https://businessindustrialspline.org Sun, 09 Aug 2026 08:05:44 +0000 en-CA hourly 1 https://wordpress.org/?v=4.1.1 https://businessindustrialspline.org/two-section-hydraulic-gear-pump-pgp51088g3lp-for-agt-skid-steer-loader-ktt23-new-3/ https://businessindustrialspline.org/two-section-hydraulic-gear-pump-pgp51088g3lp-for-agt-skid-steer-loader-ktt23-new-3/#comments Fri, 07 Aug 2026 08:01:46 +0000 https://businessindustrialspline.org/two-section-hydraulic-gear-pump-pgp51088g3lp-for-agt-skid-steer-loader-ktt23-new-3/

















Two-Section Hydraulic Gear Pump PGP51088G3LP For AGT Skid Steer Loader KTT23 New. Dual-Chamber Design: Independent circuits for main drive and auxiliary hydraulics. Dual Suction & Dual Feed: Ensures consistent flow and pressure for both systems. High-Strength Cast Housing: Durable construction built for high-duty applications. Simultaneous Operation: Run drive and attachment hydraulics together with no power loss. Precise Flow Control: Optimized for smooth and efficient hydraulic performance. Pump Type: Dual-chamber hydraulic gear pump. Mounting: 5/8 9-spline A2 mount. Main Inlet Port: Dedicated to drive system. Auxiliary Inlet Port: Dedicated to hydraulic attachments. Flow Capacity: Approximately 6-12 GPM. Operating Pressure: Up to 3,000 PSI (21 MPa). Material: High-strength cast housing. OEM / OE Part Number: PGP51088G3LP. Compatible With: Skid Steer Loader KTT23 and similar models. Use Case: Direct replacement for worn or damaged original pumps. 1 × Hydraulic Pump (as pictured). 100% Functional & Tested. Original Standard Design. High-Quality Materials for Maximum Durability. Engineered for Long Service Life in Demanding Conditions.

]]> https://businessindustrialspline.org/two-section-hydraulic-gear-pump-pgp51088g3lp-for-agt-skid-steer-loader-ktt23-new-3/feed/ 0 https://businessindustrialspline.org/11-47-ratio-gear-box-with-1-38-21-spline-input-shaft-replacement-for-bush-hog/ https://businessindustrialspline.org/11-47-ratio-gear-box-with-1-38-21-spline-input-shaft-replacement-for-bush-hog/#comments Mon, 03 Aug 2026 19:53:44 +0000 https://businessindustrialspline.org/11-47-ratio-gear-box-with-1-38-21-spline-input-shaft-replacement-for-bush-hog/













Please provide the VIN of the car so that we can check if it is suitable for you!! OE Number. This Gearbox is a 1:1.47 Speed up Ratio, with 1-3/8″-21 Spline input shaft, and 2″ 15 Spline Tapered Output Shaft. Replacement For Bush Hog 2510 Model Side Gearbox. Item Length 16.9 in Item Width 13.2 in Item Height 10.0 in Weight 63.6 lbs Brand Unbranded UPC Does not apply Type Auto parts. Please provide the VIN of the car so that we can check if it is suitable for you!! Compatibility Replacement For Bush Hog 2510 Model Side Gearbox. If an unit is received defective, of course we take it back or replace it. If the unit is received as expected, we must charge for our expenses if you want to send it back. Thank you for visiting my store! Our warehouses are located in many regions around the United States. Prioritize the best quality logistics solutions to transport packages. At the same time. Have any after-sales problems. Left Driver Power Liftgate Actuator Hatch fit for GMC Terrain 10-15 SUV 23432304. Power Steering Pump w/Pulley fit for Toyota Corolla Matrix fit for Pontiac Vibe. Women’s Secret Bottle-Vaginal Probiotics for Women pH Balance Health Supplement. Passenger Side Mirror Glass Heated Convex fit for Dodge Ram 1500 2019-22 684020. Rear Driveshaft Center Bearing + U Joint Kit fit for Ford F250 F350 Super Duty. 1x Rear Left Electric Window Regulator fit for 98-03 Dodge Durango 00-04 Dakota.

]]> https://businessindustrialspline.org/11-47-ratio-gear-box-with-1-38-21-spline-input-shaft-replacement-for-bush-hog/feed/ 0 https://businessindustrialspline.org/oem-3-section-hydraulic-gear-pump-triple-stage-tandem-pump-splined-shaft-heavy-e/ https://businessindustrialspline.org/oem-3-section-hydraulic-gear-pump-triple-stage-tandem-pump-splined-shaft-heavy-e/#comments Sun, 02 Aug 2026 19:50:43 +0000 https://businessindustrialspline.org/oem-3-section-hydraulic-gear-pump-triple-stage-tandem-pump-splined-shaft-heavy-e/







New surplus OEM 3-section hydraulic gear pump. Triple section gear pump. Ports capped from factory. New unused surplus condition. Please verify fitment using the stamped numbers and photos before purchasing.

]]> https://businessindustrialspline.org/oem-3-section-hydraulic-gear-pump-triple-stage-tandem-pump-splined-shaft-heavy-e/feed/ 0 https://businessindustrialspline.org/ash-gear-kff30-20-6-da30-2040-dp-6-teeth-30-involute-spline-shaper-cutter/ https://businessindustrialspline.org/ash-gear-kff30-20-6-da30-2040-dp-6-teeth-30-involute-spline-shaper-cutter/#comments Thu, 30 Jul 2026 07:40:44 +0000 https://businessindustrialspline.org/ash-gear-kff30-20-6-da30-2040-dp-6-teeth-30-involute-spline-shaper-cutter/









Ash Gear KFF30-20-6-DA30 20/40 DP 6-Teeth 30° Involute Spline Shaper Cutter. Check out my feedback! Tracking is provided on ALL Orders.

]]> https://businessindustrialspline.org/ash-gear-kff30-20-6-da30-2040-dp-6-teeth-30-involute-spline-shaper-cutter/feed/ 0 https://businessindustrialspline.org/gm-transfer-case-metal-gear-sprocket-splined-hub-19258134/ https://businessindustrialspline.org/gm-transfer-case-metal-gear-sprocket-splined-hub-19258134/#comments Sat, 18 Jul 2026 19:08:22 +0000 https://businessindustrialspline.org/gm-transfer-case-metal-gear-sprocket-splined-hub-19258134/








Industrial metal gear sprocket with a splined hub. Based on item and box, it appears to be a GM transfer case sprocket 19258134. This component features precisely machined teeth for efficient power transmission. Ideal for use in machinery, automotive systems, or industrial equipment requiring robust gear engagement. Suitable for repair projects or as a replacement part in mechanical assemblies. Unknown whether it has ever been used.

]]> https://businessindustrialspline.org/gm-transfer-case-metal-gear-sprocket-splined-hub-19258134/feed/ 0 https://businessindustrialspline.org/spur-gear-61-teeth-15-25od-2-738-bore-6-spline-20-degree-2-50-face-f5s4-4/ https://businessindustrialspline.org/spur-gear-61-teeth-15-25od-2-738-bore-6-spline-20-degree-2-50-face-f5s4-4/#comments Fri, 26 Jun 2026 05:52:43 +0000 https://businessindustrialspline.org/spur-gear-61-teeth-15-25od-2-738-bore-6-spline-20-degree-2-50-face-f5s4-4/






Spur Gear 61 Teeth, 15.25″OD, 2.738″ Bore 6 Spline, 20 Degree, 2.50 Face. MATERIAL DOCUMENT AND CLASSIFICATION. QQ-S-681 FED SPEC SINGLE MATERIAL RESPONSE OVERALL. STEEL COMP 150-125 OVERALL. 3.880 INCHES SECOND END. 3.880 INCHES FIRST END. 2.738 INCHES BOTH ENDS. NOMINAL DISTANCE BETWEEN BODY FACE AND RECESSED HUB END. 0.002 INCHES SECOND END. 0.002 INCHES FIRST END. 45.0 ROCKWELL C MINIMUM TEETH AND 55.0 ROCKWELL C MAXIMUM TEETH. STRAIGHT SPLINE BOTH ENDS. 15.2500 INCHES NOMINAL. WEBBED, WITH LIGHTENING HOLES. You are welcome to physically inspect this item. We are located in a Northwest Suburb of Detroit Michigan.

]]> https://businessindustrialspline.org/spur-gear-61-teeth-15-25od-2-738-bore-6-spline-20-degree-2-50-face-f5s4-4/feed/ 0 https://businessindustrialspline.org/spline-gear-spindle-pulley-hub-for-vari-speed-bridgeport-mill-used/ https://businessindustrialspline.org/spline-gear-spindle-pulley-hub-for-vari-speed-bridgeport-mill-used/#comments Thu, 11 Jun 2026 05:13:45 +0000 https://businessindustrialspline.org/spline-gear-spindle-pulley-hub-for-vari-speed-bridgeport-mill-used/











Spline Gear Spindle Pulley Hub for 1 1/2 HP Vari Speed Bridgeport MIll USED. IMPORTANT PLEASE READ BEFORE PURCHASING. We do not guarantee functionality and make no claims regarding operation performance completeness or suitability for any specific purpose. Due to our lack of expertise and the wide variety of items we sell we cannot determine whether this item is fully or partially operational. Due to our lack of expertise the item title and written description may be inaccurate. All information provided is based on visual inspection only and should not be relied upon as definitive. All photos are considered part of the description. Please review all pictures carefully as they show the exact item you will receive and represent its condition more accurately than any written description. Any wear damage, missing components modifications or defects whether visible or not should be assumed. The item may be incomplete or non functional. Please ask all questions before purchasing. We are happy to provide additional photos or clarify details to the best of our ability. Thank you for your understanding and for taking the time to review the listing.

]]> https://businessindustrialspline.org/spline-gear-spindle-pulley-hub-for-vari-speed-bridgeport-mill-used/feed/ 0 https://businessindustrialspline.org/eaton-26003-rzk-hydraulic-gear-pump-splined-shaft-2-bolt-flange-nos-oem/ https://businessindustrialspline.org/eaton-26003-rzk-hydraulic-gear-pump-splined-shaft-2-bolt-flange-nos-oem/#comments Wed, 10 Jun 2026 05:11:49 +0000 https://businessindustrialspline.org/eaton-26003-rzk-hydraulic-gear-pump-splined-shaft-2-bolt-flange-nos-oem/





Eaton 26003-RZK Hydraulic Gear Pump Splined Shaft 2-Bolt Flange NOS OEM. EATON 26003-RZK Hidráulic Gear Pump. 1.0625-12 UN-2B SAE O-Ring. 2-Bolt SAE A Flange. 875-14 UNF-2B SAE O-Ring.

]]> https://businessindustrialspline.org/eaton-26003-rzk-hydraulic-gear-pump-splined-shaft-2-bolt-flange-nos-oem/feed/ 0 https://businessindustrialspline.org/fam-stumabo-339253-ss-crosscut-bronze-splined-gear-z-15m-3-75-339-253-new/ https://businessindustrialspline.org/fam-stumabo-339253-ss-crosscut-bronze-splined-gear-z-15m-3-75-339-253-new/#comments Thu, 04 Jun 2026 16:29:52 +0000 https://businessindustrialspline.org/fam-stumabo-339253-ss-crosscut-bronze-splined-gear-z-15m-3-75-339-253-new/









FAM Stumabo 339253 SS Crosscut Bronze Splined Gear Z = 15m 3.75, 339.253 NEW. New in original factory packaging. You will receive exactly ass shown, view photos.

]]> https://businessindustrialspline.org/fam-stumabo-339253-ss-crosscut-bronze-splined-gear-z-15m-3-75-339-253-new/feed/ 0 https://businessindustrialspline.org/4-dp-gear-hob-cutter-20-pa-rh-hss-aa-national-broach-wd-5838-spline-hob/ https://businessindustrialspline.org/4-dp-gear-hob-cutter-20-pa-rh-hss-aa-national-broach-wd-5838-spline-hob/#comments Sat, 30 May 2026 04:17:41 +0000 https://businessindustrialspline.org/4-dp-gear-hob-cutter-20-pa-rh-hss-aa-national-broach-wd-5838-spline-hob/



Type: Gear Hob Cutter (special / spline-type). Diametral Pitch: 4 DP. Pressure Angle: 20° PA. Starts: 1 THD (single-start). Pitch Diameter: 18.81. Spec / Drawing: WD-5838. Standard: MIL-CH / US spec.

]]> https://businessindustrialspline.org/4-dp-gear-hob-cutter-20-pa-rh-hss-aa-national-broach-wd-5838-spline-hob/feed/ 0