 2026 20:08:39 +0000 https://businessindustrialspline.org/case-ih-magnum-large-spline-1000-pto/



Used large 1000 PTO shaft for magnum tractors. Will fit most magnums with interchangeable PTO From years 2011 on. I can get OEM part number added soon.

]]> https://businessindustrialspline.org/case-ih-magnum-large-spline-1000-pto/feed/ 0 https://businessindustrialspline.org/front-left-cv-axle-shaft-spline-quantity-kia-rio-2012-2017/ https://businessindustrialspline.org/front-left-cv-axle-shaft-spline-quantity-kia-rio-2012-2017/#comments Mon, 10 Aug 2026 08:07:43 +0000 https://businessindustrialspline.org/front-left-cv-axle-shaft-spline-quantity-kia-rio-2012-2017/








2? Inboard Spline Quantity: 28 3? Part_Number:66-3761, NCV75099, KA-8099,495001W400, CSA32512 4? ABS Tone Ring Tooth Quantity:52 5? Outboard Spline Quantity:30. What is Axle Shaft. An axle shaft is a component of a vehicle’ drivetrain that transmits power from the transmission to the wheels. Axle shafts are commonly used in front-wheel drive vehicles, as well as some all-wheel drive and rear-wheel drive vehicles. They are typically made from high-strength steel or other materials, and are suited to withstand the stresses and strains of daily driving. 1-hundred percent unused product in factory packaging. Ensures quality and performance of the product. Inboard Spline Quantity: 28. 66-3761, NCV75099, KA-8099,495001W400, CSA32512. ABS Tone Ring Tooth Quantity. How to install Axle Shaft. Raise the vehicle: Use a jack to raise the vehicle and support it securely on jack stands. Take out the axle shaft: To begin, you will need to Take out the axle shaft from the vehicle. Install the new axle shaft: Next, slide the new axle shaft into place, aligning the splines with the corresponding splines in the transmission. Be sure to also align the flexible joint at the other end of the shaft. Secure the axle shaft: Use the appropriate bolts or fasteners to secure the axle shaft in place. Reinstall the other components: Reinstall any other components that were removed, such as the brakes and wheel. Check the transmission fluid: Before starting the vehicle, check the transmission fluid level to ensure it is at the proper level. Test the vehicle: Test the vehicle to make sure the new axle shaft is functioning properly.

]]> https://businessindustrialspline.org/front-left-cv-axle-shaft-spline-quantity-kia-rio-2012-2017/feed/ 0 https://businessindustrialspline.org/new-8-58-6posi-unit-30-spline-10-bolts-limited-slip-locker-for-chevrolet-s/ https://businessindustrialspline.org/new-8-58-6posi-unit-30-spline-10-bolts-limited-slip-locker-for-chevrolet-s/#comments Sun, 09 Aug 2026 08:05:44 +0000 https://businessindustrialspline.org/new-8-58-6posi-unit-30-spline-10-bolts-limited-slip-locker-for-chevrolet-s/







Please provide the VIN of the car so that we can check if it is suitable for you??? Introductions: The limited-slip differential is similar to the positraction differential, but allows the wheel with traction to have only a limited amount of greater power than the wheel that is slipping. A limited-slip differential will prevent the tire with less traction from separately spinning. Smooth 6 L/min Fast Flow: Hate slow, messy refills, This metal jerry can delivers up to 6 L/min w/a wide 20 mm hose and snap spout, giving you smooth, splash-free pours without the annoying “glug”. Secure Anti-Loosening: Tired of spills, This metal fuel container has a leak-proof sealing ring that stays tight even on rough rides, keeping every drop secure and cutting down on fuel waste. Compact Size: Need extra fuel on the go, This 5.3Gal/20L metal gas can (14.2 x 7.1 x 20.1 inches) slips into your trunk w/ease. Lightweight yet practical, it’s ideal for road trips, camping, or outdoor work. If an unit is received defective, of course we take it back or replace it. If the unit is received as expected, we must charge for our expenses if you want to send it back. Thank you for visiting my store! Our warehouses are located in many regions around the United States. Prioritize the best quality logistics solutions to transport packages. At the same time. Have any after-sales problems. Left Driver Power Liftgate Actuator Hatch fit for GMC Terrain 10-15 SUV 23432304. Women’s Secret Bottle-Vaginal Probiotics for Women pH Balance Health Supplement. Passenger Side Mirror Glass Heated Convex fit for Dodge Ram 1500 2019-22 684020. Power Steering Pump w/Pulley fit for Toyota Corolla Matrix fit for Pontiac Vibe. 1x Rear Left Electric Window Regulator fit for 98-03 Dodge Durango 00-04 Dakota. Rear Driveshaft Center Bearing + U Joint Kit fit for Ford F250 F350 Super Duty.

]]> https://businessindustrialspline.org/new-8-58-6posi-unit-30-spline-10-bolts-limited-slip-locker-for-chevrolet-s/feed/ 0 https://businessindustrialspline.org/bringing-a-complex-b2b-platform-to-life-with-3d-design-using-spline-elecctro-by-lynksen/ https://businessindustrialspline.org/bringing-a-complex-b2b-platform-to-life-with-3d-design-using-spline-elecctro-by-lynksen/#comments Sat, 08 Aug 2026 20:04:33 +0000 https://businessindustrialspline.org/bringing-a-complex-b2b-platform-to-life-with-3d-design-using-spline-elecctro-by-lynksen/ ]]> https://businessindustrialspline.org/bringing-a-complex-b2b-platform-to-life-with-3d-design-using-spline-elecctro-by-lynksen/feed/ 0 https://businessindustrialspline.org/front-right-cv-axle-shaft-female-spline-qty-for-for-1-5l-2009-2012/ https://businessindustrialspline.org/front-right-cv-axle-shaft-female-spline-qty-for-for-1-5l-2009-2012/#comments Sat, 08 Aug 2026 08:03:41 +0000 https://businessindustrialspline.org/front-right-cv-axle-shaft-female-spline-qty-for-for-1-5l-2009-2012/








NCV36011,44305TK6A00,17010078,66-4268,44306TK6A50,44306TK6A00, HO-8417. 22.44 in 570 mm.

]]> https://businessindustrialspline.org/front-right-cv-axle-shaft-female-spline-qty-for-for-1-5l-2009-2012/feed/ 0 https://businessindustrialspline.org/pto-shaft-37-59-1-38-6-spline-both-ends-series-4-no-slip-clutch-yellow/ https://businessindustrialspline.org/pto-shaft-37-59-1-38-6-spline-both-ends-series-4-no-slip-clutch-yellow/#comments Fri, 07 Aug 2026 20:02:41 +0000 https://businessindustrialspline.org/pto-shaft-37-59-1-38-6-spline-both-ends-series-4-no-slip-clutch-yellow/








PTO Shaft, 37″-59″ PTO ShaftFit for Bush Hog, Finish Mower, Tractor 1-3/8 PTO Drive Shaft 6 Splines Both Ends PTO Driveline Shaft, Series 4 PTO Shaft without Slip Clutch (Yellow). 1?? suitable Specifications? Compressed Length: 37 in/950 mm; Extended Length: 59 in/1500 mm. It has 35 Hp, 26 Kw, 460 Nm torque at 540 rpm, 55 Hp, 40 Kw, 380 Nm torque at 1000 rpm 2?? 6 Spline & 6 Splines Ends? Constructed with a 6-spline tractor end and a 6 Splines implement end, our brush hog PTO shaft has a standard size of 1-3/8 inches. It can match perfectly with the same size and type of implements and tractors, providing magnificent driving force for your machinery. Your machinery will be running like never before. 3?? Reliable and Durable? Our PTO shaft is made of a solid 20CrMnTi carburized steel universal joints and a Q345 steel tube inside the shield, sturdy and durable 4?? Easy Assembly&Safer Use? As a high-efficient power transmission tool, our PTO extender shaft can be easily assembled for effortless Easy Installation. Note: Please check the description and compatibility chart and check the detail information at the Product description before ordering; If you are not sure whether our parts fit your vehicle please provide the information of your vehicle to us to confirm. Virgin Islands (VI), Guam (GU), Northern Mariana Islands (MP), (AS), (AK).. We encourage customers placing orders to these areas to. Thank you for your understanding.

]]> https://businessindustrialspline.org/pto-shaft-37-59-1-38-6-spline-both-ends-series-4-no-slip-clutch-yellow/feed/ 0 https://businessindustrialspline.org/cv-axle-shaft-front-left-right-bolt-on-spline-15-20-silverado-sierra-2500-3500hd/ https://businessindustrialspline.org/cv-axle-shaft-front-left-right-bolt-on-spline-15-20-silverado-sierra-2500-3500hd/#comments Wed, 05 Aug 2026 19:57:42 +0000 https://businessindustrialspline.org/cv-axle-shaft-front-left-right-bolt-on-spline-15-20-silverado-sierra-2500-3500hd/ Location:Front, Left, Right>. Compressed Length>23.15 in 588 mm. Virgin Islands (VI), Guam (GU), Northern Mariana Islands (MP), (AS), (AK).. We encourage customers placing orders to these areas to. Thank you for your understanding.]]>








Position>Location:Front, Left, Right>. Compressed Length>23.15 in 588 mm. Virgin Islands (VI), Guam (GU), Northern Mariana Islands (MP), (AS), (AK).. We encourage customers placing orders to these areas to. Thank you for your understanding.

]]> https://businessindustrialspline.org/cv-axle-shaft-front-left-right-bolt-on-spline-15-20-silverado-sierra-2500-3500hd/feed/ 0 https://businessindustrialspline.org/5-speed-reverse-9-spline-transmission-bobcat-4127203/ https://businessindustrialspline.org/5-speed-reverse-9-spline-transmission-bobcat-4127203/#comments Tue, 04 Aug 2026 07:54:41 +0000 https://businessindustrialspline.org/5-speed-reverse-9-spline-transmission-bobcat-4127203/






5 Speed with Reverse. Transmission has 9 spline input shafts.

]]> https://businessindustrialspline.org/5-speed-reverse-9-spline-transmission-bobcat-4127203/feed/ 0