https://businessindustrialspline.org Wed, 22 Apr 2026 12:06:41 +0000 en-CA hourly 1 https://wordpress.org/?v=4.1.1 https://businessindustrialspline.org/titan-gearbox-shearpin-45hp-fits-45-mowers-12-spline-many-brands/ https://businessindustrialspline.org/titan-gearbox-shearpin-45hp-fits-45-mowers-12-spline-many-brands/#comments Sat, 28 Mar 2026 08:13:44 +0000 https://businessindustrialspline.org/titan-gearbox-shearpin-45hp-fits-45-mowers-12-spline-many-brands/







Hours 7:30 to 5:00 EST M-F till noon on Saturday. This gearbox fits several different makes of 4′, 5′ and some 6′ rotary cutters. I sell a lot of these boxes every year for several different applications and carry ALL REPLACEMENT PARTS for this box, but hopefully you won’t have to worry about that. Here are the specs on the box. 45 horse power gearbox. Standard 1-3/8 smooth input shaft(where the pto shaft hooks on). The pto shaft is held on by a 1/2 shearbolt. Length of the input shaft out of the gearbox is 3 long. Gear Ratio: 1 to 1.47. Bolt hole pattern for mounting is on the corners, 4-3/4 center of hole to center of hole. It takes a 5/8 bolt. 12 splined output shaft(where the blade carrier hooks up on the bottom). 1-9/16 outside measurement over the output shaft splines- from the base of the output cap to the end of the splines is 2-3/4″ long- overall length of the output shaft is 4-1/2″ long. Takes a 1 threaded castle nut and a carter key on the bottom of the output shaft to secure blade pan(which is included). Overall height of the box from the top of the mower deck to the top of the box is 9-1/2. It takes 80-90 gear oil. Look at the pictures and the one of the back of the gearbox, you will see a plug on the top and a small little pipe plug on the bottom right side. The top hole is where you put the oil in, you take out the pipe plug and as you pour the oil in and when it starts running out of the pipe plug hole then it is full. You only fill the box roughly half way, if you overfill the breather plug will release some of the pressure but you also run the risk of blowing out one of your oil seals so try to maintain adequate oil levels. Of course you do this with the box mounted and in an upright position. We stock all parts for everything we sell. Thank you and God bless.

]]> https://businessindustrialspline.org/titan-gearbox-shearpin-45hp-fits-45-mowers-12-spline-many-brands/feed/ 0 https://businessindustrialspline.org/series-5-pto-shaft-1-38-6-spline-both-ends-with-slip-clutch-for-finish-mowers-2/ https://businessindustrialspline.org/series-5-pto-shaft-1-38-6-spline-both-ends-with-slip-clutch-for-finish-mowers-2/#comments Sun, 01 Mar 2026 07:53:47 +0000 https://businessindustrialspline.org/series-5-pto-shaft-1-38-6-spline-both-ends-with-slip-clutch-for-finish-mowers-2/







Motorcycle Chains & Sprockets. Car Racks and Tire Chains. Frequently Bought Together Kit. Add to Favorite Sellers. Sign up to Newsletter. Series 5 PTO Shaft, 1-3/8-6 Spline Both Ends w/ Slip Clutch for Finish Mowers. 6 Spline on Both Ends: The Jeremywell Series 5 PTO has a standard size of 1-3/8 diameter and a 6-spline design on both the tractor and implement ends, providing a secure and reliable connection between the power take-off shaft and the corresponding implement, making it the perfect fit for powered farm equipment of the same size. It also has universal cross joints measuring 1.19in x 3.15in / 30.2mm x 80mm. Adjustable Length: Compressed Length: 43.3″/1100mm; Extended Overall Length: 57″/1447.8mm, Friction Disc Dia: 5.5. The Jeremywell PTO shaft is designed with a telescoping steel tube, a universal joint, and yokes, ensuring compatibility with a wide range of implements. Reference: T51100BIIIP5.05.05B5FFV1. Wide Application: Standard 1-3/8 inch diameter shaft ensures compatibility with a wide range of agricultural finish mowers, including models compatible with Land Pride, Bush Hog, Woods, Work Saver, John Deere, Befco, Caroni, First Choice, Rhino, LMC, Massey Ferguson, Kioti brands and more. Easy Assembly: Easily install this PTO shaft to your application by attaching the connecting ends to the corresponding tractor end and implement end, should you want to cut to your desired length please read manual for further instructions. Shielding for Your Protection: The Series 5 PTO shaft is equipped with 2 friction disc slip clutch that allows for rapid release to prevent damage to your valued applications, along with a plastic shield and security chain for a safe and danger-free process. Shop Categories Roller Chains. Helpful Links Add to Favorite Sellers. Wide Application: Having a standard 1-3/8 inch diameter shaft ensures compatibility with a wide range of agricultural finish mowers such as Land Pride, Bush Hog, Woods, Work Saver, John Deere, Befco, Caroni, First Choice, Rhino, LMC, Massey Ferguson, Kioti and More. The Series 5 PTO is designed for use with a wide range of agricultural equipment and machinery. It includes a friction clutch mechanism for added safety, allowing the PTO to slip in case of sudden loads or excessive torque. This PTO is equipped with a standard Series 4 telescoping shaft, universal joints, and yokes, ensuring compatibility with a wide range of implements. It has an extendable length of 43.3″-57″ and a 1-3/8 6-spline both on the tractor and the implement ends, ensuring a secure and efficient connection to your equipment. Its compact structure and protective features, such as a plastic shield and chain guard, make it reliable and efficient for transferring power from the tractor to various agricultural equipment. Shaft Diameter: 1-3/8 inches. Spline Count: 6 on both ends. Length: 43.3″ – 57″. Material: [Insert material information]. Compatibility: Land Pride, Bush Hog, Woods, Work Saver, John Deere, Befco, Caroni, First Choice, Rhino, LMC, Massey Ferguson, Kioti and More. Cross Joint: 1.19in x 3.15in / 30.2mm x 80mm. Series 4 PTO Shaft, 1-3/8? Is a leading firm in power transmission and mechanical products. We provide a variety of standard and special industrial chains, such as: Driving Chains, Conveyor Chains, Agricultural Chains, Leaf Chain, Stainless Steel Chains, Metallurgical Chains and many more! In addition, we also carry Power Transmission Parts, Agriculture & Garden Parts, Automotive Parts, and Tools, such as Pillow Block Bearings, Sprockets, Shaft Collars, Spindle Assemblies, Belts, Pulleys, Chainsaw Chains, Trailer Jacks, Go Kart Clutch, Drill Bit and many more! We keep all of our inventories in Orange County, CA to meet the needs of our customers. We provide quality products at fair prices, while striving to help our customers to become the leaders in their respective industries. We always adhere to the enterprise spirit of being practical, innovative, efficient, and excellent to satisfy all our customer’s needs. If you have any questions or would like further information regarding our products, please don’t hesitate to get in touch! The best way is to return you product and place an order for the correct part. View more great items!

]]> https://businessindustrialspline.org/series-5-pto-shaft-1-38-6-spline-both-ends-with-slip-clutch-for-finish-mowers-2/feed/ 0 https://businessindustrialspline.org/series-5-pto-shaft-1-38-6-spline-both-ends-with-slip-clutch-for-finish-mowers/ https://businessindustrialspline.org/series-5-pto-shaft-1-38-6-spline-both-ends-with-slip-clutch-for-finish-mowers/#comments Sun, 27 Apr 2025 21:36:45 +0000 https://businessindustrialspline.org/series-5-pto-shaft-1-38-6-spline-both-ends-with-slip-clutch-for-finish-mowers/








Motorcycle Chains & Sprockets. Car Racks and Tire Chains. Frequently Bought Together Kit. Add to Favorite Sellers. Sign up to Newsletter. Series 5 PTO Shaft, 1-3/8-6 Spline Both Ends w/ Slip Clutch for Finish Mowers. 6 Spline on Both Ends: The Jeremywell Series 5 PTO has a standard size of 1-3/8 diameter and a 6-spline design on both the tractor and implement ends, providing a secure and reliable connection between the power take-off shaft and the corresponding implement, making it the perfect fit for powered farm equipment of the same size. It also has universal cross joints measuring 1.19in x 3.15in / 30.2mm x 80mm. Adjustable Length: Compressed Length: 43.3″/1100mm; Extended Overall Length: 57″/1447.8mm, Friction Disc Dia: 5.5. The Jeremywell PTO shaft is designed with a telescoping steel tube, a universal joint, and yokes, ensuring compatibility with a wide range of implements. Reference: T51100BIIIP5.05.05B5FFV1. Wide Application: Having a standard 1-3/8 inch diameter shaft ensures compatibility with a wide range of agricultural finish mowers such as Land Pride, Bush Hog, Woods, Work Saver, John Deere, Befco, Caroni, First Choice, Rhino, LMC, Massey Ferguson, Kioti and More. Easy Assembly: Easily install this PTO shaft to your application by attaching the connecting ends to the corresponding tractor end and implement end, should you want to cut to your desired length please read manual for further instructions. Shielding for Your Protection: The Series 5 PTO shaft is equipped with 2 friction disc slip clutch that allows for rapid release to prevent damage to your valued applications, along with a plastic shield and security chain for a safe and danger-free process. The Series 5 PTO is designed for use with a wide range of agricultural equipment and machinery. It includes a friction clutch mechanism for added safety, allowing the PTO to slip in case of sudden loads or excessive torque. This PTO is equipped with a standard Series 4 telescoping shaft, universal joints, and yokes, ensuring compatibility with a wide range of implements. It has an extendable length of 43.3″-57″ and a 1-3/8 6-spline both on the tractor and the implement ends, ensuring a secure and efficient connection to your equipment. Its compact structure and protective features, such as a plastic shield and chain guard, make it reliable and efficient for transferring power from the tractor to various agricultural equipment. Shaft Diameter: 1-3/8 inches. Spline Count: 6 on both ends. Length: 43.3″ – 57″. Material: [Insert material information]. Compatibility: Land Pride, Bush Hog, Woods, Work Saver, John Deere, Befco, Caroni, First Choice, Rhino, LMC, Massey Ferguson, Kioti and More. Cross Joint: 1.19in x 3.15in / 30.2mm x 80mm. View more great items. #C2042HHP Heavy Duty Hollow Pin Roller Chain 10 Feet with 1 Connecting Link. Series 4 PTO Shaft, 1-3/8? 6 Spline Both Ends for Bush Hog Finish Mowers. 6 Spline Both Ends w/ Slip Clutch for Finish Mowers. #667H Pintle Chain 10 Feet with 1 Connecting Link. Is a leading firm in power transmission and mechanical products. We provide a variety of standard and special industrial chains, such as: Driving Chains, Conveyor Chains, Agricultural Chains, Leaf Chain, Stainless Steel Chains, Metallurgical Chains and many more! In addition, we also carry Power Transmission Parts, Agriculture & Garden Parts, Automotive Parts, and Tools, such as Pillow Block Bearings, Sprockets, Shaft Collars, Spindle Assemblies, Belts, Pulleys, Chainsaw Chains, Trailer Jacks, Go Kart Clutch, Drill Bit and many more! We keep all of our inventories in Orange County, CA to meet the needs of our customers. We provide quality products at fair prices, while striving to help our customers to become the leaders in their respective industries. We always adhere to the enterprise spirit of being practical, innovative, efficient, and excellent to satisfy all our customer’s needs. If you have any questions or would like further information regarding our products, please don’t hesitate to get in touch! The best way is to return you product and place an order for the correct part.

]]> https://businessindustrialspline.org/series-5-pto-shaft-1-38-6-spline-both-ends-with-slip-clutch-for-finish-mowers/feed/ 0 https://businessindustrialspline.org/34-tooth-18-spline-disc-mower-gear-pod-for-fort-morra-farmtrac-disc-mowers-3/ https://businessindustrialspline.org/34-tooth-18-spline-disc-mower-gear-pod-for-fort-morra-farmtrac-disc-mowers-3/#comments Sun, 08 Sep 2024 02:37:53 +0000 https://businessindustrialspline.org/34-tooth-18-spline-disc-mower-gear-pod-for-fort-morra-farmtrac-disc-mowers-3/






Disc Mower Gear Pod For Fort, Morra, Farmtrac, Long, First Choice, Yellow Jacket, MF22 Series disc mowers. Makes a great spare part to have on hand to minimize downtime. See my other listings for additional parts for these disc mowers.

]]> https://businessindustrialspline.org/34-tooth-18-spline-disc-mower-gear-pod-for-fort-morra-farmtrac-disc-mowers-3/feed/ 0 https://businessindustrialspline.org/34-tooth-18-spline-disc-mower-gear-pod-for-fort-morra-farmtrac-disc-mowers-2/ https://businessindustrialspline.org/34-tooth-18-spline-disc-mower-gear-pod-for-fort-morra-farmtrac-disc-mowers-2/#comments Fri, 17 Mar 2023 06:31:52 +0000 https://businessindustrialspline.org/34-tooth-18-spline-disc-mower-gear-pod-for-fort-morra-farmtrac-disc-mowers-2/






Disc Mower Gear Pod For Fort, Morra, Farmtrac, Long, First Choice, Yellow Jacket, MF22 Series disc mowers. Makes a great spare part to have on hand to minimize downtime. See my other listings for additional parts for these disc mowers. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment Parts & Accessories\Hardware Parts”. The seller is “cavecreek37148″ and is located in this country: US. This item can be shipped to United States.

• Part Type: Gear
• Brand: Panaroma

]]> https://businessindustrialspline.org/34-tooth-18-spline-disc-mower-gear-pod-for-fort-morra-farmtrac-disc-mowers-2/feed/ 0 https://businessindustrialspline.org/king-kutter-184000-replacement-gearbox-for-4-mowers-11-93-ratio-12-spline-2/ https://businessindustrialspline.org/king-kutter-184000-replacement-gearbox-for-4-mowers-11-93-ratio-12-spline-2/#comments Wed, 05 Oct 2022 10:34:05 +0000 https://businessindustrialspline.org/king-kutter-184000-replacement-gearbox-for-4-mowers-11-93-ratio-12-spline-2/













1:1.93 su(speed up) ratio drop-in replacement gearbox. Please Look at all pictures. One (1) Brand New Rotary Cutter Drop-in Replacement Gearbox. 1: 1.93 ratio SU (speed up) with. 1-3/8″ diameter with 1/2″ shear bolt hole smooth input shaft and. 1.57 inches (39.878 mm) diameter. Input shaft smooth 1 3/8″ diameter with ½” shear bolt hole. 1: 1.93 ratio SU (speed up). Output shaft 12 tapered splines. 1.5 inches diameter. 4 Bolt mounting pattern is 6-3/4 diagonally center to the center hole. 4-3/4″ or more precisely 4.773″ from center to the center hole adjacent. Standard rotation (clockwise in/ counterclockwise out). Includes castle nut and cotter pin and breather vent. Includes input shaft retaining ring. This gearbox may fit the following part number. Please message or call if additional information is needed before purchasing. Your complete satisfaction is important to us. All parts are guaranteed to meet with your approval! The use of their part numbers and or drawings are only used to aid AgriQualityPartsSupply customers in finding the correct replacement part. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment Attachments\Mowers, Mower Decks & Mower Conditioners”. The seller is “agriqualityparts.supply” and is located in this country: US. This item can be shipped to United States.

• MPN: 184000

]]> https://businessindustrialspline.org/king-kutter-184000-replacement-gearbox-for-4-mowers-11-93-ratio-12-spline-2/feed/ 0 https://businessindustrialspline.org/34-tooth-18-spline-disc-mower-gear-pod-for-fort-morra-farmtrac-disc-mowers/ https://businessindustrialspline.org/34-tooth-18-spline-disc-mower-gear-pod-for-fort-morra-farmtrac-disc-mowers/#comments Tue, 08 Mar 2022 19:39:17 +0000 https://businessindustrialspline.org/34-tooth-18-spline-disc-mower-gear-pod-for-fort-morra-farmtrac-disc-mowers/







Disc Mower Gear Pod For Fort, Morra, Farmtrac, Long, First Choice, Yellow Jacket, MF22 Series disc mowers. Rebuilt with new bearing. Makes a great spare part to have on hand to minimize downtime. See my other listings for additional parts for these disc mowers. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment Parts & Accessories\Hardware Parts”. The seller is “cavecreek37148″ and is located in this country: US. This item can be shipped to United States.

• Part Type: Gear
• Brand: Panaroma

]]> https://businessindustrialspline.org/34-tooth-18-spline-disc-mower-gear-pod-for-fort-morra-farmtrac-disc-mowers/feed/ 0 https://businessindustrialspline.org/new-pto-shaftdriveline-fits-most-all-finish-mowers-1-38-6-spline-on-both-ends/ https://businessindustrialspline.org/new-pto-shaftdriveline-fits-most-all-finish-mowers-1-38-6-spline-on-both-ends/#comments Wed, 25 Aug 2021 13:17:57 +0000 http://businessindustrialspline.org/new-pto-shaftdriveline-fits-most-all-finish-mowers-1-38-6-spline-on-both-ends/




New Replacement PTO shaft for Finish Mowers, Tillers, Spreaders, Hay Tedders and many more applications. PTO is a series 4, rated for 40HP it has 1-3/8″ 6 spline (Quick) thumb button on both ends for easy installment it has a complete safety shield, The PTO measures 41″ from end to end and has an 56 maximum extended length. These PTO shafts fit the following Finish Mowers. Bush Hog: ATH 600 and ATH 720, ATH 900, FTH 480, FTH 600, FTH 720, MTH 600, MTH 720 Series Mowers. Landpride: FDR1548, FDR1560, FDR1572, FDR1648, FDR1660, FDR1672, FDR2548, FDR2560, FDR2572, AT2660, AT2672 Series Mowers. Caroni TC480, TC590, TC710, TC910 with spline Input Shaft. Befco most late models with splined input shafts, early models had some with smooth input shaft. First Choice all Models. We also stock collar repair kits, thumb buttons & and spring collar kits. Personal check orders held 10 days or until check clears. Your complete satisfaction is important to us. The free listing tool. The item “NEW PTO Shaft/Driveline Fits Most all Finish Mowers 1-3/8 6 spline on both ends” is in sale since Monday, April 15, 2019. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment Parts & Accessories\Power Take Off Parts”. The seller is “dnequipmentparts” and is located in Mount Orab, Ohio. This item can be shipped to United States.

• MPN: TX4
• Brand: Grizzly

]]> https://businessindustrialspline.org/new-pto-shaftdriveline-fits-most-all-finish-mowers-1-38-6-spline-on-both-ends/feed/ 0 https://businessindustrialspline.org/king-kutter-184000-replacement-gearbox-for-4-mowers-11-93-ratio-12-spline/ https://businessindustrialspline.org/king-kutter-184000-replacement-gearbox-for-4-mowers-11-93-ratio-12-spline/#comments Sun, 24 Jan 2021 12:26:50 +0000 http://businessindustrialspline.org/king-kutter-184000-replacement-gearbox-for-4-mowers-11-93-ratio-12-spline/






New Replacement gearbox for 4′ King Kutter Mowers; Replaces Part Number 184000. 1 : 1.93 Ratio. 1 3/8″ Round Input Shaft with 1/2″ Shear Bolt Hole. 1-1/2 12 Tapered Spline Output Shaft. 4 Bolt Mount with 4-3/4 from bolt hole to bolt hole. DN Equipment stocks many replacement parts for the King Kutter Rotary Cutters. Please send us a message if you do not see what you are looking for. Please call before you come to verify items are in stock, we try to keep all advertised items in stock at all times. But we would hate to have you visit us and not have the item you are looking for when you get here! We now take Discover Card and American Express Too! Personal check orders held 10 days or until check clears. Your complete satisfaction is important to us. The free listing tool. The item “King Kutter 184000 Replacement Gearbox for 4′ Mowers 11.93 Ratio 12 Spline” is in sale since Wednesday, December 19, 2018. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment Attachments\Mowers, Mower Decks & Mower Conditioners”. The seller is “dnequipmentparts” and is located in Mount Orab, Ohio. This item can be shipped to United States, Canada, United Kingdom, China, Mexico, Germany, Japan, Brazil, France, Australia, Russian federation, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Austria, Bahamas, Israel, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.

• MPN: 184000

]]> https://businessindustrialspline.org/king-kutter-184000-replacement-gearbox-for-4-mowers-11-93-ratio-12-spline/feed/ 0 https://businessindustrialspline.org/34-tooth-18-spline-disc-mower-gear-pod-for-fort-morra-disc-mowers/ https://businessindustrialspline.org/34-tooth-18-spline-disc-mower-gear-pod-for-fort-morra-disc-mowers/#comments Wed, 02 Sep 2020 14:28:10 +0000 http://businessindustrialspline.org/34-tooth-18-spline-disc-mower-gear-pod-for-fort-morra-disc-mowers/






Disc Mower Gear Pod For Fort, Morra, Panorama, Long, First Choice, Yellow Jacket, MF22 Series disc mowers. Makes a great spare part to have on hand to minimize downtime. See my other listings for additional parts for these disc mowers. The item “34 Tooth / 18 Spline Disc Mower Gear Pod For Fort, Morra, Disc mowers” is in sale since Wednesday, August 12, 2020. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment Parts & Accessories\Hardware Parts”. The seller is “cavecreek37148″ and is located in Portland, Tennessee. This item can be shipped to United States.

• Part Type: Gear
• MPN: Does Not Apply
• Brand: Panaroma

]]> https://businessindustrialspline.org/34-tooth-18-spline-disc-mower-gear-pod-for-fort-morra-disc-mowers/feed/ 0