https://businessindustrialspline.org Wed, 27 May 2026 16:12:45 +0000 en-CA hourly 1 https://wordpress.org/?v=4.1.1 https://businessindustrialspline.org/high-flow-6-spline-200cc-hydraulic-motor-3/ https://businessindustrialspline.org/high-flow-6-spline-200cc-hydraulic-motor-3/#comments Sat, 06 Nov 2021 04:11:06 +0000 http://businessindustrialspline.org/high-flow-6-spline-200cc-hydraulic-motor-3/


1 3/8 x 6 Spline Standard Agricultural ASAE Spline Designed to Drive through Bare-co Spring Cushion Freewheel Coupling. 200cc 12.2 cu in/Rev Max. 80 L/m 21 US gal/m. 1200 psi 83 bar. 177 ft lbs 240 Nm. 2300 psi 158 bar. 347 ft lbs 470 Nm. 3200 psi 220 bar. 465 ft lbs 630 Nm. 100 L/m 26 US gal/m. 162 ft lbs 220 Nm. 339 ft lbs 460 Nm. 461 ft lbs 625 Nm. 125 L/m 33 US gal/m. 159 ft lbs 215 Nm. 450 ft lbs 610 Nm. Ports – 7/8″ UN “O Ring. Roller type Gear Stator. Disc Valve linked to Roller Shaft via Drive Link. Output shaft supported by tapered roller bearings. High pressure motor seals. Cross port relief required for pressure spikes. These motors are suitable for continuous operation under rough operating conditions such as high operating pressures, thin oil, or frequent reverse cycling. The tapered roller bearings make the motors suitable for absorbing static and dynamic radial loads. The drive link and balanced disc valve minimise hydraulic and mechanical losses. This design produces motors with high efficiency, even at high pressures, and good starting chracteristics. 125 L/min 33 US gal/min. The item “HIGH FLOW 6 SPLINE 200cc HYDRAULIC MOTOR” is in sale since Thursday, October 28, 2021. This item is in the category “Business & Industrial\Hydraulics, Pneumatics, Pumps & Plumbing\Hydraulic & Pneumatic Motors”. The seller is “greenestractorcompanyllcparts” and is located in Sneedville, Tennessee. This item can be shipped to United States.

• Brand: BARE-CO
• MPN: B8710

]]> https://businessindustrialspline.org/high-flow-6-spline-200cc-hydraulic-motor-3/feed/ 0 https://businessindustrialspline.org/prince-double-gear-pump-976-86-cu-in-9-tooth-1632-spline-with-flow-divider/ https://businessindustrialspline.org/prince-double-gear-pump-976-86-cu-in-9-tooth-1632-spline-with-flow-divider/#comments Sun, 20 Dec 2020 01:56:07 +0000 http://businessindustrialspline.org/prince-double-gear-pump-976-86-cu-in-9-tooth-1632-spline-with-flow-divider/







Double Gear Pump with Priority Flow Divider. Max PSI: Front: 2200 Rear: 2400. #16 SAE Inlet Ports (Common Inlet). #10 SAE Outlet Port (Front). #12 SAE Outlet Port (Rear) (Excess Flow). #6 SAE Outlet Port (Rear) (Controlled Flow). SAE 9 Tooth 16/32 Spline Shaft. Clockwise drive shaft rotation. Relief set at 1500 PSI. Priority Flow to be 3.0 GPM at 2000 RPM with minimum pressure on both excess and controlled flow ports. Bearings PTFE composite bearings are used due to the ability to handle heavy loads, low shaft speeds, and high levels of contamination. Engineering tests on the PTFE bearings indicate they will withstand bearing loads over twice as high as conventional steel backed aluminum bearings used in many pumps. The PTFE resin layer will absorb a high degree of contamination with out damage to the pump. Also since the PTFE layer is self lubricating, contamination from bearing wear in high load situations (when no oil film is present) is reduced. The side benefit from reduced friction under all conditions is a reduced consumption of power. Gears and drive shaft are hardened alloy steel of one piece construction. Special gear design: Non-symmetrical gear insures low noise and compactness. Dependable service: Balanced pressure loading insures small dispersion, good durability and maintains high performance. Perfect alignment: Through bore design provides perfect alignment of pump element and assures even bearing load. The item “Prince Double Gear Pump. 976/. 86 Cu In, 9 Tooth 16/32 Spline, with Flow Divider” is in sale since Friday, April 17, 2020. This item is in the category “Business & Industrial\Hydraulics, Pneumatics, Pumps & Plumbing\Pumps & Pump Accessories\Hydraulic Pumps”. The seller is “daltonhyd” and is located in Blaine, Tennessee. This item can be shipped to United States.

• Custom Bundle: No
• MPN: SP-F58
• Shaft Rotation: CW
• Modified Item: No
• Pump Action: Gear Pump
• Rated Pressure: 2200 PSI
• Inlet Port Diameter: #16 SAE
• Power Source: Hydraulic
• Hydraulic Pump Type: Hydraulic Gear Pump
• Country/Region of Manufacture: United States
• Front Section Cu. In. Displacement: .976
• Rated Power: 8.45 & 7.45 GPM @ 2000 RPM
• Rear Section Cu. In. Displacement: .86
• Reservoir Capacity: Does Not Apply
• Max RPM: 3500
• Brand: Prince
• Outlet Port Diameter: #10 SAE
• Mount: 2 Bolt “A” Flange
• Type: Hydraulic

]]> https://businessindustrialspline.org/prince-double-gear-pump-976-86-cu-in-9-tooth-1632-spline-with-flow-divider/feed/ 0 https://businessindustrialspline.org/high-flow-6-spline-200cc-hydraulic-motor-2/ https://businessindustrialspline.org/high-flow-6-spline-200cc-hydraulic-motor-2/#comments Sun, 18 Oct 2020 14:46:57 +0000 http://businessindustrialspline.org/high-flow-6-spline-200cc-hydraulic-motor-2/



1 3/8 x 6 Spline Standard Agricultural ASAE Spline Designed to Drive through Bare-co Spring Cushion Freewheel Coupling. 200cc 12.2 cu in/Rev Max. 80 L/m 21 US gal/m. 1200 psi 83 bar. 177 ft lbs 240 Nm. 2300 psi 158 bar. 347 ft lbs 470 Nm. 3200 psi 220 bar. 465 ft lbs 630 Nm. 100 L/m 26 US gal/m. 162 ft lbs 220 Nm. 339 ft lbs 460 Nm. 461 ft lbs 625 Nm. 125 L/m 33 US gal/m. 159 ft lbs 215 Nm. 450 ft lbs 610 Nm. Ports – 7/8″ UN “O Ring. Roller type Gear Stator. Disc Valve linked to Roller Shaft via Drive Link. Output shaft supported by tapered roller bearings. High pressure motor seals. Cross port relief required for pressure spikes. These motors are suitable for continuous operation under rough operating conditions such as high operating pressures, thin oil, or frequent reverse cycling. The tapered roller bearings make the motors suitable for absorbing static and dynamic radial loads. The drive link and balanced disc valve minimize hydraulic and mechanical losses. This design produces motors with high efficiency, even at high pressures, and good starting characteristics. Track Page Views With. Auctiva’s FREE Counter. The item “HIGH FLOW 6 SPLINE 200cc HYDRAULIC MOTOR” is in sale since Wednesday, January 29, 2020. This item is in the category “Business & Industrial\Hydraulics, Pneumatics, Pumps & Plumbing\Hydraulic & Pneumatic Motors”. The seller is “oktractor” and is located in Mounds, Oklahoma. This item can be shipped to United States, Canada, Mexico, Bermuda.

• MPN: B8710
• Brand: BARE-CO

]]> https://businessindustrialspline.org/high-flow-6-spline-200cc-hydraulic-motor-2/feed/ 0 https://businessindustrialspline.org/real-estate-development-cash-flow-forecasting-module-using-s-curve-corrected/ https://businessindustrialspline.org/real-estate-development-cash-flow-forecasting-module-using-s-curve-corrected/#comments Sat, 22 Jun 2019 02:43:06 +0000 http://businessindustrialspline.org/real-estate-development-cash-flow-forecasting-module-using-s-curve-corrected/ ]]> https://businessindustrialspline.org/real-estate-development-cash-flow-forecasting-module-using-s-curve-corrected/feed/ 0 https://businessindustrialspline.org/high-flow-6-spline-200cc-hydraulic-motor/ https://businessindustrialspline.org/high-flow-6-spline-200cc-hydraulic-motor/#comments Fri, 10 Aug 2018 16:33:43 +0000 http://businessindustrialspline.org/high-flow-6-spline-200cc-hydraulic-motor/


1 3/8 x 6 Spline Standard Agricultural ASAE Spline Designed to Drive through Bare-co Spring Cushion Freewheel Coupling. 200cc 12.2 cu in/Rev Max. 80 L/m 21 US gal/m. 1200 psi 83 bar. 177 ft lbs 240 Nm. 2300 psi 158 bar. 347 ft lbs 470 Nm. 3200 psi 220 bar. 465 ft lbs 630 Nm. 100 L/m 26 US gal/m. 162 ft lbs 220 Nm. 339 ft lbs 460 Nm. 461 ft lbs 625 Nm. 125 L/m 33 US gal/m. 159 ft lbs 215 Nm. 450 ft lbs 610 Nm. Ports – 7/8″ UN “O Ring. Roller type Gear Stator. Disc Valve linked to Roller Shaft via Drive Link. Output shaft supported by tapered roller bearings. High pressure motor seals. Cross port relief required for pressure spikes. These motors are suitable for continuous operation under rough operating conditions such as high operating pressures, thin oil, or frequent reverse cycling. The tapered roller bearings make the motors suitable for absorbing static and dynamic radial loads. The drive link and balanced disc valve minimise hydraulic and mechanical losses. This design produces motors with high efficiency, even at high pressures, and good starting chracteristics. 125 L/min 33 US gal/min. The item “HIGH FLOW 6 SPLINE 200cc HYDRAULIC MOTOR” is in sale since Friday, April 6, 2018. This item is in the category “Business & Industrial\Hydraulics, Pneumatics, Pumps & Plumbing\Hydraulic & Pneumatic Motors”. The seller is “greenestractorcompanyllcparts” and is located in Sneedville, Tennessee. This item can be shipped to United States.

• Brand: BARE-CO
• MPN: B8710

]]> https://businessindustrialspline.org/high-flow-6-spline-200cc-hydraulic-motor/feed/ 0 https://businessindustrialspline.org/cessna-eaton-hydraulic-pump-with-flow-divider-15-gpm-9-spline-916-shaft/ https://businessindustrialspline.org/cessna-eaton-hydraulic-pump-with-flow-divider-15-gpm-9-spline-916-shaft/#comments Sat, 06 Jan 2018 07:08:30 +0000 http://businessindustrialspline.org/cessna-eaton-hydraulic-pump-with-flow-divider-15-gpm-9-spline-916-shaft/





GREAT FOR A POWER STEERING APPLICATION. The item “CESSNA EATON HYDRAULIC PUMP WITH FLOW DIVIDER 15 GPM 9 SPLINE 9/16 SHAFT” is in sale since Thursday, December 07, 2017. This item is in the category “Business & Industrial\Hydraulics, Pneumatics & Pumps\Pumps & Pump Accessories\Hydraulic Pumps”. The seller is “cedar-farm” and is located in Alvord, Iowa. This item can be shipped to United States, Canada, United Kingdom, Germany, France, Australia.

• Brand: CESSNA
• Model: HYDRAULIC PUMP
• MPN: 73155693 25334RAC
• Hydraulic Pump Type: GEAR

]]> https://businessindustrialspline.org/cessna-eaton-hydraulic-pump-with-flow-divider-15-gpm-9-spline-916-shaft/feed/ 0 https://businessindustrialspline.org/real-estate-development-cash-flow-forecasting-module-using-s-curve-old/ https://businessindustrialspline.org/real-estate-development-cash-flow-forecasting-module-using-s-curve-old/#comments Sat, 21 Oct 2017 13:32:57 +0000 http://businessindustrialspline.org/real-estate-development-cash-flow-forecasting-module-using-s-curve-old/ ]]> https://businessindustrialspline.org/real-estate-development-cash-flow-forecasting-module-using-s-curve-old/feed/ 0