https://businessindustrialspline.org Thu, 16 Apr 2026 11:52:47 +0000 en-CA hourly 1 https://wordpress.org/?v=4.1.1 https://businessindustrialspline.org/gearbox-401-0007-ratio-1147-1-38-smooth-12-shear-pin-input-12-spline/ https://businessindustrialspline.org/gearbox-401-0007-ratio-1147-1-38-smooth-12-shear-pin-input-12-spline/#comments Mon, 08 Dec 2025 16:42:43 +0000 https://businessindustrialspline.org/gearbox-401-0007-ratio-1147-1-38-smooth-12-shear-pin-input-12-spline/













1:1.47 SU(speed up) ratio drop-in replacement gearbox. Please Look at all pictures. One (1) Brand New Gearbox 1:1.47 SU (speed up) ratio for rotary cutter. 1-3/8″ diameter smooth input shaft with ½” shear bolt hole. The output shaft has 12 tapered splines 1.57 diameter. 4 bolt mounting pattern is 6-3/4″ diagonally center to center hole or 4-3/4″ or more precisely 4.773 from center to the center of adjacent holes. Note: Your Actual Gearbox may have a round housing or square housing, but this drop-in replacement gearbox should still fit if all the other measurements are the same. Rated 40 HP at 540 RPM. Input shaft smooth 1-3/8″ diameter with ½” shear bolt hole. 1: 1.47 ratio SU (speed up). Output shaft 12 tapered splines. 1.57 inches (39.878 mm) diameter. 4 Bolt mounting pattern is 6-3/4 diagonally center to the center hole. 4-3/4″ or more precisely 4.773″ from center to the center of adjacent holes. Standard rotation (clockwise in/ counterclockwise out). Includes castle nut, cotter pin, and breather vent. Includes input shaft retaining ring. This gearbox may fit the following part number. BMB – 1080, 10300. RHINO – 0711050100, 71105. OMNI – 250123, 250001. SE BIG OX – 1970. Please message or call if additional information is needed before purchasing. Your complete satisfaction is important to us. All parts are guaranteed to meet with your approval! The use of their part numbers and or drawings are only used to aid AgriQualityPartsSupply customers in finding the correct replacement part.

]]> https://businessindustrialspline.org/gearbox-401-0007-ratio-1147-1-38-smooth-12-shear-pin-input-12-spline/feed/ 0 https://businessindustrialspline.org/perfection-gear-11-ratio-20hp-1750rpm-right-angle-gear-reducer-1-14-6-spline/ https://businessindustrialspline.org/perfection-gear-11-ratio-20hp-1750rpm-right-angle-gear-reducer-1-14-6-spline/#comments Sun, 09 Mar 2025 07:48:46 +0000 https://businessindustrialspline.org/perfection-gear-11-ratio-20hp-1750rpm-right-angle-gear-reducer-1-14-6-spline/









Perfection Gear 1:1 Ratio 20HP 1750RPM Right Angle Gear Reducer 1-1/4 6-Spline. Input Shaft Diameter: 1.000. Vent: Not vented, will need to be vented prior to use. Output Shaft Diameter: 1-1/4 6-spline. Output Torque (lbs): 720. THIS IS A USED GEAR REDUCER. I BELIEVE IT HAS BEEN REBUILT. MOUNTING HOLE PATTERN IS 6X6″ WITH 9/16″ HOLES. CENTERLINE OF SPLINED SHAFT IS 3.500 ABOVE MOUNTING FLANGE. It is a residential address. It is an agricultural address. Your business property also has a residence. You are a business surrounded by residential or agricultural area. You are a stand-alone business or one of only a few businesses miles from other commercial hubs. Our carriers will consider your address limited access if it is a: Cemetery, Church, Country Club, Farm, Golf Club, Hotel, Mall/Shopping Center, Mine, Park, Prison/Correctional Facility, School/College/University, Storage Facility or a utility site. Our carriers will also consider your address limited access if. A semi truck can not easily pull into and turn around. A semi truck must park on the road. A semi truck has to back in off the road. Please call ahead so we have time to pull your items from our Inventory. Thank you for your time and we look forward to serving you.

]]> https://businessindustrialspline.org/perfection-gear-11-ratio-20hp-1750rpm-right-angle-gear-reducer-1-14-6-spline/feed/ 0 https://businessindustrialspline.org/replacement-6-spline-input-12-spline-output-gearbox-with-11-93-speed-up-ratio/ https://businessindustrialspline.org/replacement-6-spline-input-12-spline-output-gearbox-with-11-93-speed-up-ratio/#comments Sun, 09 Feb 2025 19:50:48 +0000 https://businessindustrialspline.org/replacement-6-spline-input-12-spline-output-gearbox-with-11-93-speed-up-ratio/


Replacement Rotary Cutter gearbox, 40hp rated, 1-3/8″ – 6 spline input shaft, 1.57″ X 12 tapered spline output shaft and 1:1.93 speed up ratio for Fred Cain cutters, 4′ Cut and 8′ Cut WAC mowers, will fit Wolverine Skid Steer Mowers and several more.. Fits Fred Cain Agri Series AC-204 and AC-205 and early 8′ cut rotary cutters. These gearboxes can have a square housing. These gearboxes have been used by WAC, HawkLine, Behlen, International Machinery, Tarter Gate, Midwest Mfg, Servis Rhino, Frontier, Land Pride, Taylor Pittsburg and many more. This is the high speed version of this gearbox it will turn about 25% faster than the 1:1.47 ratio gearboxes which will increase blade tip speed and provide a cleaner cut when cutting pasture land. If your gearbox has a 12 spline output shaft and a 1-3/8 – 6 spline input shaft this gearbox will work. Bolt pattern is 4-3/4″ on center hole to hole and 6-3/4″ center to center of bolt hole on diagonal. The mounting holes form a square bolt pattern. We sell many replacement parts for the Fred Cain rotary cutters. We are listing new items frequently so please check our store often. We are located at. Brooks Ag Parts LLC. 1726 State Route 125. Your complete satisfaction is important to us, should you have any problems please let us know so we can correct them. If you have any question about the part you need, please call first we will be glad to answer your questions. All parts are guaranteed to meet with your approval! The use of their part numbers and or drawings are only used to aide Brooks AG Parts customers in finding the correct Brooks AG Parts replacement part.

]]> https://businessindustrialspline.org/replacement-6-spline-input-12-spline-output-gearbox-with-11-93-speed-up-ratio/feed/ 0 https://businessindustrialspline.org/rc-51h-251390-hydraulic-brush-cutter-gearbox-1-93-ratio-with-hydraulic-motor-mount/ https://businessindustrialspline.org/rc-51h-251390-hydraulic-brush-cutter-gearbox-1-93-ratio-with-hydraulic-motor-mount/#comments Sat, 01 Feb 2025 07:25:28 +0000 https://businessindustrialspline.org/rc-51h-251390-hydraulic-brush-cutter-gearbox-1-93-ratio-with-hydraulic-motor-mount/
















RC-51H This gearbox features a Hydraulic Motor Mount with a 1:1.93 Speed Up gear ratio and a internal 1-1/4″ 14 Spline for hydraulic motor, with a 2″ 15 tapered spline output shaft for use on many Skid Steer rotary cutters. Each gearbox features high speed bearing units and heat treated gears and shafts to ensure long life. Has a Four bolt mounting matches industry standards, 4-3/4 on centers. Each gearbox includes blade carrier mounting nut and cotter pin. Package Includes: 1Hydraulic Brush Cutter Gearbox. RC-51H 251390 Hydraulic Brush Cutter Gearbox 1.93 Ratio W/ Hydraulic Motor Mount. Hydraulic Brush Cutter Gearbox RC-51H 1.93 ratio GEAR 251390. Gear RC51H 90-degree Gearbox. 1.93 ratio, 1-1/4 14 tooth splined input shaft with blade hub. Compatible with Gearbox 1:1.93 Ratio With Hydraulic Motor Mount. 1Hydraulic Brush Cutter Gearbox. We want to provide good quality products to all our customers. WE committed to establish in-depth cooperation with powerful manufacturers, to make sure High standard quality control is applied to every single item. We aims to manufacture premium parts, which provides stable performance and durability. Please make sure you have read through the whole listing and paid attention to “note” and “notice”. If there is any uncertain, please send the VIN and we will verify it for you. ? Most parts do not come with instructions and professional installation is highly recommended for such parts. Of course, our technicians will also do their best to solve the problem for you and give you a worry-free after-sales experience. This means we can quickly answer your questions and concerns. ? Our working time (Beijing time): 9:00AM6:00PM. And will always provide a more suitable solution.

]]> https://businessindustrialspline.org/rc-51h-251390-hydraulic-brush-cutter-gearbox-1-93-ratio-with-hydraulic-motor-mount/feed/ 0 https://businessindustrialspline.org/stober-c102n0050mr142050-51-ratio-inline-splined-gear-reducer-1750-rpm-input/ https://businessindustrialspline.org/stober-c102n0050mr142050-51-ratio-inline-splined-gear-reducer-1750-rpm-input/#comments Wed, 11 Dec 2024 09:13:43 +0000 https://businessindustrialspline.org/stober-c102n0050mr142050-51-ratio-inline-splined-gear-reducer-1750-rpm-input/












Stober C102N0050MR142/050 5:1 Ratio Inline Splined Gear Reducer 1750 RPM Input. Output Shaft Has Some Wear Marks. BULLSEYE INDUSTRIAL SALES, LLC. Bullseye Industrial Sales is proud to be a dedicated supplier to the manufacturing industry. We are a leading source for quality new and used equipment. We understand that keeping your equipment running is vital keeping your customers happy and we can provide equipment or replacement parts to get your machine or next project back on schedule. We get hundreds of items in daily, if we don’t have it today check back tomorrow. Next Day & Second Day Air Services are available. We choose the carrier. Will there be a dock or forklift. Please make sure that we have the BOL. Prefer to pick it up yourself? You are welcome to do so, by appointment. We will load it free of charge unless otherwise stated in the listing. After the return period has ended, you can no longer return the product. Unless otherwise specifically agreed to in writing by. All goods are so “AS IS’ and “WITH ALL FAULTS meaning, without limitation, that. Which extend beyond the description of the goods on the face hereof; and.

]]> https://businessindustrialspline.org/stober-c102n0050mr142050-51-ratio-inline-splined-gear-reducer-1750-rpm-input/feed/ 0 https://businessindustrialspline.org/dodge-140cm16a-m94893l1-ux-nsmd-right-angle-gear-reducer-401-ratio-1-5-hp/ https://businessindustrialspline.org/dodge-140cm16a-m94893l1-ux-nsmd-right-angle-gear-reducer-401-ratio-1-5-hp/#comments Tue, 09 Apr 2024 21:50:00 +0000 https://businessindustrialspline.org/dodge-140cm16a-m94893l1-ux-nsmd-right-angle-gear-reducer-401-ratio-1-5-hp/


Condition: New Surplus Mill Duty. Actual Ratio: 40:1. Max HP (1750 RPM Input, 1.0 SF): 1.91. Input Type: C-FACE SPLINED COUPLED SHAFT. Output Type: SOLID SHAFT. Additional Info: NO COUPLING. Buyers must read and agree to the Terms and Conditions. Before purchasing any item. Track Page Views With. Auctiva’s FREE Counter.

]]> https://businessindustrialspline.org/dodge-140cm16a-m94893l1-ux-nsmd-right-angle-gear-reducer-401-ratio-1-5-hp/feed/ 0 https://businessindustrialspline.org/gearbox-rj-link-ratio-41-involute-spline-shaft-20-teeth-to-2-2-keyed-shaft/ https://businessindustrialspline.org/gearbox-rj-link-ratio-41-involute-spline-shaft-20-teeth-to-2-2-keyed-shaft/#comments Wed, 02 Aug 2023 18:01:25 +0000 https://businessindustrialspline.org/gearbox-rj-link-ratio-41-involute-spline-shaft-20-teeth-to-2-2-keyed-shaft/











RJ LINK GEARBOX RATIO 4/1 INVOLUTE SPLINE SHAFT : 20 TEETH TO 2.2 KEYED SHAFT.

]]> https://businessindustrialspline.org/gearbox-rj-link-ratio-41-involute-spline-shaft-20-teeth-to-2-2-keyed-shaft/feed/ 0 https://businessindustrialspline.org/landpride-826-670c-replacement-gearbox-11-93-ratio-with-12-splines-output-shaft/ https://businessindustrialspline.org/landpride-826-670c-replacement-gearbox-11-93-ratio-with-12-splines-output-shaft/#comments Sat, 10 Jun 2023 09:51:51 +0000 https://businessindustrialspline.org/landpride-826-670c-replacement-gearbox-11-93-ratio-with-12-splines-output-shaft/













1:1.93 su(speed up) ratio drop-in replacement gearbox. Please Look at all pictures. One (1) Brand New Gearboxes replacing Land Pride 826-670C drop-in replacement 1:1.93 Ratio with 12 spline output shafts. Input shaft smooth 1 3/8″ diameter with ½” shear bolt hole. 1: 1.93 ratio SU (speed up). Output shaft 12 tapered splines. 1.57 inches (39.878 mm) diameter. 4 Bolt mounting pattern is 6-3/4 diagonally center to the center hole. 4-3/4″ or more precisely 4.773″ from center to the center hole adjacent. Standard rotation (clockwise in/ counterclockwise out). Includes castle nut and cotter pin and breather vent. Includes input shaft retaining ring. This gearbox may fit the following part number. Land Pride Part Number: 826-670C. May fit on RCR1248. Please message or call if additional information is needed before purchasing. Your complete satisfaction is important to us. All parts are guaranteed to meet with your approval! The use of their part numbers and or drawings are only used to aid AgriQualityPartsSupply customers in finding the correct replacement part.

]]> https://businessindustrialspline.org/landpride-826-670c-replacement-gearbox-11-93-ratio-with-12-splines-output-shaft/feed/ 0 https://businessindustrialspline.org/rc-30-40hp-gearbox-1-38-6-spline-11-47-ratio-12-spline-flywheel-12-splined/ https://businessindustrialspline.org/rc-30-40hp-gearbox-1-38-6-spline-11-47-ratio-12-spline-flywheel-12-splined/#comments Mon, 05 Jun 2023 22:12:12 +0000 https://businessindustrialspline.org/rc-30-40hp-gearbox-1-38-6-spline-11-47-ratio-12-spline-flywheel-12-splined/



Motorcycle Chains & Sprockets. Car Racks and Tire Chains. Frequently Bought Together Kit. Add to Favorite Sellers. Sign up to Newsletter. RC-30 40HP Gearbox 1-3/8, 6 Spline 1:1.47 Ratio 12 Spline & Flywheel 12 Splined. Gear Ratio: 1:1.47 speed up gear ratio for use on 5′ and larger diameter rotary cutters. Input and Output Shaft Diameter: 1-3/8 – 6 spline input shaft with 12 tapered spline output shaft. The gearbox requires 16 ounces of 80-90W gear lube or equivalent. Mounting: Four-bolt mounting matches industry standards, each gearbox includes a blade carrier mounting nut and cotter pin. Includes replacement stump jumper / flywheel 12 splined hub. Count on us at Jeremywell to provide high-quality agricultural replacement parts that you can rely on. Our new gearbox is a powerful replacement option for Bush Hog, Comer, and other light duty rotary cutter machines. An industry standard- 1-3/8″ – 6 Spline diameter input shaft with 1/2″ shear bolt hole and retaining ring groove and 1.47 diameter 12 tapered spline output shaft, making it the perfect fit for most light, standard, and medium-duty rotary cutters. Includes Replacement Stump Jumper / Flywheel 12 Splined Hub. With up to 40HP, an input RPM of 540, output RPM of 794 and a max torque of 446 Nm this gearbox offers flexibility, efficiency, and accuracy with every cut. 1:1.47 speed up gear ratio allows you to use it on rotary cutters over 5 feet in diameter while maintaining accuracy. High-speed ball-bearing units and heat-treated gears and shafts to ensure longevity, along with a blade carrier mounting nut and cotter pin. It’s a perfect replacement option for an old or broken rotary cutter gearbox and comes at an affordable price. This gearbox is compatible with a variety of rotary cutter machines, please see our fitment list below. Gear Ratio: 1:1.47. Input Shaft Diameter: 1-3/8 – 6 spline. With 1/2 shear bolt hole. Output Shaft Diameter: 1.47 – 12 tapered spline. Flywheel 12 Splined Hub: Included. Max Torque: 446 Nm. Replaces the following brands/part numbers. Comer : U920580000, U9.135.800.10, U9.205.800.00, U913580010, 9.119.000.20, 9.135.000.20, 911900020, 913500020, 101. Fits Brands & Models. Bush Hog Rotary Cutter : RZ160, RZ60, 81444. Hico/Howse: 500C (2003 & Above). Land Pride Rotary Cutter: RCR1672 (S/N 377687 & Above), RCR1872. Kodiak Rotary Cutter: ST60, ST72. RD5, RD6, RZ160, RZ60 – Gearbox Assembly P/N 00786192. Razorback Series BH4, BH5, BH6, BH4-2, BH5-2, BH6-2. Howse 500 & 5′ M Series King Kutter Modern 6′ Competitor & Sunshine Mohawk Brave 4, 5 & 6 Sidewinder GM 60 & 72, EZCut 60, LX 60 & 60R. BMB B-42, B-4, B-5, B-400 (late models) SPECIAL 5, SPECIAL 6, UTILITY (late models). HARDEE C-52-LT, C-60-LT, SOME ECONOMY SERIES, SOME PANTHER SERIES, Many HOWSE mowers, RHINO SE-5 (some models) SE-6 (some models), EC60, EC72, SOUTHEAST IMCO BIGOX, RC40, RC48, RC60, TC4, TC5, TRAILBLAZER. We also carry the same Gear Box with 1 3/8” Smooth Input Shaft Note: Actual Gearbox may have a rounded housing or square as shown. All internal parts are interchangeable and the specifications for both boxes are identical! View more great items. #CA550 Agricultural Roller Chain 10 FT, RCC50-0014, CLCA550, 042-CA550CL. H228383 Clean Grain Elevator Sprocket Low For John Deere Combine. A- 87664057, 86610110 Sprocket, LH Rotor Drive, Double for Case-IH, New Holland. 87283438, 86998052 Clean Grain Head Sprocket Fit Case-IH Combine Models. Is a leading firm in power transmission and mechanical products. We provide a variety of standard and special industrial chains, such as: Driving Chains, Conveyor Chains, Agricultural Chains, Leaf Chain, Stainless Steel Chains, Metallurgical Chains and many more! In addition, we also carry Power Transmission Parts, Agriculture & Garden Parts, Automotive Parts, and Tools, such as Pillow Block Bearings, Sprockets, Shaft Collars, Spindle Assemblies, Belts, Pulleys, Chainsaw Chains, Trailer Jacks, Go Kart Clutch, Drill Bit and many more! We keep all of our inventories in Orange County, CA to meet the needs of our customers. We provide quality products at fair prices, while striving to help our customers to become the leaders in their respective industries. We always adhere to the enterprise spirit of being practical, innovative, efficient, and excellent to satisfy all our customer’s needs. If you have any questions or would like further information regarding our products, please don’t hesitate to get in touch! The best way is to return you product and place an order for the correct part. This listing is currently undergoing maintenance, we apologise for any inconvenience caused.

]]> https://businessindustrialspline.org/rc-30-40hp-gearbox-1-38-6-spline-11-47-ratio-12-spline-flywheel-12-splined/feed/ 0 https://businessindustrialspline.org/rc-30-40hp-rotary-cutter-gearbox-1-38-6-spline-11-47-ratio-12-spline-output-2/ https://businessindustrialspline.org/rc-30-40hp-rotary-cutter-gearbox-1-38-6-spline-11-47-ratio-12-spline-output-2/#comments Mon, 27 Feb 2023 23:56:19 +0000 https://businessindustrialspline.org/rc-30-40hp-rotary-cutter-gearbox-1-38-6-spline-11-47-ratio-12-spline-output-2/


Motorcycle Chains & Sprockets. Car Racks and Tire Chains. Frequently Bought Together Kit. Add to Favorite Sellers. Sign up to Newsletter. RC-30 40HP Rotary Cutter Gearbox 1-3/8, 6 Spline 1:1.47 Ratio 12 Spline Output. Gear Ratio: 1:1.47 speed up gear ratio for use on 5′ and larger diameter rotary cutters. Input and Output Shaft Diameter: 1-3/8 – 6 spline input shaft with 12 tapered spline output shaft. The gearbox requires 16 ounces of 80-90W gear lube or equivalent. Mounting: Four-bolt mounting matches industry standards, each gearbox includes a blade carrier mounting nut and cotter pin. Count on us at Jeremywell to provide high-quality agricultural replacement parts that you can rely on. Our new gearbox is a powerful replacement option for Bush Hog, Comer, and other light duty rotary cutter machines. An industry standard- 1-3/8″ – 6 spline diameter input shaft with 1/2″ shear bolt hole and retaining ring groove and 1.47 diameter 12 tapered spline output shaft, making it the perfect fit for most light, standard, and medium-duty rotary cutters. With up to 40HP, an input RPM of 540, output RPM of 794 and a max torque of 446 Nm this gearbox offers flexibility, efficiency, and accuracy with every cut. The 1:1.47 speed up gear ratio allows you to use it on rotary cutters over 5 feet in diameter while maintaining accuracy. High-speed ball-bearing units and heat-treated gears and shafts to ensure longevity, along with a blade carrier mounting nut and cotter pin. It’s a perfect replacement option for an old or broken rotary cutter gearbox and comes at an affordable price. This gearbox is compatible with a variety of rotary cutter machines, please see our fitment list below. Gear Ratio: 1:1.47. Input Shaft Diameter: 1-3/8 – 6 spline. With 1/2 shear bolt hole. Output Shaft Diameter: 1.47 – 12 tapered spline. Flywheel 12 Splined Hub: Not Included. Max Torque: 446 Nm. Replaces the following brands/part numbers. Comer : U920580000, U9.135.800.10, U9.205.800.00, U913580010, 9.119.000.20, 9.135.000.20, 911900020, 913500020, 101. Fits Brands & Models. Bush Hog Rotary Cutter : RZ160, RZ60, 81444. Hico/Howse: 500C (2003 & Above). Land Pride Rotary Cutter: RCR1672 (S/N 377687 & Above), RCR1872. Kodiak Rotary Cutter: ST60, ST72. RD5, RD6, RZ160, RZ60 – Gearbox Assembly P/N 00786192. Razorback Series BH4, BH5, BH6, BH4-2, BH5-2, BH6-2. Howse 500 & 5′ M Series King Kutter Modern 6′ Competitor & Sunshine Mohawk Brave 4, 5 & 6 Sidewinder GM 60 & 72, EZCut 60, LX 60 & 60R. BMB B-42, B-4, B-5, B-400 (late models) SPECIAL 5, SPECIAL 6, UTILITY (late models). HARDEE C-52-LT, C-60-LT, SOME ECONOMY SERIES, SOME PANTHER SERIES, Many HOWSE mowers, RHINO SE-5 (some models) SE-6 (some models), EC60, EC72, SOUTHEAST IMCO BIGOX, RC40, RC48, RC60, TC4, TC5, TRAILBLAZER. We also carry the same Gear Box with 1 3/8” Smooth Input Shaft Note: Actual Gearbox may have a rounded housing or square as shown. All internal parts are interchangeable and the specifications for both boxes are identical! View more great items. PTO Shaft 147029,147034 Replace 5? King Kutter 3-Point Mounted Mower. Rotary-Tiller PTO Shaft with Friction Clutch replacement King Kutter 147122. RC30 40HP 81444 Shear Pin Gearbox for RZ160 RZ60 12Z 1-3/8? Smooth 1:1.47 Ratio. PTO Shaft 147022 Replacement/Fits 4? King Kutter Finish Mower. Is a leading firm in power transmission and mechanical products. We provide a variety of standard and special industrial chains, such as: Driving Chains, Conveyor Chains, Agricultural Chains, Leaf Chain, Stainless Steel Chains, Metallurgical Chains and many more! In addition, we also carry Power Transmission Parts, Agriculture & Garden Parts, Automotive Parts, and Tools, such as Pillow Block Bearings, Sprockets, Shaft Collars, Spindle Assemblies, Belts, Pulleys, Chainsaw Chains, Trailer Jacks, Go Kart Clutch, Drill Bit and many more! We keep all of our inventories in Orange County, CA to meet the needs of our customers. We provide quality products at fair prices, while striving to help our customers to become the leaders in their respective industries. We always adhere to the enterprise spirit of being practical, innovative, efficient, and excellent to satisfy all our customer’s needs. If you have any questions or would like further information regarding our products, please don’t hesitate to get in touch! The best way is to return you product and place an order for the correct part. This listing is currently undergoing maintenance, we apologise for any inconvenience caused. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment Attachments\Mowers, Mower Decks & Mower Conditioners”. The seller is “jeremywellindustry” and is located in this country: US. This item can be shipped to United States, Canada.

• Brand: Jeremywell
• MPN: RC30-6S
• UPC: 843718106530

]]> https://businessindustrialspline.org/rc-30-40hp-rotary-cutter-gearbox-1-38-6-spline-11-47-ratio-12-spline-output-2/feed/ 0