https://businessindustrialspline.org Thu, 30 Jul 2026 19:41:41 +0000 en-CA hourly 1 https://wordpress.org/?v=4.1.1 https://businessindustrialspline.org/dewalt-d25551k-120-v-corded-spline-rotary-hammer-concrete-masonry-chipper-nib/ https://businessindustrialspline.org/dewalt-d25551k-120-v-corded-spline-rotary-hammer-concrete-masonry-chipper-nib/#comments Fri, 15 Aug 2025 17:56:50 +0000 https://businessindustrialspline.org/dewalt-d25551k-120-v-corded-spline-rotary-hammer-concrete-masonry-chipper-nib/




















New Dewalt D25551K 120 V Corded Spline Rotary Hammer Concrete Masonry Chipper, Brand new tool in case with instructions, came from a DWP jobsite, they etch every tool, this has etchings as shown. What Is the DeWalt D25551K? The D25551K is a shop-grade, 120 V corded spline rotary hammer designed for demanding drilling and chipping tasks in concrete and masonry. Chuck type : Spline drive. Max drilling diameter : 1-9/16 inches (40 mm). Motor : 11-12 A (sources vary slightly); it delivers around 7.3 ft-lb (? 9.9 J) of impact energy. Weight & Size : Approximately 14-14.5 lb, 18-18.5 inches in length. Features : Integrated clutch for safety, 360° side handle, depth rod, included heavy-duty case/kit box. Corded spline rotary hammer. 120 V corded, 11-12 A. 1-9/16 in concrete drilling capability. 7.3 ft-lb (9.9 J). 14-14.5 lb; 18-18.5 in long. Clutch, vibration-reducing handle, depth rod, kit box.

]]> https://businessindustrialspline.org/dewalt-d25551k-120-v-corded-spline-rotary-hammer-concrete-masonry-chipper-nib/feed/ 0 https://businessindustrialspline.org/jf-oakes-008-spl-012-24-12-x-24-sheffield-spline-masonry-drill-bit/ https://businessindustrialspline.org/jf-oakes-008-spl-012-24-12-x-24-sheffield-spline-masonry-drill-bit/#comments Fri, 04 Jul 2025 16:11:43 +0000 https://businessindustrialspline.org/jf-oakes-008-spl-012-24-12-x-24-sheffield-spline-masonry-drill-bit/




P/N 008-SPL-012-24 Type – 1/2″ x 24″ Sheffield Carbide Tipped Spline Masonry Drill Bit Size – 1/2. Shank Dia – Spline. Flute Length – 18. Material – Carbide Tipped. Powered by SixBit’s eCommerce Solution.

]]> https://businessindustrialspline.org/jf-oakes-008-spl-012-24-12-x-24-sheffield-spline-masonry-drill-bit/feed/ 0 https://businessindustrialspline.org/bosch-hc4032-hammer-masonry-drill-34in-carbide/ https://businessindustrialspline.org/bosch-hc4032-hammer-masonry-drill-34in-carbide/#comments Sat, 20 Apr 2024 22:44:58 +0000 https://businessindustrialspline.org/bosch-hc4032-hammer-masonry-drill-34in-carbide/



Hammer Masonry Drill, 3/4in, Carbide. Rotary Hammer Drill, Spline, 3/4 in, Carbide, 21 in Overall Length, Maximum Drilling Depth 16 in, Shank Diameter 3/4 in, Bright (Uncoated). This Speed-X(TM) spline hammer drill bit is ideal for concrete and masonry drilling. It features carbide and diffusion bonding technology to help provide superior performance and durability in precision anchoring and drilling applications. ¢ Tungsten-carbide tip provides superior wear resistance in tough applications⢠Active-centering tip for optimum guidance when drilling in concrete and reinforced concrete⢠Large flute volume for fast drilling, dust transport and less clogging⢠Narrow flute back for reduced friction between bit and material. Grainger Part #:4XD87. Add to Favorite Sellers. Sign up to Newsletter. View more great items. GRAINGER APPROVED O1D1166 Oil Hard Drill Rod, O1,1/16,0.0625 In PK 10. ZSI 024M028 2HoleCushionedClampTubeS11/2InL3 15/64In PK 10. AMERICAN BEAUTY HS-A AMERICAN BEAUTY Heat Sink Clip PK 6. KEO 53128-TIN Countersink, 82 deg. 1/2 Body PK 6. These items are intended to be used in North America. Power adapters and other modifications may be necessary for proper operation in other countries. GRAINGER STANDARD TERMS AND CONDITIONS. Please read these terms and conditions carefully. They contain important information concerning customer? Legal rights, warranties, obligations and available dispute resolutions remedies. They also provide that if Grainger is unable to resolve any matter to Customer? S satisfaction, Customer will exclusively use arbitration to decide the dispute and Customer will bring its claim solely on an individual basis and not in a class action or representative proceeding. Grainger reserves the right to revise these Terms and Conditions at any time. Product Compliance and Suitability. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose. Certain products may not be available for sale in all areas. Grainger does not guarantee compliance or suitability of the products it sells with any laws, codes or regulations, nor does Grainger accept responsibility for construction, installation and/or use of a product. It is Customer’s responsibility to review the product application and all applicable laws, codes and regulations for each relevant jurisdiction to be sure that the construction, installation, and/or use involving the products are compliant. S acceptance of any order is subject to Customer? S assent to all of the terms and conditions set forth herein. Customer’s assent to these terms and conditions shall be presumed from Customer’s receipt of Grainger? S acknowledgment, or from Customer? S acceptance of all or any part of the products ordered. No additions or modifications of Grainger? S terms and conditions by Customer shall be binding upon Grainger, unless agreed to in writing by an authorized representative of Grainger. Grainger reserves the right to accept or reject any order. The terms and conditions in: (i) Grainger? S forms; (ii) acknowledgments; (iii) quotations; (iv) invoices; (v) web sites; (vi) catalogs; and (vii) extension of credit are incorporated herein by reference, and constitute the entire and exclusive agreement between Customer and Grainger. Business Customers hereby agree to indemnify and hold Grainger harmless against any breach of this representation. ADDITIONAL TERMS AND CONDITIONS RELATED TO EXPORT OF GRAINGER PRODUCTS. IN ADDITION TO THE STANDARD TERMS AND CONDITIONS IN SECTION I, EXPORT SALES OF GRAINGER PRODUCTS WILL BE GOVERNED BY THE FOLLOWING ADDITIONAL TERMS AND CONDITIONS RELATED TO EXPORT OF GRAINGER PRODUCTS? IN THE EVENT OF A CONFLICT BETWEEN GRAINGER? S STANDARD TERMS AND CONDITIONS IN SECTION I AND THE ADDITIONAL EXPORT TERMS IN SECTION III, THE ADDITIONAL TERMS IN SECTION III SHALL PREVAIL FOR EXPORT SALES OF GRAINGER PRODUCTS. Customer acknowledges that no order shall be deemed accepted unless and until it is verified and accepted by Grainger, or any of its U. Affiliates and divisions, at a continental U. Facility or at any of its websites. Customer further consents that submission of its order shall subject Customer to the jurisdiction of the federal courts of the U. And of the State where acceptance occurred in the U. Grainger is required to charge U. Export Controls and Related Regulations. Customer represents and warrants that it is not designated on, or associated with, any party designated on any of the U. Government restricted parties lists, including without limitation, the U. Commerce Department Bureau of Industry and Security? Denied Persons List; Entity List or Unverified List; the U. Treasury Department Office of Foreign Assets Control? Specially Designated Nationals and Blocked Persons List; or the U. State Department Directorate of Defense Trade Controls? Customer shall comply with all applicable U. Economic sanctions and export control laws and regulations, including without limitation, the regulations administered by OFAC, the Export Administration Regulations? Administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. It is specifically agreed that Customer shall be the foreign principal party in interest? In the event a license is required for export from the U. Agent of the FPPI the exporter of record for purposes of meeting EAR requirements. Country of Importation and Anti-diversion. Customer represents that it is purchasing products from the U. And importing them to the country for the use of the ultimate consignee specified in the Customer and Grainger documentation. Customer agrees that the products will not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U. Government or as otherwise authorized by U. Any commodities, technology and software will be exported from the U. In accordance with the U. Export Administration Regulations and other applicable laws or regulations. Diversion contrary to U. Customer further agrees to inform Grainger at the time of order of any North American Free Trade Agreement or other special documentation, packaging or product marking or labeling, but Grainger shall not be responsible for providing any such documentation, packaging, marking or labeling other than such documents that are necessary under U. Export laws and regulations for export, unless Grainger expressly agrees to do so. Permits, Export, and Import Licenses. Customer shall be responsible for obtaining any licenses or other official authorizations that may be required by the country of importation. When the Customer is designated as the U. Principal Party of Interest, the Customer shall be responsible for obtaining licenses under the EAR, International Traffic in Arms Regulations, Toxic Substances Control Act, or other applicable laws or regulations. If the Customer is the FPPI, then the terms contained in subsection 6 of this Section III shall apply. The rights and obligations of the parties under these terms and conditions shall not be governed by the provisions of the 1980 United Nations Convention of Contracts for the International Sale of Goods or the United Nations Convention on the Limitation Period in the International Sale of Goods. Rather, these terms and conditions shall be governed by the laws of the State of Illinois, U. Including its provisions of the Uniform Commercial Code, but excluding its conflict of law rules.

]]> https://businessindustrialspline.org/bosch-hc4032-hammer-masonry-drill-34in-carbide/feed/ 0 https://businessindustrialspline.org/spline-adapter-for-hammer-drill-with-core-bit-for-masonry-reinforced-concrete/ https://businessindustrialspline.org/spline-adapter-for-hammer-drill-with-core-bit-for-masonry-reinforced-concrete/#comments Fri, 11 Nov 2022 17:41:44 +0000 https://businessindustrialspline.org/spline-adapter-for-hammer-drill-with-core-bit-for-masonry-reinforced-concrete/












Some sizes may be solid barrel or with slits. Order includes safety glasses. PROFESSIONAL LASER WELDED TURBO SEGMENTED DRY CORE BIT WITH SPLINE ADAPTER AND CENTER GUIDE. THIS CORE BIT IS MANUFACTURED FOR DRILLING MASONRY, CURED & REINFORCED CONCRETE WITH MEDIUM TO HARD AGGREGATES & MEDIUM STEEL REINFORCING. THE 12MM TURBO SEGMENTS HAVE THE HIGHEST DIAMOND PARTICLES PER SEGMENT IN THE INDUSTRY. THE NOTCH GROOVE IN SEGMENTS ARE DESIGNED IN AIDING WITH STEEL AGGREGATES IN CONCRETE.. Industrial barrel is manufactured with 1/8” a part grooves for quicker extraction from material. Laser welded segments overlap barrel for longer life. Industrial grooved segment bodies are laser welded on both sides, inner and outer to barrel. V- Style segments are manufactured for entering material quickly and minimizing kick back or bounce. 1”, 1 1/4”, 1 1/2”, 1 3/4”, 2”, 2 1/4”, 2 1/2”, 3”, 3 1/4”, 3 1/2”, 4”, 4 1/4”, 4 1/2”, 5”, 6′. SEGMENT MOLD: GROOVED TURBO SEGMENT STYLE. MATRIX HARDNESS: SOFT BOND FOR HARD MATERIALS WITH STEEL REINFORCING. BOND TO CORE: INNER/OUTER DOUBLE LASER WELD. INSTRUCTIONS FOR CENTER GUIDE USE: (1) ATTACH CENTER GUIDE TO ADAPTER BY PUSHING IT INTO HOLE. THE HEAT EXPANDS THE METAL IN THE CENTER GUIDE AND WILL HOLD IN PLACE TO START HOLE (2) THREAD ON TO DRILL (3) SCREW DRY CORE BIT OVER ADAPTER (4) PENETRATE MATERIAL ABOUT 3/4″ TO 1 ½” (PASS THE LASER WELDED SEGMENTS) (5) REMOVE TWIST BIT (WILL COME OUT WITH PLIERS, MONKEY WRENCH OR SCREW DRIVER INSIDE ADAPTER HOLE) (6) CONTINUE DRILLING USING THE BARREL AS NEW GUIDE, DO NOT CORE WITH CENTER GUIDE IN BARREL. This item is in the category “Home & Garden\Home Improvement\Building & Hardware\Flooring & Tiles\Other Flooring & Tiles”. The seller is “fc727″ and is located in this country: US. This item can be shipped worldwide.

• diameter: 3 1/2” (3.5\
• Type: core drilling
• Brand: Pro Right Industry

]]> https://businessindustrialspline.org/spline-adapter-for-hammer-drill-with-core-bit-for-masonry-reinforced-concrete/feed/ 0 https://businessindustrialspline.org/6-dry-core-bit-for-re-enforced-concrete-masonry-withadapter-center-guide/ https://businessindustrialspline.org/6-dry-core-bit-for-re-enforced-concrete-masonry-withadapter-center-guide/#comments Sun, 03 Jul 2022 01:10:26 +0000 https://businessindustrialspline.org/6-dry-core-bit-for-re-enforced-concrete-masonry-withadapter-center-guide/













6 Laser welded Turbo rim segmented dry core bit. Equivalent to major brands without being a member. Signing up for discounts? Industrial Segments manufactured for following Applications. High PSI Paver Brick with High Alumina & refractory bricks. Dense Materials such as Bluestone, Flagstone. Cured concrete with imbedded rebar/wire mesh. Please carefully read other brands description were. “Not for hard materials or with any steel”. Barrel may be solid or with slits. Fields of interest based on size. Infant fence install, HVAC, Running cable wire, range vent hoods. Garage fire sprinkler install, fence post on concrete slabs. Installing a radon mitigation system. Includes 1 of any of the following adapters with a. Center guide (pilot bit). Handheld core drill or core rig adapter 1 1/4”7”th. Female to 5/8” male. Angle grinder adapter with center guide (pilot bit). Hilti 3 slot to 5/8” thread adapter with center guide. Fits: Hilti DD100, DCM130, DD200 with Bl Connection. And for use on core bits with 5/8-11 Male end. Hilti 6 slot to 5/8” thread adapter with center guide. Fits: Hilti style BI+ QD 6-Slot end. Fits DD 110-D, 110-W, 120, 130, 150U, 160 drills. SDS plus Hammer drill adapter to 5/8 thread with. SDS MAX Hammer drill adapter to 5/8 thread with. Spline Hammer drill adapter to 5/8 thread with. SEGMENT MOLD: GROOVED TURBO SEGMENT STYLE. MATRIX HARDNESS: SOFT BOND FOR HARD MATERIALS. BOND TO CORE: INNER/OUTER DOUBLE LASER WELD. This item is in the category “Home & Garden\Home Improvement\Building & Hardware\Flooring & Tiles\Other Flooring & Tiles”. The seller is “fc727″ and is located in this country: US. This item can be shipped worldwide.

• 6\: spline adapter to 5/8\
• Type: dry core bit
• Brand: pro right industry

]]> https://businessindustrialspline.org/6-dry-core-bit-for-re-enforced-concrete-masonry-withadapter-center-guide/feed/ 0 https://businessindustrialspline.org/4-12-dry-core-bit-for-re-enforced-concrete-masonry-withadapter-center-guide/ https://businessindustrialspline.org/4-12-dry-core-bit-for-re-enforced-concrete-masonry-withadapter-center-guide/#comments Tue, 26 Apr 2022 00:35:08 +0000 https://businessindustrialspline.org/4-12-dry-core-bit-for-re-enforced-concrete-masonry-withadapter-center-guide/













4 1/2 Laser welded Turbo rim segmented dry core bit. Equivalent to major brands without being a member. Signing up for discounts? Industrial Segments manufactured for following Applications. High PSI Paver Brick with High Alumina & refractory bricks. Dense Materials such as Bluestone, Flagstone. Cured concrete with imbedded rebar/wire mesh. Please carefully read other brands description were. “Not for hard materials or with any steel”. Barrel may be solid or with slits. Fields of interest based on size. Infant fence install, HVAC, Running cable wire, range vent hoods. Garage fire sprinkler install, fence post on concrete slabs. Installing a radon mitigation system. Includes 1 of any of the following adapters with a. Center guide (pilot bit). Handheld core drill or core rig adapter 1 1/4”7”th. Female to 5/8” male. Angle grinder adapter with center guide (pilot bit). Hilti 3 slot to 5/8” thread adapter with center guide. Fits: Hilti DD100, DCM130, DD200 with Bl Connection. And for use on core bits with 5/8-11 Male end. Hilti 6 slot to 5/8” thread adapter with center guide. Fits: Hilti style BI+ QD 6-Slot end. Fits DD 110-D, 110-W, 120, 130, 150U, 160 drills. SDS plus Hammer drill adapter to 5/8 thread with. SDS MAX Hammer drill adapter to 5/8 thread with. Spline Hammer drill adapter to 5/8 thread with. SEGMENT MOLD: GROOVED TURBO SEGMENT STYLE. MATRIX HARDNESS: SOFT BOND FOR HARD MATERIALS. BOND TO CORE: INNER/OUTER DOUBLE LASER WELD. This item is in the category “Home & Garden\Home Improvement\Building & Hardware\Flooring & Tiles\Other Flooring & Tiles”. The seller is “fc727″ and is located in this country: US. This item can be shipped worldwide.

• 4 1/2\: spline adapter to 5/8\
• Type: dry core bit
• Brand: pro right industry

]]> https://businessindustrialspline.org/4-12-dry-core-bit-for-re-enforced-concrete-masonry-withadapter-center-guide/feed/ 0 https://businessindustrialspline.org/4-5-dry-core-bit-for-re-enforced-concrete-masonry-withadapter-center-guide/ https://businessindustrialspline.org/4-5-dry-core-bit-for-re-enforced-concrete-masonry-withadapter-center-guide/#comments Mon, 25 Apr 2022 12:32:20 +0000 https://businessindustrialspline.org/4-5-dry-core-bit-for-re-enforced-concrete-masonry-withadapter-center-guide/













4.5 Laser welded Turbo rim segmented dry core bit. Equivalent to major brands without being a member. Signing up for discounts? Industrial Segments manufactured for following Applications. High PSI Paver Brick with High Alumina & refractory bricks. Dense Materials such as Bluestone, Flagstone. Cured concrete with imbedded rebar/wire mesh. Please carefully read other brands description were. “Not for hard materials or with any steel”. Barrel may be solid or with slits. Fields of interest based on size. Infant fence install, HVAC, Running cable wire, range vent hoods. Garage fire sprinkler install, fence post on concrete slabs. Installing a radon mitigation system. Includes 1 of any of the following adapters with a. Center guide (pilot bit). Handheld core drill or core rig adapter 1 1/4”7”th. Female to 5/8” male. Angle grinder adapter with center guide (pilot bit). Hilti 3 slot to 5/8” thread adapter with center guide. Fits: Hilti DD100, DCM130, DD200 with Bl Connection. And for use on core bits with 5/8-11 Male end. Hilti 6 slot to 5/8” thread adapter with center guide. Fits: Hilti style BI+ QD 6-Slot end. Fits DD 110-D, 110-W, 120, 130, 150U, 160 drills. SDS plus Hammer drill adapter to 5/8 thread with. SDS MAX Hammer drill adapter to 5/8 thread with. Spline Hammer drill adapter to 5/8 thread with. SEGMENT MOLD: GROOVED TURBO SEGMENT STYLE. MATRIX HARDNESS: SOFT BOND FOR HARD MATERIALS. BOND TO CORE: INNER/OUTER DOUBLE LASER WELD. This item is in the category “Home & Garden\Home Improvement\Building & Hardware\Flooring & Tiles\Other Flooring & Tiles”. The seller is “fc727″ and is located in this country: US. This item can be shipped worldwide.

• 1”: 4.5\
• Type: dry core bit
• Brand: pro right industry

]]> https://businessindustrialspline.org/4-5-dry-core-bit-for-re-enforced-concrete-masonry-withadapter-center-guide/feed/ 0 https://businessindustrialspline.org/makita-711224-a-2-x-17-x-22-carbide-tipped-spline-shank-masonry-bit-germany/ https://businessindustrialspline.org/makita-711224-a-2-x-17-x-22-carbide-tipped-spline-shank-masonry-bit-germany/#comments Tue, 28 Dec 2021 17:17:28 +0000 https://businessindustrialspline.org/makita-711224-a-2-x-17-x-22-carbide-tipped-spline-shank-masonry-bit-germany/



Size -2″ x 17″ x 22 Material – Carbide Tipped Type – Spline Shank Made in Germany. Powered by SixBit’s eCommerce Solution. The item “Makita 711224-A, 2 x 17 x 22 Carbide Tipped Spline Shank Masonry Bit, Germany” is in sale since Friday, July 12, 2019. This item is in the category “Business & Industrial\Light Equipment & Tools\Drills & Hammers\Bits, Chisels & Breaker Points”. The seller is “fwoods1951″ and is located in Chillicothe, Missouri. This item can be shipped worldwide.

• Brand: Makita
• Model: Masonry Bit
• MPN: 711224-A
• Country/Region of Manufacture: Germany
• Material: Carbide Tipped
• Type: Spline Shank
• Custom 1: 2″
• UPC: Does Not Apply

]]> https://businessindustrialspline.org/makita-711224-a-2-x-17-x-22-carbide-tipped-spline-shank-masonry-bit-germany/feed/ 0 https://businessindustrialspline.org/makita-rotary-hammer-drill-concrete-masonry-1-916-in-corded-spline-side-handle/ https://businessindustrialspline.org/makita-rotary-hammer-drill-concrete-masonry-1-916-in-corded-spline-side-handle/#comments Sun, 05 Dec 2021 01:38:59 +0000 https://businessindustrialspline.org/makita-rotary-hammer-drill-concrete-masonry-1-916-in-corded-spline-side-handle/











Makita Rotary Hammer Drill Concrete/ Masonry 1-9/16 in Corded Spline Side Handle. Powerful 12.0 Amp motor delivers 6.8 ft. Torque limiter prevents damage by disengaging gears if bit binds. Sequential impact timing for up to 50% faster drilling. The makita 1-9/16 in. Spline rotary hammer features a powerful 12 amp motor engineered with field-core interlocking steel laminations, a dual ball-bearing armature and a large-surface commentator for an efficient transfer of power. The hr4041c delivers up to 230 – 460 rpm and 1,300 – 2,600 bpm and has 2 modes for “hammering only” and “hammering with rotation”. Soft-start functionality facilitates control and improved accuracy, while sequential impact timing promotes faster work. Chuck Size: 2 In. Drill/ Driver Type: Rotary Drill. Tools Product Type: Power Tool. Maximum Speed (RPM): 460 RPM. Power Tool Features: Variable Speed. Certifications and Listings: UL Listed. These products are manufactured according to the specifications of the US Electrical Standards and codes and voltage. Please note the Use with a converter or other voltage transforming device is AT YOUR OWN RISK. Customer service is our top priority! Please be sure to read the description thoroughly to make sure that this is the item you want before making a purchasing decision. We make every effort possible to accurately describe and depict the items. Please be aware that slight variations in color may be due to differences in lighting and computer monitor resolutions. Thank you for shopping with us. We appreciate your business! If ordering electrical items outside of the U. Please note that they will come equipped with a standard U. You will need a suitable adapter to use the item in your country. An adult signature will be required. Please be sure to have available help on hand to assist you with moving the item to the desired location in or outside of your home. When returning an item, it must be in all of the original packaging and include all of the original accessories or items that came with it. The item and package should be in original and perfect condition. We do our best to process as quickly as possible. Orders are processed immediately and dispatched to fulfillment as soon as they are received. For this reason, we are typically unable to honor cancellation requests. If the order has gone too far through the fulfillment process, we will be unable to cancel. Listed by Sku Fetch. The item “Makita Rotary Hammer Drill Concrete/ Masonry 1-9/16 in Corded Spline Side Handle” is in sale since Sunday, September 26, 2021. This item is in the category “Business & Industrial\Light Equipment & Tools\Drills & Hammers\Hammer Drills”. The seller is “pfcwills” and is located in Flushing, New York. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.

• UPC: 0088381081191
• EAN: 0088381081191
• MPN: HR4041C
• Brand: Makita
• Model: HR4041C

]]> https://businessindustrialspline.org/makita-rotary-hammer-drill-concrete-masonry-1-916-in-corded-spline-side-handle/feed/ 0 https://businessindustrialspline.org/4-spline-masonry-concrete-core-drill-bits-for-hammer-drilling-35-long/ https://businessindustrialspline.org/4-spline-masonry-concrete-core-drill-bits-for-hammer-drilling-35-long/#comments Tue, 23 Nov 2021 10:25:09 +0000 http://businessindustrialspline.org/4-spline-masonry-concrete-core-drill-bits-for-hammer-drilling-35-long/




4 spline masonry concrete core Drill Bits for hammer drilling. 1 1/8″ – 39″ long. 1 1/4″ – 35″ long. 1 3/8″ – 35″ long. 1 1/2″ – 35″ long cross tip. The item “4 spline masonry concrete core Drill Bits for hammer drilling 35 long” is in sale since Friday, March 5, 2021. This item is in the category “Business & Industrial\Light Equipment & Tools\Drills & Hammers\Core Drills & Rigs”. The seller is “ionic_uvc_germicidal_air_purifiers” and is located in Hamilton, Ontario. This item can be shipped to Canada, United States.

• Country/Region of Manufacture: China
• MPN: Does Not Apply
• Brand: Unbranded/Generic

]]> https://businessindustrialspline.org/4-spline-masonry-concrete-core-drill-bits-for-hammer-drilling-35-long/feed/ 0