https://businessindustrialspline.org Wed, 27 May 2026 16:12:45 +0000 en-CA hourly 1 https://wordpress.org/?v=4.1.1 https://businessindustrialspline.org/prince-double-gear-pump-976-86-cu-in-9-tooth-1632-spline-with-flow-divider/ https://businessindustrialspline.org/prince-double-gear-pump-976-86-cu-in-9-tooth-1632-spline-with-flow-divider/#comments Sun, 20 Dec 2020 01:56:07 +0000 http://businessindustrialspline.org/prince-double-gear-pump-976-86-cu-in-9-tooth-1632-spline-with-flow-divider/







Double Gear Pump with Priority Flow Divider. Max PSI: Front: 2200 Rear: 2400. #16 SAE Inlet Ports (Common Inlet). #10 SAE Outlet Port (Front). #12 SAE Outlet Port (Rear) (Excess Flow). #6 SAE Outlet Port (Rear) (Controlled Flow). SAE 9 Tooth 16/32 Spline Shaft. Clockwise drive shaft rotation. Relief set at 1500 PSI. Priority Flow to be 3.0 GPM at 2000 RPM with minimum pressure on both excess and controlled flow ports. Bearings PTFE composite bearings are used due to the ability to handle heavy loads, low shaft speeds, and high levels of contamination. Engineering tests on the PTFE bearings indicate they will withstand bearing loads over twice as high as conventional steel backed aluminum bearings used in many pumps. The PTFE resin layer will absorb a high degree of contamination with out damage to the pump. Also since the PTFE layer is self lubricating, contamination from bearing wear in high load situations (when no oil film is present) is reduced. The side benefit from reduced friction under all conditions is a reduced consumption of power. Gears and drive shaft are hardened alloy steel of one piece construction. Special gear design: Non-symmetrical gear insures low noise and compactness. Dependable service: Balanced pressure loading insures small dispersion, good durability and maintains high performance. Perfect alignment: Through bore design provides perfect alignment of pump element and assures even bearing load. The item “Prince Double Gear Pump. 976/. 86 Cu In, 9 Tooth 16/32 Spline, with Flow Divider” is in sale since Friday, April 17, 2020. This item is in the category “Business & Industrial\Hydraulics, Pneumatics, Pumps & Plumbing\Pumps & Pump Accessories\Hydraulic Pumps”. The seller is “daltonhyd” and is located in Blaine, Tennessee. This item can be shipped to United States.

• Custom Bundle: No
• MPN: SP-F58
• Shaft Rotation: CW
• Modified Item: No
• Pump Action: Gear Pump
• Rated Pressure: 2200 PSI
• Inlet Port Diameter: #16 SAE
• Power Source: Hydraulic
• Hydraulic Pump Type: Hydraulic Gear Pump
• Country/Region of Manufacture: United States
• Front Section Cu. In. Displacement: .976
• Rated Power: 8.45 & 7.45 GPM @ 2000 RPM
• Rear Section Cu. In. Displacement: .86
• Reservoir Capacity: Does Not Apply
• Max RPM: 3500
• Brand: Prince
• Outlet Port Diameter: #10 SAE
• Mount: 2 Bolt “A” Flange
• Type: Hydraulic

]]> https://businessindustrialspline.org/prince-double-gear-pump-976-86-cu-in-9-tooth-1632-spline-with-flow-divider/feed/ 0 https://businessindustrialspline.org/prince-double-gear-pump-2-318-cu-in-sae-b-2-bolt-mount-13-tooth-1632-spline/ https://businessindustrialspline.org/prince-double-gear-pump-2-318-cu-in-sae-b-2-bolt-mount-13-tooth-1632-spline/#comments Thu, 12 Nov 2020 05:07:04 +0000 http://businessindustrialspline.org/prince-double-gear-pump-2-318-cu-in-sae-b-2-bolt-mount-13-tooth-1632-spline/







Displacement (Front & Rear). Max PSI: Front: 3000 Rear: 2700. #20 SAE Inlet Ports. #16 SAE Outlet Ports. SAE 13 Tooth 16/32 Spline Shaft. Counter Clockwise drive shaft rotation. Side inlets and outlets. Bearings PTFE composite bearings are used due to the ability to handle heavy loads, low shaft speeds, and high levels of contamination. Engineering tests on the PTFE bearings indicate they will withstand bearing loads over twice as high as conventional steel backed aluminum bearings used in many pumps. The PTFE resin layer will absorb a high degree of contamination with out damage to the pump. Also since the PTFE layer is self lubricating, contamination from bearing wear in high load situations (when no oil film is present) is reduced. The side benefit from reduced friction under all conditions is a reduced consumption of power. Gears and drive shaft are hardened alloy steel of one piece construction. Special gear design: Non-symmetrical gear insures low noise and compactness. Dependable service: Balanced pressure loading insures small dispersion, good durability and maintains high performance. Perfect alignment: Through bore design provides perfect alignment of pump element and assures even bearing load. The item “Prince Double Gear Pump 2.318 cu in, SAE B 2-Bolt mount, 13 Tooth 16/32 Spline” is in sale since Friday, April 17, 2020. This item is in the category “Business & Industrial\Hydraulics, Pneumatics, Pumps & Plumbing\Pumps & Pump Accessories\Hydraulic Pumps”. The seller is “daltonhyd” and is located in Blaine, Tennessee. This item can be shipped to United States.

• Cu. In. Displacement: 2.318 both sections
• Custom Bundle: No
• MPN: SPD33838-2H1L
• Shaft Rotation: CCW
• Modified Item: No
• Pump Action: Gear Pump
• Rated Pressure: 2700 PSI
• Inlet Port Diameter: #20 SAE
• Power Source: Hydraulic
• Hydraulic Pump Type: Hydraulic Gear Pump
• Country/Region of Manufacture: United States
• Rated Power: 20.07 GPM @ 2000 RPM
• Reservoir Capacity: Does Not Apply
• Max RPM: 3000
• Brand: Prince
• Outlet Port Diameter: #16 SAE
• Mount: 2 Bolt “B” Flange
• Type: Hydraulic

]]> https://businessindustrialspline.org/prince-double-gear-pump-2-318-cu-in-sae-b-2-bolt-mount-13-tooth-1632-spline/feed/ 0 https://businessindustrialspline.org/prince-gerotor-motor-24-4-cu-in-10-sae-ports-4-bolt-flange-1-splined-shaft/ https://businessindustrialspline.org/prince-gerotor-motor-24-4-cu-in-10-sae-ports-4-bolt-flange-1-splined-shaft/#comments Sat, 17 Oct 2020 13:21:18 +0000 http://businessindustrialspline.org/prince-gerotor-motor-24-4-cu-in-10-sae-ports-4-bolt-flange-1-splined-shaft/






GEROTOR MOTOR LOW SPEED HIGH TORQUE. Cu In/Rev: 24.4. Fully reversible simply by reversing the direction of hydraulic fluid flow. The item “Prince Gerotor Motor, 24.4 Cu. In, #10 SAE Ports, 4 Bolt Flange, 1 Splined Shaft” is in sale since Thursday, April 16, 2020. This item is in the category “Business & Industrial\Hydraulics, Pneumatics, Pumps & Plumbing\Hydraulic & Pneumatic Motors”. The seller is “daltonhyd” and is located in Blaine, Tennessee. This item can be shipped to United States.

• Maximum Intermittent Flow Rate: 20 GPM
• Modified Item: No
• Country/Region of Manufacture: United States
• Custom Bundle: No
• Maximum Continuous Torque: 3604 in-lbs
• Inlet Port Diameter: #10 SAE
• Maximum Intermittent Pressure: 1300 PSI
• MPN: ADM400-4S0
• Shaft Diameter: 1 in SAE – 6B Spline
• Mounting Type: Flange Mounted
• Maximum Continuous Pressure: 900 PSI
• Maximum Continuous Flow Rate: 15 GPM
• Brand: Prince
• Rated Power: 24.4 Cu. In.
• Maximum Intermittent Torque: 4283 in-lbs
• Outlet Port Diameter: #10 SAE

]]> https://businessindustrialspline.org/prince-gerotor-motor-24-4-cu-in-10-sae-ports-4-bolt-flange-1-splined-shaft/feed/ 0 https://businessindustrialspline.org/used-prince-cast-iron-pto-hydraulic-pump-hc-pto-3ac-1-38-21-spline-bore/ https://businessindustrialspline.org/used-prince-cast-iron-pto-hydraulic-pump-hc-pto-3ac-1-38-21-spline-bore/#comments Fri, 25 Aug 2017 08:48:31 +0000 http://businessindustrialspline.org/used-prince-cast-iron-pto-hydraulic-pump-hc-pto-3ac-1-38-21-spline-bore/






Product Features & Part Number. 2250 Psi 1000 RPM CW Rotation #16 SAE O-Ring Inlet #12 SAE O-Ring Outlet 5.7 Cubic In. So please make sure that is up to date at the time of check-out. Item cannot have been installed, sealed packages opened or parts missing etc. Feedback is very important to me and I do everything I can to keep my customers happy. The item “Used Prince Cast Iron PTO Hydraulic Pump HC-PTO-3AC 1-3/8 21 Spline Bore” is in sale since Friday, December 09, 2016. This item is in the category “Business & Industrial\Heavy Equipment Parts & Accs\Forklift Parts & Accessories\Motors & Pumps”. The seller is “skyline_mountain_express” and is located in South Jordan, Utah. This item can be shipped to United States.

• Brand: Prince Hydraulics
• MPN: HC-PTO-3AC

]]> https://businessindustrialspline.org/used-prince-cast-iron-pto-hydraulic-pump-hc-pto-3ac-1-38-21-spline-bore/feed/ 0 https://businessindustrialspline.org/prince-manufacturing-hydraulic-tractor-pto-gear-pump-hc-pto-6-1000-rpm-spline/ https://businessindustrialspline.org/prince-manufacturing-hydraulic-tractor-pto-gear-pump-hc-pto-6-1000-rpm-spline/#comments Wed, 12 Oct 2016 17:13:10 +0000 http://businessindustrialspline.org/prince-manufacturing-hydraulic-tractor-pto-gear-pump-hc-pto-6-1000-rpm-spline/






New never used in org box prince hc pto-6 hyd pump 1000 rpm spline see sheet thats in the box that came with it for ratings its a cast pump. The item “Prince Manufacturing Hydraulic Tractor PTO Gear Pump HC-PTO-6 1000 rpm spline” is in sale since Tuesday, October 11, 2016. This item is in the category “Business & Industrial\MRO & Industrial Supply\Hydraulics & Pneumatics\Other Hydraulics & Pneumatics”. The seller is “willysjeep4wd” and is located in Mitchell, Nebraska. This item can be shipped to United States, to Canada, to United Kingdom, to China, to Mexico, to Germany, to Japan, to France, to Australia, RU.

• Type: Hydraulic
• Brand: Prince
• MPN: HC-PTO-6
• Country of Manufacture: United States
• Part Type: Pump
• Operation Type: Hydraulic

]]> https://businessindustrialspline.org/prince-manufacturing-hydraulic-tractor-pto-gear-pump-hc-pto-6-1000-rpm-spline/feed/ 0 https://businessindustrialspline.org/prince-hydraulic-pto-tractor-pump-hc-pto-1a-21gpm-540rpm-6-tooth-spline-new-4/ https://businessindustrialspline.org/prince-hydraulic-pto-tractor-pump-hc-pto-1a-21gpm-540rpm-6-tooth-spline-new-4/#comments Fri, 26 Aug 2016 23:25:29 +0000 http://businessindustrialspline.org/prince-hydraulic-pto-tractor-pump-hc-pto-1a-21gpm-540rpm-6-tooth-spline-new-4/











THIS LISTING IS FOR ONE NEW PRINCE MANUFACTURING HYDRAULIC PTO PUMP. NEW IN ORIGINAL BOX AS SHOWN IN PHOTOS. HYDRAULIC PTO TRACTOR PUMP. 540 RPM (600 RPM MAX). SHAFT TYPE: FEMALE, 1-3/8 SHAFT. MATERIAL: ALUMINUM, CAST IRON. TRACTOR HP: 38 HP MIN. RATED TO 2,000PSI. The item “PRINCE HYDRAULIC PTO TRACTOR PUMP HC-PTO-1A 21GPM 540RPM 6 TOOTH SPLINE NEW” is in sale since Friday, August 26, 2016. This item is in the category “Business & Industrial\Heavy Equipment Parts & Accs\Tractor Parts”. The seller is “anainstr” and is located in King George, Virginia. This item can be shipped to United States.

• Brand: Prince Hydraulic
• MPN: HC-PTO-1A

]]> https://businessindustrialspline.org/prince-hydraulic-pto-tractor-pump-hc-pto-1a-21gpm-540rpm-6-tooth-spline-new-4/feed/ 0 https://businessindustrialspline.org/prince-hydraulic-pto-tractor-pump-hc-pto-1a-21gpm-540rpm-6-tooth-spline-new-3/ https://businessindustrialspline.org/prince-hydraulic-pto-tractor-pump-hc-pto-1a-21gpm-540rpm-6-tooth-spline-new-3/#comments Sat, 09 Jul 2016 21:24:00 +0000 http://businessindustrialspline.org/prince-hydraulic-pto-tractor-pump-hc-pto-1a-21gpm-540rpm-6-tooth-spline-new-3/











THIS LISTING IS FOR ONE NEW PRINCE MANUFACTURING HYDRAULIC PTO PUMP. NEW IN ORIGINAL BOX AS SHOWN IN PHOTOS. HYDRAULIC PTO TRACTOR PUMP. 540 RPM (600 RPM MAX). SHAFT TYPE: FEMALE, 1-3/8 SHAFT. MATERIAL: ALUMINUM, CAST IRON. TRACTOR HP: 38 HP MIN. RATED TO 2,000PSI. The item “PRINCE HYDRAULIC PTO TRACTOR PUMP HC-PTO-1A 21GPM 540RPM 6 TOOTH SPLINE NEW” is in sale since Friday, July 08, 2016. This item is in the category “Business & Industrial\Heavy Equipment Parts & Accs\Tractor Parts”. The seller is “anainstr” and is located in King George, Virginia. This item can be shipped to United States.

• Brand: Prince Hydraulic
• MPN: HC-PTO-1A

]]> https://businessindustrialspline.org/prince-hydraulic-pto-tractor-pump-hc-pto-1a-21gpm-540rpm-6-tooth-spline-new-3/feed/ 0 https://businessindustrialspline.org/prince-hydraulic-pto-tractor-pump-hc-pto-1a-21gpm-540rpm-6-tooth-spline-new-2/ https://businessindustrialspline.org/prince-hydraulic-pto-tractor-pump-hc-pto-1a-21gpm-540rpm-6-tooth-spline-new-2/#comments Wed, 29 Jun 2016 20:09:02 +0000 http://businessindustrialspline.org/prince-hydraulic-pto-tractor-pump-hc-pto-1a-21gpm-540rpm-6-tooth-spline-new-2/









THIS LISTING IS FOR ONE NEW PRINCE MANUFACTURING HYDRAULIC PTO PUMP. NEW IN ORIGINAL BOX AS SHOWN IN PHOTOS. HYDRAULIC PTO TRACTOR PUMP. 540 RPM (600 RPM MAX). SHAFT TYPE: FEMALE, 1-3/8 SHAFT. MATERIAL: ALUMINUM, CAST IRON. TRACTOR HP: 38 HP MIN. RATED TO 2,000PSI. The item “PRINCE HYDRAULIC PTO TRACTOR PUMP HC-PTO-1A 21GPM 540RPM 6 TOOTH SPLINE NEW” is in sale since Tuesday, June 28, 2016. This item is in the category “Business & Industrial\Heavy Equipment Parts & Accs\Tractor Parts”. The seller is “anaexcess” and is located in King George, Virginia. This item can be shipped to United States.

• Brand: PRINCE
• Part Type: PTO PUMP
• MPN: HC-PTO-1A
• Model: HC-PTO-1A

]]> https://businessindustrialspline.org/prince-hydraulic-pto-tractor-pump-hc-pto-1a-21gpm-540rpm-6-tooth-spline-new-2/feed/ 0 https://businessindustrialspline.org/prince-hydraulic-pto-tractor-pump-hc-pto-1a-21gpm-540rpm-6-tooth-spline-new/ https://businessindustrialspline.org/prince-hydraulic-pto-tractor-pump-hc-pto-1a-21gpm-540rpm-6-tooth-spline-new/#comments Fri, 27 May 2016 03:45:01 +0000 http://businessindustrialspline.org/prince-hydraulic-pto-tractor-pump-hc-pto-1a-21gpm-540rpm-6-tooth-spline-new/









THIS LISTING IS FOR ONE NEW PRINCE MANUFACTURING HYDRAULIC PTO PUMP. NEW IN ORIGINAL BOX AS SHOWN IN PHOTOS. HYDRAULIC PTO TRACTOR PUMP. 540 RPM (600 RPM MAX). SHAFT TYPE: FEMALE, 1-3/8 SHAFT. MATERIAL: ALUMINUM, CAST IRON. TRACTOR HP: 38 HP MIN. RATED TO 2,000PSI. The item “PRINCE HYDRAULIC PTO TRACTOR PUMP HC-PTO-1A 21GPM 540RPM 6 TOOTH SPLINE NEW” is in sale since Tuesday, May 24, 2016. This item is in the category “Business & Industrial\Heavy Equipment Parts & Accs\Tractor Parts”. The seller is “anaexcess” and is located in King George, Virginia. This item can be shipped to United States.

• Brand: PRINCE
• Part Type: PTO PUMP
• MPN: HC-PTO-1A
• Model: HC-PTO-1A

]]> https://businessindustrialspline.org/prince-hydraulic-pto-tractor-pump-hc-pto-1a-21gpm-540rpm-6-tooth-spline-new/feed/ 0