Business Industrial Spline » pilot https://businessindustrialspline.org Sat, 27 Jun 2026 17:55:45 +0000 en-CA hourly 1 https://wordpress.org/?v=4.1.1 Solid-Body Hard-Head Bits Spline Spline Pilot for 1-3/4 thru 3 Heads 24 Depth https://businessindustrialspline.org/solid-body-hard-head-bits-spline-spline-pilot-for-1-34-thru-3-heads-24-depth/ https://businessindustrialspline.org/solid-body-hard-head-bits-spline-spline-pilot-for-1-34-thru-3-heads-24-depth/#comments Fri, 04 Apr 2025 08:48:39 +0000 https://businessindustrialspline.org/solid-body-hard-head-bits-spline-spline-pilot-for-1-34-thru-3-heads-24-depth/

Solid-Body Hard-Head Bits Spline Spline Pilot for 1-3/4 thru 3 Heads 24 Depth
Relton Solid-Body Hard-Head Bits Spline Shank Pilot for 1-3/4″ thru 3″ Heads – 24 Drilling Depth. Relton’s “Hard-Head” bits are designed to bore large holes through concrete without the need to break out the core every few inches. Slide the taper end of the shank into the “hard-head” bit. A slight twisting motion will help keep the bit from falling off before beginning the cut. The pilot is intergrated on the shank, this way drilling can be accomplished with no interruption! Once used, the shank and head will become one piece. Minimum Order: 1 Each. Listing is for Shank/Pilot ONLY. By placing an order with LK Technologies, Inc. We also accept Cashier’s Checks and Bank Wire Transfers. Please specify the reason for the return. All return requests are permitted within 15 (fifteen) calendar days from the date of receipt of merchandise. Only if the items are in resalable condition. Product packaging must be in like-new condition; products will not be accepted for return if the packaging is cut, torn, written on, or otherwise damaged. THANK YOU FOR PLACING YOUR ORDER WITH TECHNOLOGYLK! WE APPRECIATE YOUR BUSINESS!
Solid-Body Hard-Head Bits Spline Spline Pilot for 1-3/4 thru 3 Heads 24 Depth
]]> https://businessindustrialspline.org/solid-body-hard-head-bits-spline-spline-pilot-for-1-34-thru-3-heads-24-depth/feed/ 0 Adapter 5/8-11 Male to SPLINE drive with pilot bit & 4” dry core bit concrete https://businessindustrialspline.org/adapter-58-11-male-to-spline-drive-with-pilot-bit-4-dry-core-bit-concrete/ https://businessindustrialspline.org/adapter-58-11-male-to-spline-drive-with-pilot-bit-4-dry-core-bit-concrete/#comments Mon, 30 Jan 2023 18:39:42 +0000 https://businessindustrialspline.org/adapter-58-11-male-to-spline-drive-with-pilot-bit-4-dry-core-bit-concrete/
Adapter 5/8-11 Male to SPLINE drive with pilot bit & 4'' dry core bit concrete
Adapter 5/8-11 Male to SPLINE drive with pilot bit & 4'' dry core bit concrete
Adapter 5/8-11 Male to SPLINE drive with pilot bit & 4'' dry core bit concrete
Adapter 5/8-11 Male to SPLINE drive with pilot bit & 4'' dry core bit concrete
Adapter 5/8-11 Male to SPLINE drive with pilot bit & 4'' dry core bit concrete
Adapter 5/8-11 Male to SPLINE drive with pilot bit & 4'' dry core bit concrete
Adapter 5/8-11 Male to SPLINE drive with pilot bit & 4'' dry core bit concrete
Adapter 5/8-11 Male to SPLINE drive with pilot bit & 4'' dry core bit concrete
Adapter 5/8-11 Male to SPLINE drive with pilot bit & 4'' dry core bit concrete
Adapter 5/8-11 Male to SPLINE drive with pilot bit & 4'' dry core bit concrete
Adapter 5/8-11 Male to SPLINE drive with pilot bit & 4'' dry core bit concrete

Adapter 5/8-11 Male to SPLINE drive with pilot bit & 4'' dry core bit concrete
4 PROFESSIONAL LASER WELDED TURBO SEGMENTED DRY CORE BIT WITH. Spline To 5/8-11 Threaded Bit Connection for Hammer Drill. With pilot bit (center guide). THIS CORE BIT IS MANUFACTURED FOR DRILLING MASONRY, CURED & REINFORCED CONCRETE WITH MEDIUM TO HARD AGGREGATES & MEDIUM STEEL REINFORCING. THE 12MM TURBO SEGMENTS HAVE THE HIGHEST DIAMOND PARTICLES PER SEGMENT IN THE INDUSTRY. THE NOTCH GROOVE IN SEGMENTS ARE DESIGNED IN AIDING WITH STEEL AGGREGATES IN CONCRETE.. Barrel color may vary. SEGMENT MOLD: GROOVED TURBO SEGMENT STYLE. MATRIX HARDNESS: SOFT BOND FOR HARD MATERIALS WITH STEEL REINFORCING. BOND TO CORE: INNER/OUTER DOUBLE LASER WELD. Core Drill Bit Adapter 5/8-11 Male to Spline Drive for Hammer Drills. Quality adapter is made from heavy steel. Easily convert 5/8-11 female arbor to. Perfect accessory for your spline hammer drill. INSTRUCTIONS FOR CENTER GUIDE USE. (1) ATTACH CENTER GUIDE TO ADAPTER BY PUSHING IT INTO HOLE. THE HEAT EXPANDS THE METAL IN THE CENTER GUIDE AND WILL HOLD IN PLACE TO START HOLE. (2) THREAD ON TO DRILL. (3) SCREW DRY CORE BIT OVER ADAPTER. (4) PENETRATE MATERIAL ABOUT 3/4″ TO 1 ½” (PASS THE LASER WELDED SEGMENTS). (5) REMOVE TWIST BIT (WILL COME OUT WITH PLIERS, MONKEY WRENCH OR SCREW DRIVER INSIDE ADAPTER HOLE). (6) CONTINUE DRILLING USING THE BARREL AS NEW GUIDE. DO NOT CORE WITH CENTER GUIDE IN BARREL. This item is in the category “Business & Industrial\Light Equipment & Tools\Drills & Hammers\Core Drills & Rigs”. The seller is “fc727″ and is located in this country: US. This item can be shipped worldwide.
  • Model: Trueline Products
  • Type: Core Drill
  • Brand: Pro Right Industry

Adapter 5/8-11 Male to SPLINE drive with pilot bit & 4'' dry core bit concrete
]]> https://businessindustrialspline.org/adapter-58-11-male-to-spline-drive-with-pilot-bit-4-dry-core-bit-concrete/feed/ 0 Adapter 5/8-11 Male to SPLINE drive with pilot bit & 2” dry core bit concrete https://businessindustrialspline.org/adapter-58-11-male-to-spline-drive-with-pilot-bit-2-dry-core-bit-concrete/ https://businessindustrialspline.org/adapter-58-11-male-to-spline-drive-with-pilot-bit-2-dry-core-bit-concrete/#comments Tue, 30 Aug 2022 17:30:01 +0000 https://businessindustrialspline.org/adapter-58-11-male-to-spline-drive-with-pilot-bit-2-dry-core-bit-concrete/
Adapter 5/8-11 Male to SPLINE drive with pilot bit & 2'' dry core bit concrete
Adapter 5/8-11 Male to SPLINE drive with pilot bit & 2'' dry core bit concrete
Adapter 5/8-11 Male to SPLINE drive with pilot bit & 2'' dry core bit concrete
Adapter 5/8-11 Male to SPLINE drive with pilot bit & 2'' dry core bit concrete
Adapter 5/8-11 Male to SPLINE drive with pilot bit & 2'' dry core bit concrete
Adapter 5/8-11 Male to SPLINE drive with pilot bit & 2'' dry core bit concrete
Adapter 5/8-11 Male to SPLINE drive with pilot bit & 2'' dry core bit concrete
Adapter 5/8-11 Male to SPLINE drive with pilot bit & 2'' dry core bit concrete
Adapter 5/8-11 Male to SPLINE drive with pilot bit & 2'' dry core bit concrete
Adapter 5/8-11 Male to SPLINE drive with pilot bit & 2'' dry core bit concrete
Adapter 5/8-11 Male to SPLINE drive with pilot bit & 2'' dry core bit concrete

Adapter 5/8-11 Male to SPLINE drive with pilot bit & 2'' dry core bit concrete
2 PROFESSIONAL LASER WELDED TURBO SEGMENTED DRY CORE BIT WITH. Spline To 5/8-11 Threaded Bit Connection for Hammer Drill. With pilot bit (center guide). THIS CORE BIT IS MANUFACTURED FOR DRILLING MASONRY, CURED & REINFORCED CONCRETE WITH MEDIUM TO HARD AGGREGATES & MEDIUM STEEL REINFORCING. THE 12MM TURBO SEGMENTS HAVE THE HIGHEST DIAMOND PARTICLES PER SEGMENT IN THE INDUSTRY. THE NOTCH GROOVE IN SEGMENTS ARE DESIGNED IN AIDING WITH STEEL AGGREGATES IN CONCRETE.. Barrel color may vary. SEGMENT MOLD: GROOVED TURBO SEGMENT STYLE. MATRIX HARDNESS: SOFT BOND FOR HARD MATERIALS WITH STEEL REINFORCING. BOND TO CORE: INNER/OUTER DOUBLE LASER WELD. Core Drill Bit Adapter 5/8-11 Male to Spline Drive for Hammer Drills. Quality adapter is made from heavy steel. Easily convert 5/8-11 female arbor to. Perfect accessory for your spline hammer drill. INSTRUCTIONS FOR CENTER GUIDE USE. (1) ATTACH CENTER GUIDE TO ADAPTER BY PUSHING IT INTO HOLE. THE HEAT EXPANDS THE METAL IN THE CENTER GUIDE AND WILL HOLD IN PLACE TO START HOLE. (2) THREAD ON TO DRILL. (3) SCREW DRY CORE BIT OVER ADAPTER. (4) PENETRATE MATERIAL ABOUT 3/4″ TO 1 ½” (PASS THE LASER WELDED SEGMENTS). (5) REMOVE TWIST BIT (WILL COME OUT WITH PLIERS, MONKEY WRENCH OR SCREW DRIVER OR JUST WIGGLE IT OUT OF ADAPTER). (6) CONTINUE DRILLING USING THE BARREL AS NEW GUIDE. DO NOT CORE WITH CENTER GUIDE IN BARREL. This item is in the category “Business & Industrial\Light Equipment & Tools\Drills & Hammers\Core Drills & Rigs”. The seller is “fc727″ and is located in this country: US. This item can be shipped worldwide.
  • Model: Trueline Products
  • Type: Core Drill
  • Brand: Pro Right Industry

Adapter 5/8-11 Male to SPLINE drive with pilot bit & 2'' dry core bit concrete
]]> https://businessindustrialspline.org/adapter-58-11-male-to-spline-drive-with-pilot-bit-2-dry-core-bit-concrete/feed/ 0 Adapter 5/8-11 Male to SPLINE drive with pilot bit 1 1/4” dry core bit concrete https://businessindustrialspline.org/adapter-58-11-male-to-spline-drive-with-pilot-bit-1-14-dry-core-bit-concrete/ https://businessindustrialspline.org/adapter-58-11-male-to-spline-drive-with-pilot-bit-1-14-dry-core-bit-concrete/#comments Tue, 14 Jun 2022 14:30:22 +0000 https://businessindustrialspline.org/adapter-58-11-male-to-spline-drive-with-pilot-bit-1-14-dry-core-bit-concrete/
Adapter 5/8-11 Male to SPLINE drive with pilot bit 1 1/4'' dry core bit concrete
Adapter 5/8-11 Male to SPLINE drive with pilot bit 1 1/4'' dry core bit concrete
Adapter 5/8-11 Male to SPLINE drive with pilot bit 1 1/4'' dry core bit concrete
Adapter 5/8-11 Male to SPLINE drive with pilot bit 1 1/4'' dry core bit concrete
Adapter 5/8-11 Male to SPLINE drive with pilot bit 1 1/4'' dry core bit concrete
Adapter 5/8-11 Male to SPLINE drive with pilot bit 1 1/4'' dry core bit concrete
Adapter 5/8-11 Male to SPLINE drive with pilot bit 1 1/4'' dry core bit concrete
Adapter 5/8-11 Male to SPLINE drive with pilot bit 1 1/4'' dry core bit concrete
Adapter 5/8-11 Male to SPLINE drive with pilot bit 1 1/4'' dry core bit concrete
Adapter 5/8-11 Male to SPLINE drive with pilot bit 1 1/4'' dry core bit concrete
Adapter 5/8-11 Male to SPLINE drive with pilot bit 1 1/4'' dry core bit concrete

Adapter 5/8-11 Male to SPLINE drive with pilot bit 1 1/4'' dry core bit concrete
1 1/4 PROFESSIONAL LASER WELDED TURBO SEGMENTED DRY CORE BIT WITH. Spline To 5/8-11 Threaded Bit Connection for Hammer Drill. With pilot bit (center guide). THIS CORE BIT IS MANUFACTURED FOR DRILLING MASONRY, CURED & REINFORCED CONCRETE WITH MEDIUM TO HARD AGGREGATES & MEDIUM STEEL REINFORCING. THE 12MM TURBO SEGMENTS HAVE THE HIGHEST DIAMOND PARTICLES PER SEGMENT IN THE INDUSTRY. THE NOTCH GROOVE IN SEGMENTS ARE DESIGNED IN AIDING WITH STEEL AGGREGATES IN CONCRETE.. Barrel color may vary. OUTER DIAMETER: 1 1/4. SEGMENT MOLD: GROOVED TURBO SEGMENT STYLE. MATRIX HARDNESS: SOFT BOND FOR HARD MATERIALS WITH STEEL REINFORCING. BOND TO CORE: INNER/OUTER DOUBLE LASER WELD. Core Drill Bit Adapter 5/8-11 Male to Spline Drive for Hammer Drills. Quality adapter is made from heavy steel. Easily convert 5/8-11 female arbor to. Perfect accessory for your spline hammer drill. INSTRUCTIONS FOR CENTER GUIDE USE. (1) ATTACH CENTER GUIDE TO ADAPTER BY PUSHING IT INTO HOLE. THE HEAT EXPANDS THE METAL IN THE CENTER GUIDE AND WILL HOLD IN PLACE TO START HOLE. (2) THREAD ON TO DRILL. (3) SCREW DRY CORE BIT OVER ADAPTER. (4) PENETRATE MATERIAL ABOUT 3/4″ TO 1 ½” (PASS THE LASER WELDED SEGMENTS). (5) REMOVE TWIST BIT (WILL COME OUT WITH PLIERS, MONKEY WRENCH OR SCREW DRIVER OR JUST WIGGLE IT OUT OF ADAPTER). (6) CONTINUE DRILLING USING THE BARREL AS NEW GUIDE. DO NOT CORE WITH CENTER GUIDE IN BARREL. This item is in the category “Business & Industrial\Light Equipment & Tools\Drills & Hammers\Core Drills & Rigs”. The seller is “fc727″ and is located in this country: US. This item can be shipped worldwide.
  • Model: Trueline Products
  • Type: Core Drill
  • Brand: Pro Right Industry

Adapter 5/8-11 Male to SPLINE drive with pilot bit 1 1/4'' dry core bit concrete
]]> https://businessindustrialspline.org/adapter-58-11-male-to-spline-drive-with-pilot-bit-1-14-dry-core-bit-concrete/feed/ 0 Yanmar Clutch NEW Pressure Plate 20 Spline Disc Pilot Bushing Alignment Tool https://businessindustrialspline.org/yanmar-clutch-new-pressure-plate-20-spline-disc-pilot-bushing-alignment-tool/ https://businessindustrialspline.org/yanmar-clutch-new-pressure-plate-20-spline-disc-pilot-bushing-alignment-tool/#comments Sat, 19 Mar 2022 21:11:26 +0000 https://businessindustrialspline.org/yanmar-clutch-new-pressure-plate-20-spline-disc-pilot-bushing-alignment-tool/
Yanmar Clutch NEW Pressure Plate 20 Spline Disc Pilot Bushing Alignment Tool
Yanmar Clutch NEW Pressure Plate 20 Spline Disc Pilot Bushing Alignment Tool
Yanmar Clutch NEW Pressure Plate 20 Spline Disc Pilot Bushing Alignment Tool
Yanmar Clutch NEW Pressure Plate 20 Spline Disc Pilot Bushing Alignment Tool

Yanmar Clutch NEW Pressure Plate 20 Spline Disc Pilot Bushing Alignment Tool
Yanmar Clutch Kit NEW Pressure Plate 20 Spline Disc Pilot Bushing Alignment Tool. This is a new 8 pressure plate and new 20 spline disc for many Yanmar tractors. Kit comes with a new realease bearing, pilot bushing and alignment tool. We at M & M Products are a stocking distributor for Briggs and Stratton, Kohler, and Toro. We not only sell their OEM parts we also use them on our equipment repairs and rebuilds. If there is something you need and don’t see. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment Parts & Accessories\Antique & Vintage Equipment Parts”. The seller is “mandmproducts” and is located in this country: US. This item can be shipped worldwide.
  • Model: 1600 1600D 1700d, 1810 1810d 1900 1900d 195 195d
  • Modified Item: No
  • Country/Region of Manufacture: Unknown
  • Compatible Equipment Make: Yanmar
  • Model Year: All
  • Part Type: Clutch Kit
  • Brand: Unbranded/Generic
  • Compatible Equipment Type: Tractor

Yanmar Clutch NEW Pressure Plate 20 Spline Disc Pilot Bushing Alignment Tool
]]> https://businessindustrialspline.org/yanmar-clutch-new-pressure-plate-20-spline-disc-pilot-bushing-alignment-tool/feed/ 0