https://businessindustrialspline.org Thu, 02 Jul 2026 06:04:43 +0000 en-CA hourly 1 https://wordpress.org/?v=4.1.1 https://businessindustrialspline.org/unbranded-worm-gear-reducer-with-clutchbrake-splined-flange-output-as-shown/ https://businessindustrialspline.org/unbranded-worm-gear-reducer-with-clutchbrake-splined-flange-output-as-shown/#comments Sun, 22 Feb 2026 19:40:48 +0000 https://businessindustrialspline.org/unbranded-worm-gear-reducer-with-clutchbrake-splined-flange-output-as-shown/





















Unbranded/unknown heavy-duty right-angle worm gear speed reducer assembly with an electromagnetic clutch/brake and a splined female output flange, as pictured. This appears to be a training/demo or custom fixture: the original cast gearbox has been sectioned/cut open and welded into a steel frame, exposing the worm and bronze worm wheel. Because the housing is open and missing covers/seals, this assembly is offered strictly for parts, repair, or repurpose. Condition note: From a closing industrial facility. Untested and not powered. The gearbox case is cut open; expect grease, wear, and missing seals/covers. Electromagnetic clutch/brake is included loose (no wiring or controller). See all photos for exactly what is included. Type: Right-angle worm gear speed reducer with bronze worm wheel and steel worm. Output: Splined female flange (see photos for spline details). Input: Shaft couples to an electromagnetic clutch/brake (brand/model not legible). Frame: Custom welded steel frame holding the sectioned gearcase. Orientation: 90° gearset (worm to wheel). Included: the sectioned worm gear reducer assembly and the loose clutch/brake shown-no motor, no guards, no wiring, no fasteners or accessories beyond what is pictured. Notes: Because the housing is open and modified, this unit is not ready for service. Ideal as a parts donor (gears, shafts, bearings, flange, clutch/brake) or for an educational cutaway/display project.

]]> https://businessindustrialspline.org/unbranded-worm-gear-reducer-with-clutchbrake-splined-flange-output-as-shown/feed/ 0 https://businessindustrialspline.org/kone-cranes-gm436mpb-gear-drive-reducer-361-gearbox-hollow-shaft-splined/ https://businessindustrialspline.org/kone-cranes-gm436mpb-gear-drive-reducer-361-gearbox-hollow-shaft-splined/#comments Thu, 13 Nov 2025 03:41:46 +0000 https://businessindustrialspline.org/kone-cranes-gm436mpb-gear-drive-reducer-361-gearbox-hollow-shaft-splined/
















Kone Cranes GM436MPB Gear Drive Reducer 36:1 Gearbox Hollow Shaft Splined. Kone Cranes GM436MPB Gear Drive Reducer 36:1 Gearbox Hollow Shaft Splined Kone Cranes. Frame Size: Motor flange 140mm Square. Input Shaft Diameter: 23 Spline. Output Shaft Diameter: 21 Spline. Output Shaft Orientation (Left, Right, Inline): Parallel Hollow Shaft. In Good Used Condition. X Width 7 in. X Height 6 in. Any item can be picked up at our warehouse in Millersburg free of charge if you would prefer to pick it up yourself or have a courier pick it up. Orders placed before 9 a. Packages weighing less than 150 lbs. If the item needs special preparation, such as crating, reach out to us for a quote. We will not change prices on invoices or mark the package as a gift. If The item is listed as parts or repair, and is not returnable. The 30-day return period starts once you have received the item. After 30 days have passed, the item is no longer returnable. Please reach out to us if you are interested in any item we have available or if you have surplus parts you would like to sell. We are licensed, equipped, and insured to handle warehouse cleanouts, line removals, or demo jobs. Customers are welcome to visit our warehouse during these hours for equipment inspection. Our mission is to empower industries with the tools and solutions they need to thrive in a dynamic and ever-evolving marketplace. With a steadfast commitment to excellence, innovation, and personalized service, we strive to be the premier partner for industrial procurement and supply. We are dedicated to understanding the unique challenges and opportunities that each industry faces. By cultivating deep relationships with our clients, we aim to provide tailored guidance and a comprehensive range of high-quality products. Limitation of Liability: TO THE FULLEST EXTENT PERMITTED BY LAW, IN NO EVENT SHALL ARROW INDUSTRIAL SALES, LLC BE LIABLE FOR ANY SPECIAL, INDIRECT, PUNITIVE, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, WHETHER IN CONTRACT OR TORT, OR UNDER ANY OTHER THEORY OF LIABILITY INCLUDING LOSS OF REVENUE, PROFITS OF BUSINESS, ANY LOSS OF GOODWILL OR REPUTATION, OR THE COSTS OF SUBSTITUTE GOODS OR SERVICES. Termination, Rescission, and Default. LET’S STAY IN TOUCH.

]]> https://businessindustrialspline.org/kone-cranes-gm436mpb-gear-drive-reducer-361-gearbox-hollow-shaft-splined/feed/ 0 https://businessindustrialspline.org/rexroth-0-608-pe1-095-nutrunner-spindle-gearbox-331-reducer-spline-shaft-2-bolt/ https://businessindustrialspline.org/rexroth-0-608-pe1-095-nutrunner-spindle-gearbox-331-reducer-spline-shaft-2-bolt/#comments Thu, 30 Oct 2025 02:12:45 +0000 https://businessindustrialspline.org/rexroth-0-608-pe1-095-nutrunner-spindle-gearbox-331-reducer-spline-shaft-2-bolt/









Rexroth 0 608 PE1 095 Nutrunner Spindle Gearbox 33:1 Reducer Spline Shaft 2-Bolt. 0 608 PE1 095. Rexroth 0 608 PE1 095 Nutrunner Spindle Gearbox 33:1 Reducer Spline Shaft 2-Bolt Rexroth. In Good Used Condition, Removed from a Working Environment. Splined Shaft, 2-bolt flange. X Width 7 in. X Height 7 in. Any item can be picked up at our warehouse in Millersburg free of charge if you would prefer to pick it up yourself or have a courier pick it up. Orders placed before 9 a. Packages weighing less than 150 lbs. If the item needs special preparation, such as crating, reach out to us for a quote. We will not change prices on invoices or mark the package as a gift. If The item is listed as parts or repair, and is not returnable. The 30-day return period starts once you have received the item. After 30 days have passed, the item is no longer returnable. Please reach out to us if you are interested in any item we have available or if you have surplus parts you would like to sell. We are licensed, equipped, and insured to handle warehouse cleanouts, line removals, or demo jobs. Customers are welcome to visit our warehouse during these hours for equipment inspection. Our mission is to empower industries with the tools and solutions they need to thrive in a dynamic and ever-evolving marketplace. With a steadfast commitment to excellence, innovation, and personalized service, we strive to be the premier partner for industrial procurement and supply. We are dedicated to understanding the unique challenges and opportunities that each industry faces. By cultivating deep relationships with our clients, we aim to provide tailored guidance and a comprehensive range of high-quality products. Limitation of Liability: TO THE FULLEST EXTENT PERMITTED BY LAW, IN NO EVENT SHALL ARROW INDUSTRIAL SALES, LLC BE LIABLE FOR ANY SPECIAL, INDIRECT, PUNITIVE, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, WHETHER IN CONTRACT OR TORT, OR UNDER ANY OTHER THEORY OF LIABILITY INCLUDING LOSS OF REVENUE, PROFITS OF BUSINESS, ANY LOSS OF GOODWILL OR REPUTATION, OR THE COSTS OF SUBSTITUTE GOODS OR SERVICES. Termination, Rescission, and Default. LET’S STAY IN TOUCH.

]]> https://businessindustrialspline.org/rexroth-0-608-pe1-095-nutrunner-spindle-gearbox-331-reducer-spline-shaft-2-bolt/feed/ 0 https://businessindustrialspline.org/sd-engineering-01-791-gear-reducer-4-shafts-splined/ https://businessindustrialspline.org/sd-engineering-01-791-gear-reducer-4-shafts-splined/#comments Fri, 04 Apr 2025 20:49:44 +0000 https://businessindustrialspline.org/sd-engineering-01-791-gear-reducer-4-shafts-splined/









SD Engineering 01-791 Gear Reducer, 4-Shafts, Splined. New open box, new without factory packaging. Day Air Available (Inquire for pricing). 30 Day Return Period. We are constantly striving to improve our performance to give you the utmost best experience possible! Listing and template services provided by inkFrog.

]]> https://businessindustrialspline.org/sd-engineering-01-791-gear-reducer-4-shafts-splined/feed/ 0 https://businessindustrialspline.org/perfection-gear-11-ratio-20hp-1750rpm-right-angle-gear-reducer-1-14-6-spline/ https://businessindustrialspline.org/perfection-gear-11-ratio-20hp-1750rpm-right-angle-gear-reducer-1-14-6-spline/#comments Sun, 09 Mar 2025 07:48:46 +0000 https://businessindustrialspline.org/perfection-gear-11-ratio-20hp-1750rpm-right-angle-gear-reducer-1-14-6-spline/









Perfection Gear 1:1 Ratio 20HP 1750RPM Right Angle Gear Reducer 1-1/4 6-Spline. Input Shaft Diameter: 1.000. Vent: Not vented, will need to be vented prior to use. Output Shaft Diameter: 1-1/4 6-spline. Output Torque (lbs): 720. THIS IS A USED GEAR REDUCER. I BELIEVE IT HAS BEEN REBUILT. MOUNTING HOLE PATTERN IS 6X6″ WITH 9/16″ HOLES. CENTERLINE OF SPLINED SHAFT IS 3.500 ABOVE MOUNTING FLANGE. It is a residential address. It is an agricultural address. Your business property also has a residence. You are a business surrounded by residential or agricultural area. You are a stand-alone business or one of only a few businesses miles from other commercial hubs. Our carriers will consider your address limited access if it is a: Cemetery, Church, Country Club, Farm, Golf Club, Hotel, Mall/Shopping Center, Mine, Park, Prison/Correctional Facility, School/College/University, Storage Facility or a utility site. Our carriers will also consider your address limited access if. A semi truck can not easily pull into and turn around. A semi truck must park on the road. A semi truck has to back in off the road. Please call ahead so we have time to pull your items from our Inventory. Thank you for your time and we look forward to serving you.

]]> https://businessindustrialspline.org/perfection-gear-11-ratio-20hp-1750rpm-right-angle-gear-reducer-1-14-6-spline/feed/ 0 https://businessindustrialspline.org/stober-c102n0050mr142050-51-ratio-inline-splined-gear-reducer-1750-rpm-input/ https://businessindustrialspline.org/stober-c102n0050mr142050-51-ratio-inline-splined-gear-reducer-1750-rpm-input/#comments Wed, 11 Dec 2024 09:13:43 +0000 https://businessindustrialspline.org/stober-c102n0050mr142050-51-ratio-inline-splined-gear-reducer-1750-rpm-input/












Stober C102N0050MR142/050 5:1 Ratio Inline Splined Gear Reducer 1750 RPM Input. Output Shaft Has Some Wear Marks. BULLSEYE INDUSTRIAL SALES, LLC. Bullseye Industrial Sales is proud to be a dedicated supplier to the manufacturing industry. We are a leading source for quality new and used equipment. We understand that keeping your equipment running is vital keeping your customers happy and we can provide equipment or replacement parts to get your machine or next project back on schedule. We get hundreds of items in daily, if we don’t have it today check back tomorrow. Next Day & Second Day Air Services are available. We choose the carrier. Will there be a dock or forklift. Please make sure that we have the BOL. Prefer to pick it up yourself? You are welcome to do so, by appointment. We will load it free of charge unless otherwise stated in the listing. After the return period has ended, you can no longer return the product. Unless otherwise specifically agreed to in writing by. All goods are so “AS IS’ and “WITH ALL FAULTS meaning, without limitation, that. Which extend beyond the description of the goods on the face hereof; and.

]]> https://businessindustrialspline.org/stober-c102n0050mr142050-51-ratio-inline-splined-gear-reducer-1750-rpm-input/feed/ 0 https://businessindustrialspline.org/dodge-140cm16a-m94893l1-ux-nsmd-right-angle-gear-reducer-401-ratio-1-5-hp/ https://businessindustrialspline.org/dodge-140cm16a-m94893l1-ux-nsmd-right-angle-gear-reducer-401-ratio-1-5-hp/#comments Tue, 09 Apr 2024 21:50:00 +0000 https://businessindustrialspline.org/dodge-140cm16a-m94893l1-ux-nsmd-right-angle-gear-reducer-401-ratio-1-5-hp/


Condition: New Surplus Mill Duty. Actual Ratio: 40:1. Max HP (1750 RPM Input, 1.0 SF): 1.91. Input Type: C-FACE SPLINED COUPLED SHAFT. Output Type: SOLID SHAFT. Additional Info: NO COUPLING. Buyers must read and agree to the Terms and Conditions. Before purchasing any item. Track Page Views With. Auctiva’s FREE Counter.

]]> https://businessindustrialspline.org/dodge-140cm16a-m94893l1-ux-nsmd-right-angle-gear-reducer-401-ratio-1-5-hp/feed/ 0 https://businessindustrialspline.org/boston-gear-72630j-speed-reducer-spline-shaft-301-ratio-1-5-input-hp/ https://businessindustrialspline.org/boston-gear-72630j-speed-reducer-spline-shaft-301-ratio-1-5-input-hp/#comments Sat, 16 Oct 2021 11:40:52 +0000 http://businessindustrialspline.org/boston-gear-72630j-speed-reducer-spline-shaft-301-ratio-1-5-input-hp/




Boston Gear 72630J Speed Reducer Spline Shaft 30:1 Ratio 1.5 Input HP. If you have additional questions regarding an item, please contact our staff before purchasing. SIGMA Surplus is a division of SIGMA Equipment INC. We stock a wide variety of items ranging from small parts to complete machines. SIGMA Surplus is a Division of SIGMA Equipment INC. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. The item “Boston Gear 72630J Speed Reducer Spline Shaft 301 Ratio 1.5 Input HP” is in sale since Tuesday, January 19, 2021. This item is in the category “Business & Industrial\Industrial Automation & Motion Controls\Mechanical Power Transmission\Gearboxes & Speed Reducers”. The seller is “sigmasurplus” and is located in Evansville, Indiana. This item can be shipped worldwide.

• Model: 72630J
• Brand: Boston Gear
• MPN: 72630J

]]> https://businessindustrialspline.org/boston-gear-72630j-speed-reducer-spline-shaft-301-ratio-1-5-input-hp/feed/ 0 https://businessindustrialspline.org/boston-gear-73250j-gear-reducer-spline-shaft-501-ratio-1-73-input-hp/ https://businessindustrialspline.org/boston-gear-73250j-gear-reducer-spline-shaft-501-ratio-1-73-input-hp/#comments Tue, 26 Jan 2021 12:38:04 +0000 http://businessindustrialspline.org/boston-gear-73250j-gear-reducer-spline-shaft-501-ratio-1-73-input-hp/



Boston Gear 73250J Gear Reducer Spline Shaft 50:1 Ratio 1.73 Input HP. If you have additional questions regarding an item, please contact our staff before purchasing. SIGMA Surplus is a division of SIGMA Equipment INC. We stock a wide variety of items ranging from small parts to complete machines. SIGMA Surplus is a Division of SIGMA Equipment INC. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. Powered by SixBit’s eCommerce Solution. The item “Boston Gear 73250J Gear Reducer Spline Shaft 501 Ratio 1.73 Input HP” is in sale since Tuesday, January 19, 2021. This item is in the category “Business & Industrial\Industrial Automation & Motion Controls\Mechanical Power Transmission\Gearboxes & Speed Reducers”. The seller is “sigmasurplus” and is located in Evansville, Indiana. This item can be shipped worldwide.

• Brand: Boston Gear
• MPN: 73250J
• Nominal Ratio: 50:1
• Shaft Orientation: Right Angle
• Model: 73250J
• Country/Region of Manufacture: United States
• Bundle Listing: No
• Non-Domestic Product: N/A
• Applicable Regions: N/A
• Unit Quantity: 1
• Unit Type: N/A

]]> https://businessindustrialspline.org/boston-gear-73250j-gear-reducer-spline-shaft-501-ratio-1-73-input-hp/feed/ 0 https://businessindustrialspline.org/massey-ferguson-690-front-axle-reducer-shaft-206-splines-3224999m1/ https://businessindustrialspline.org/massey-ferguson-690-front-axle-reducer-shaft-206-splines-3224999m1/#comments Sun, 30 Aug 2020 08:42:55 +0000 http://businessindustrialspline.org/massey-ferguson-690-front-axle-reducer-shaft-206-splines-3224999m1/




Massey Ferguson 690 Front Axle Reducer Shaft 20/6 Splines 3224999M1. Front Axle Reducer Shaft 20/6 Splines Part Number: 3224999M1 To fit Masey Ferguson 690 and another. Please check by photos. All parts can be delivered. All Ireland , Europe and Worldwide. Case IH & Internationa. L : B250, B275, 343,354, 434, 444, 534,633 SA, 634, 584, 684, 784, 585, 885XL, 895. 955, 956XL, 1055, 1056, 1255, 4210, 5130, CX90, CX100, MXM190. David Brown & CASE. 850,780,880 Red, 880 White , 885,990 Red, 990 White, 995,996,1190,1194,1290. 1294,1390,1394, 1394 High Clear, 1490, 1494, 1594, 1690, 1694. D4006, D6806, DX85, DX90, DX6.50, Agrotron120, DX3.90, DX4.70, DX110. Ford Pre Force and Force. 2000,3000,4000, and 5000,2600,3600,4600,5600,6600,7600. 3610,3910,4110,4610,5610,6610,6700,6710.7610,8210. TW10, TW20, TW15 TW25,4630. 5635,6640 Non Dual Power & SLE, 7740,7840SLE, 7840 Dual Power, 8160,8240 SLE, 8340 SLE, 8630 Powershift. TE20 Diesel & Petrol. 680,780,880,980,70-90,80-90,90-90,100-90,110-90. 1120,2030,2130,2140,2840,2650,2850,3130,3040,5820,6200,6300,6400,6910.7710. 245,260,262,270,272. 35,65,135,148,165, 255, 260, 298,390, 590, 595, 699,690,698,3070,3080,3085,3125,3650,5455. T7040, T6050, 5635,4630, 8260, 8360 Dual Command, TM150 Super Steer, TM 125, TM120, TM130, TM140, TS110, TS115. 4/60, 10/60, Universal Four, Universal Three. Leopard, Panther, Buffalo, Explorer, Rubin 120, Rubin 150. 355, C-385, 3512, 911. 3511,3611,4718,5718,5911,8011,8111. Diggers and Plant Machinery. 3CX pre 1987,814,408, TM200. 205,30,40,50,50B, 50D, 50HX, 50HXS. 407,410,412, TM200,408. The item “Massey Ferguson 690 Front Axle Reducer Shaft 20/6 Splines 3224999M1″ is in sale since Thursday, April 19, 2018. This item is in the category “Business, Office & Industrial\Agriculture/Farming\Tractors”. The seller is “cms-tractor-parts” and is located in BANDON. This item can be shipped to United States, European Union member countries.

• Brand: MASSEY FERGUSON
• Manufacturer Part Number: 3224999M1

]]> https://businessindustrialspline.org/massey-ferguson-690-front-axle-reducer-shaft-206-splines-3224999m1/feed/ 0