https://businessindustrialspline.org Wed, 12 Aug 2026 08:11:43 +0000 en-CA hourly 1 https://wordpress.org/?v=4.1.1 https://businessindustrialspline.org/two-section-hydraulic-gear-pump-pgp51088g3lp-for-agt-skid-steer-loader-ktt23-new-3/ https://businessindustrialspline.org/two-section-hydraulic-gear-pump-pgp51088g3lp-for-agt-skid-steer-loader-ktt23-new-3/#comments Fri, 07 Aug 2026 08:01:46 +0000 https://businessindustrialspline.org/two-section-hydraulic-gear-pump-pgp51088g3lp-for-agt-skid-steer-loader-ktt23-new-3/

















Two-Section Hydraulic Gear Pump PGP51088G3LP For AGT Skid Steer Loader KTT23 New. Dual-Chamber Design: Independent circuits for main drive and auxiliary hydraulics. Dual Suction & Dual Feed: Ensures consistent flow and pressure for both systems. High-Strength Cast Housing: Durable construction built for high-duty applications. Simultaneous Operation: Run drive and attachment hydraulics together with no power loss. Precise Flow Control: Optimized for smooth and efficient hydraulic performance. Pump Type: Dual-chamber hydraulic gear pump. Mounting: 5/8 9-spline A2 mount. Main Inlet Port: Dedicated to drive system. Auxiliary Inlet Port: Dedicated to hydraulic attachments. Flow Capacity: Approximately 6-12 GPM. Operating Pressure: Up to 3,000 PSI (21 MPa). Material: High-strength cast housing. OEM / OE Part Number: PGP51088G3LP. Compatible With: Skid Steer Loader KTT23 and similar models. Use Case: Direct replacement for worn or damaged original pumps. 1 × Hydraulic Pump (as pictured). 100% Functional & Tested. Original Standard Design. High-Quality Materials for Maximum Durability. Engineered for Long Service Life in Demanding Conditions.

]]> https://businessindustrialspline.org/two-section-hydraulic-gear-pump-pgp51088g3lp-for-agt-skid-steer-loader-ktt23-new-3/feed/ 0 https://businessindustrialspline.org/oem-3-section-hydraulic-gear-pump-triple-stage-tandem-pump-splined-shaft-heavy-e/ https://businessindustrialspline.org/oem-3-section-hydraulic-gear-pump-triple-stage-tandem-pump-splined-shaft-heavy-e/#comments Sun, 02 Aug 2026 19:50:43 +0000 https://businessindustrialspline.org/oem-3-section-hydraulic-gear-pump-triple-stage-tandem-pump-splined-shaft-heavy-e/







New surplus OEM 3-section hydraulic gear pump. Triple section gear pump. Ports capped from factory. New unused surplus condition. Please verify fitment using the stamped numbers and photos before purchasing.

]]> https://businessindustrialspline.org/oem-3-section-hydraulic-gear-pump-triple-stage-tandem-pump-splined-shaft-heavy-e/feed/ 0 https://businessindustrialspline.org/wabco-hydraulic-pump-assembly-with-splined-shaft-mpn-911-153-021-0/ https://businessindustrialspline.org/wabco-hydraulic-pump-assembly-with-splined-shaft-mpn-911-153-021-0/#comments Thu, 16 Jul 2026 19:03:05 +0000 https://businessindustrialspline.org/wabco-hydraulic-pump-assembly-with-splined-shaft-mpn-911-153-021-0/









It’s a used part that was replaced by mistake the governor was the problem IThe WABCO Hydraulic Pump Assembly with a Splined Shaft is a high-quality pump designed for hydraulic systems. With its reliable brand reputation and specific MPN number, 911 153 027 0, this pump ensures efficient and precise pumping of hydraulic fluid. Ideal for various industrial and business applications, this WABCO pump assembly is a durable and dependable component for ensuring smooth hydraulic operation.

]]> https://businessindustrialspline.org/wabco-hydraulic-pump-assembly-with-splined-shaft-mpn-911-153-021-0/feed/ 0 https://businessindustrialspline.org/alamo-02962767-front-pump-drive-shaft-78-dia-13-spline-both-ends-20-oal/ https://businessindustrialspline.org/alamo-02962767-front-pump-drive-shaft-78-dia-13-spline-both-ends-20-oal/#comments Sun, 14 Jun 2026 17:20:42 +0000 https://businessindustrialspline.org/alamo-02962767-front-pump-drive-shaft-78-dia-13-spline-both-ends-20-oal/




Alamo 02962767 Front Pump Drive Shaft 7/8″ Diameter 13 Spline Both Ends 20″ OAL.

]]> https://businessindustrialspline.org/alamo-02962767-front-pump-drive-shaft-78-dia-13-spline-both-ends-20-oal/feed/ 0 https://businessindustrialspline.org/eaton-26003-rzk-hydraulic-gear-pump-splined-shaft-2-bolt-flange-nos-oem/ https://businessindustrialspline.org/eaton-26003-rzk-hydraulic-gear-pump-splined-shaft-2-bolt-flange-nos-oem/#comments Wed, 10 Jun 2026 05:11:49 +0000 https://businessindustrialspline.org/eaton-26003-rzk-hydraulic-gear-pump-splined-shaft-2-bolt-flange-nos-oem/





Eaton 26003-RZK Hydraulic Gear Pump Splined Shaft 2-Bolt Flange NOS OEM. EATON 26003-RZK Hidráulic Gear Pump. 1.0625-12 UN-2B SAE O-Ring. 2-Bolt SAE A Flange. 875-14 UNF-2B SAE O-Ring.

]]> https://businessindustrialspline.org/eaton-26003-rzk-hydraulic-gear-pump-splined-shaft-2-bolt-flange-nos-oem/feed/ 0 https://businessindustrialspline.org/qcc-11012966-hydraulic-gear-pump-78-x-13-spline-shaft-53-29058-014-steering/ https://businessindustrialspline.org/qcc-11012966-hydraulic-gear-pump-78-x-13-spline-shaft-53-29058-014-steering/#comments Fri, 15 May 2026 15:24:04 +0000 https://businessindustrialspline.org/qcc-11012966-hydraulic-gear-pump-78-x-13-spline-shaft-53-29058-014-steering/

















New Old Stock Surplus. Original Package is Missing. Unit has been Repackaged. Mount Hub OD: 4. Mount Hole Spread C-C: 5-3/4″ 1/2″ ID Hole.

]]> https://businessindustrialspline.org/qcc-11012966-hydraulic-gear-pump-78-x-13-spline-shaft-53-29058-014-steering/feed/ 0 https://businessindustrialspline.org/two-section-hydraulic-gear-pump-pgp51088g3lp-for-agt-skid-steer-loader-ktt23-new-2/ https://businessindustrialspline.org/two-section-hydraulic-gear-pump-pgp51088g3lp-for-agt-skid-steer-loader-ktt23-new-2/#comments Tue, 12 May 2026 15:12:47 +0000 https://businessindustrialspline.org/two-section-hydraulic-gear-pump-pgp51088g3lp-for-agt-skid-steer-loader-ktt23-new-2/










Technical Data: Model Number: AGT-SLCLB (Two-Section) Pump Type: Dual-chamber hydraulic gear pump Mounting Spec: 5/8 9-spline A2 mount Feed Type: Dual suction, dual feed Main Inlet Port Dedicated to drive system Auxiliary Inlet Port Dedicated to hydraulic attachments Flow Capacity: Approx. 6-12 GPM Operating Pressure: Up to 3,000 psi (21 MPa) Construction High-strength cast housing. Compatible with: For Skid Steer Loader KTT23. The AGT Two-Section Hydraulic Pump is a dual-chamber, dual-suction, dual-feed mini skid steer pump engineered for precise flow control and reliable hydraulic performance. Built for compact loaders, this unit features independent circuits for main drive and auxiliary hydraulics, allowing simultaneous operation without power loss. It uses a 5/8 9-spline A2 mount and is built for high-duty applications where power split and flow consistency are critical. Package included: 1 X Hydraulic Pump (As shown in the picture). 100% working well, original standard, direct replacement for the old or broken one. Made with high quality material for maximum durability.

]]> https://businessindustrialspline.org/two-section-hydraulic-gear-pump-pgp51088g3lp-for-agt-skid-steer-loader-ktt23-new-2/feed/ 0 https://businessindustrialspline.org/13-spline-hydraulic-pump-coupler-d140524-for-case-480c-480d-480ll-580b-580c-580d/ https://businessindustrialspline.org/13-spline-hydraulic-pump-coupler-d140524-for-case-480c-480d-480ll-580b-580c-580d/#comments Sun, 26 Apr 2026 12:15:46 +0000 https://businessindustrialspline.org/13-spline-hydraulic-pump-coupler-d140524-for-case-480c-480d-480ll-580b-580c-580d/




D140524, D90883, A51885, 291061. For Case Track Crawler Models: 550, 550E, 550G, 550H. For Case Backhoe Loader models: 480C, 480D, 480E, 480E LL, 480F, 480F LL, 480 LL, 580B, 580C, 580D, 580SE. For Case Forklift Models: 584E, 585E, 586E. FITS CASE SKID STEER LOADER MODEL 1825.

]]> https://businessindustrialspline.org/13-spline-hydraulic-pump-coupler-d140524-for-case-480c-480d-480ll-580b-580c-580d/feed/ 0 https://businessindustrialspline.org/two-section-hydraulic-gear-pump-for-agt-skid-steer-loader-ktt23-pgp51088g3lp-new/ https://businessindustrialspline.org/two-section-hydraulic-gear-pump-for-agt-skid-steer-loader-ktt23-pgp51088g3lp-new/#comments Fri, 24 Apr 2026 12:11:47 +0000 https://businessindustrialspline.org/two-section-hydraulic-gear-pump-for-agt-skid-steer-loader-ktt23-pgp51088g3lp-new/


















Two-Section Hydraulic Gear Pump For AGT Skid Steer Loader KTT23 PGP51088G3LP New. NEW Two-Section Hydraulic Gear Pump For AGT Skid Steer Loader KTT23 PGP51088G3LP. 1 × Hydraulic Pump. 100% New & High Quality. Model Number: AGT-SLCLB (Two-Section). Pump Type: Dual-chamber hydraulic gear pump. Mounting Spec: 5/8 9-spline A2 mount. Feed Type: Dual suction, dual feed. Main Inlet Port Dedicated to drive system. Auxiliary Inlet Port Dedicated to hydraulic attachments. Operating Pressure: Up to 3,000 psi (21 MPa). Construction High-strength cast housing. Fitment Type: Direct Replacement. Color: as picture show. Quality materials, Reliable, Durable. Direct fit, no modification requires, easy installation! For Skid Steer Loader KTT23. Please check the OE/OEM part number before purchasing to ensure proper fitment. Communication is the best way to solve the problem. Please verify that our part number matches your vehicle model before placing an order. We will double-check and confirm for you. While we use vehicle compatible chart as a reference guide. Please note that this data may is not 100% accurate and comp. Upon receiving your order. Occasional issues may still occur. If any problems arise with your package. We will take responsibility and resolve it promptly. Please ensure all order details e. We will select the nearest warehouse from our five U. Based locations to fulfill your order. Rest assured-our dedicated team monitors all orders in real time. If you notice any logistics irregularities e. We’ll provide prompt solutions to protect your rights. All products are guaranteed for one year (if the products cannot be used normally within one year, new replacements will be issued for free). Please keep the return items in original packing condition. Prime-autoparts has been deeply committed to the automotive parts industry for over a decade, offering factory-grade components that either match or exceed OEM quality or are custom-tailored to your vehicle’s VIN. Our products share the same specifications as original factory parts and are compatible with GM, Mercedes-Benz, Audi, VW, BMW, Land Rover, and more. We will reply to you within 24 hours.

]]> https://businessindustrialspline.org/two-section-hydraulic-gear-pump-for-agt-skid-steer-loader-ktt23-pgp51088g3lp-new/feed/ 0 https://businessindustrialspline.org/parker-rotary-hydraulic-pump-spline-shaft-7029112079-8369-8682-902-caterpillar-2/ https://businessindustrialspline.org/parker-rotary-hydraulic-pump-spline-shaft-7029112079-8369-8682-902-caterpillar-2/#comments Wed, 22 Apr 2026 12:06:41 +0000 https://businessindustrialspline.org/parker-rotary-hydraulic-pump-spline-shaft-7029112079-8369-8682-902-caterpillar-2/







The Parker Rotary Hydraulic Pump Spline Shaft 7029112079 8369 8682-902 is a high-pressure hydraulic pump designed for industrial applications. With a rated pressure of 2000 psi (140 bar) and a single acting pump action, this hydraulic gear pump is designed for reliable and efficient power transmission. The pump features a 3/4 inch outlet port diameter and a 1 inch inlet port diameter, making it compatible with a variety of hydraulic systems. Made in the United States by Parker, a trusted brand in hydraulics, this pump is a quality and durable option for businesses and industries requiring precise and powerful hydraulic pumping solutions.

]]> https://businessindustrialspline.org/parker-rotary-hydraulic-pump-spline-shaft-7029112079-8369-8682-902-caterpillar-2/feed/ 0