https://businessindustrialspline.org Sat, 09 May 2026 02:59:12 +0000 en-CA hourly 1 https://wordpress.org/?v=4.1.1 https://businessindustrialspline.org/seth-guikema-data-driven-modeling/ https://businessindustrialspline.org/seth-guikema-data-driven-modeling/#comments Mon, 27 Jul 2020 04:55:12 +0000 http://businessindustrialspline.org/seth-guikema-data-driven-modeling/ ]]> https://businessindustrialspline.org/seth-guikema-data-driven-modeling/feed/ 0 https://businessindustrialspline.org/ford-new-holland-250mm-18-spline-clutch-driven-plate/ https://businessindustrialspline.org/ford-new-holland-250mm-18-spline-clutch-driven-plate/#comments Tue, 07 Jul 2020 01:21:06 +0000 http://businessindustrialspline.org/ford-new-holland-250mm-18-spline-clutch-driven-plate/




Ford New Holland 250MM 18 Spline – CLUTCH DRIVEN PLATE. Gwynedd Farm Machinery Part No VPG2607 (Please quote when contacting us). 3435 – Ford New Holland (Clutch and flywheel – Dual 250/250 LuK). 3935 – Ford New Holland (Clutch and flywheel – Dual 250/250 LuK). All Major Credit /Debit Cards Accepted. Heavier deliveries are dispatched same day if ordered before 12.00 noon. All Items listed in this shop are in stock ready for dispatch. We reserve the right to apply a surcharge for deliveries to the following postcodes. AB DD FK IV KW PA PH GY, HS, IM, IV41-49, IV51,55&56, JE, KA27-28, KW15-17, PA20, 41-49, PA60-78, PH42-44, ZE & BT (Northern Ireland). The item “Ford New Holland 250MM 18 Spline CLUTCH DRIVEN PLATE” is in sale since Tuesday, May 19, 2020. This item is in the category “Business, Office & Industrial\Agriculture/Farming\Equipment Parts & Accessories\Other Equipment Parts & Accessories”. The seller is “gwyneddfarmmachinery545″ and is located in Caernarfon. This item can be shipped to United Kingdom, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, United States, Bahrain, Canada, Japan, New Zealand, China, Israel, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Bangladesh, Belize, Bolivia, Brunei darussalam, Dominica, Ecuador, Egypt, Guernsey, Gibraltar, Guadeloupe, Grenada, French guiana, Iceland, Jersey, Cambodia, Saint kitts and nevis, Liechtenstein, Macao, Monaco, Martinique, Nicaragua, Pakistan, Peru, Paraguay, Turks and caicos islands, Aruba, Saudi arabia, United arab emirates, Chile, Bahamas, Costa rica, Guatemala, Honduras, Jamaica, Kuwait, Panama, Philippines, Qatar, Trinidad and tobago, Uruguay, Viet nam, Antigua and barbuda, Bermuda, Barbados, Cayman islands, Jordan, Saint lucia, Sri lanka, Maldives, Oman, Reunion, South africa, Ukraine, Colombia.

• Compatible Equipment Make: Ford
• MPN: Does Not Apply
• Brand: Unbranded

]]> https://businessindustrialspline.org/ford-new-holland-250mm-18-spline-clutch-driven-plate/feed/ 0 https://businessindustrialspline.org/9306c-hypro-gear-driven-cast-pump-1-38-6-splined-pto-hub-1-5-in-x-1-25-out/ https://businessindustrialspline.org/9306c-hypro-gear-driven-cast-pump-1-38-6-splined-pto-hub-1-5-in-x-1-25-out/#comments Mon, 07 Oct 2019 02:27:57 +0000 http://businessindustrialspline.org/9306c-hypro-gear-driven-cast-pump-1-38-6-splined-pto-hub-1-5-in-x-1-25-out/


Add to Favorite Sellers. 9306C Hypro Gear Driven Cast Pump, 1-3/8 6 Splined PTO Hub, 1.5 in x 1.25 out. PTO Drive Pump, centrifugal. Planetary oil bath gear drive Max. Flow: 110-117 gpm Max. Pressure: 80 psi (Shut off) Max. Speed: 600 or 1000 rpm (540 and 1000 rpm PTO) Shafts: 1″ solid, 1-3/8″ hollow, 1-3/4″ hollow Port sizes: 1-1/2″ NPT inlet, 1-1/4 NPT outlet Max. Fluid temperature: 140°F Housing: cast iron Impeller: glass-filled nylon Pump shaft rotation: CCW Weight: 44 Ibs. /20 kg Pump seals: Viton/ceramic standard (Buna-N ceramic and Viton/silicon carbide available). The item “9306C Hypro Gear Driven Cast Pump, 1-3/8 6 Splined PTO Hub, 1.5 in x 1.25 out” is in sale since Friday, May 18, 2018. This item is in the category “Business & Industrial\Hydraulics, Pneumatics, Pumps & Plumbing\Pumps & Pump Accessories\Hydraulic Pumps”. The seller is “farmerbobsparts” and is located in Germantown, Tennessee. This item can be shipped to United States.

• Brand: Farmer Bob’s Parts
• MPN: 9303C-O
• Modified Item: No
• California Prop 65 Warning: Prop 65 is intended to provide California residents with information about compounds in the environment around them that might be harmful (i.e. have been linked to cancer, reproductive harm, or developmental defects). Prop 65 dictates that California businesses with more than 10 employees that sell products in the state are required to provide clear and reasonable warnings about a chemicals ability to cause cancer, reproductive harm, or birth defects on packaging or labels.

]]> https://businessindustrialspline.org/9306c-hypro-gear-driven-cast-pump-1-38-6-splined-pto-hub-1-5-in-x-1-25-out/feed/ 0 https://businessindustrialspline.org/ptoc-1000-20sp-ace-pump-1-25-x-1-pto-driven-centrifugal-1000-rpm-20-spline/ https://businessindustrialspline.org/ptoc-1000-20sp-ace-pump-1-25-x-1-pto-driven-centrifugal-1000-rpm-20-spline/#comments Tue, 05 Feb 2019 23:56:45 +0000 http://businessindustrialspline.org/ptoc-1000-20sp-ace-pump-1-25-x-1-pto-driven-centrifugal-1000-rpm-20-spline/



ACE PTO Belt Driven. 1-3/4 20 Spline Input Shaft. Suction 1-1/4 – Discharge 1. Maximum Gallons Per Minute – 65 GPM Maximum PSI – 80 PSI. Stainless Steel Shaft and Wear Ring. Standard Viton® Carbon/Ceramic seal or Optional Severe Duty Silicon. Spring loaded idler absorbs shock of PTO engagement. If we are out of stock on an item please be understanding. We will contact you and let you know how long your back order will take. Most orders will not be effected by this. We do not offer pickups. It is very important that you leave this information once the order is complete and you have received your items. We must receive payments within 7 days or our system will file a NPB complaint. We are not perfect but we can correct our mistakes. The item “PTOC-1000-20SP ACE PUMP 1.25 x 1 PTO DRIVEN CENTRIFUGAL 1000 RPM 20 SPLINE” is in sale since Thursday, October 4, 2018. This item is in the category “Business & Industrial\Hydraulics, Pneumatics, Pumps & Plumbing\Pumps & Pump Accessories\Other Pumps”. The seller is “carnellsales” and is located in Memphis, Tennessee. This item can be shipped to United States.

• Brand: Ace Pumps
• MPN: PTOC-1000-20SP
• Country/Region of Manufacture: United States

]]> https://businessindustrialspline.org/ptoc-1000-20sp-ace-pump-1-25-x-1-pto-driven-centrifugal-1000-rpm-20-spline/feed/ 0 https://businessindustrialspline.org/ptoc-600-6sp-ace-belt-driven-pto-pump-1-38-6-spline-540-rpm-pto-shaft/ https://businessindustrialspline.org/ptoc-600-6sp-ace-belt-driven-pto-pump-1-38-6-spline-540-rpm-pto-shaft/#comments Wed, 23 Jan 2019 07:19:56 +0000 http://businessindustrialspline.org/ptoc-600-6sp-ace-belt-driven-pto-pump-1-38-6-spline-540-rpm-pto-shaft/


Add to Favorite Sellers. PTOC-600-6SP, ACE Belt Driven PTO PUMP, 1-3/8 6 Spline 540 RPM PTO Shaft. PTOC-150-600-6SP Suction 1-1/2″ Female Pipe Thread Discharge 1-1/4″ Female Pipe Thread Chemical Resistant Valox Impeller Standard Viton Carbon/Ceramic Mechanical Seal Spring loaded idler absorbs shock of PTO engagement New BAC-15-PIN feature ensures proper alignment Cast iron centrifugal for direct mount on 6 spline, 1-3/8, 540 RPM PTO Shaft Maximum Gallons Per Minute – 100 GPM Maximum PSI – 110 PSI Do Not Run Dry – Seal damage will result from running dry. Impeller damage may also occur if run dry for an extended period. Do Not Run With Flow Shutoff For Extended Periods – Running the pump with no flow for extended periods of time will result i. The item “PTOC-600-6SP, ACE Belt Driven PTO PUMP, 1-3/8 6 Spline 540 RPM PTO Shaft” is in sale since Thursday, May 17, 2018. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment Parts & Accessories\Tractor Parts”. The seller is “farmerbobsparts” and is located in Southaven, Mississippi. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam.

• Brand: Farmer Bob’s Parts
• MPN: PTOC-600-6SP

]]> https://businessindustrialspline.org/ptoc-600-6sp-ace-belt-driven-pto-pump-1-38-6-spline-540-rpm-pto-shaft/feed/ 0 https://businessindustrialspline.org/ace-pumps-ptoc-1000-21sp-pto-belt-driven-centrifugal-pump-1000-rpm-6-spline/ https://businessindustrialspline.org/ace-pumps-ptoc-1000-21sp-pto-belt-driven-centrifugal-pump-1000-rpm-6-spline/#comments Sun, 20 Jan 2019 18:37:51 +0000 http://businessindustrialspline.org/ace-pumps-ptoc-1000-21sp-pto-belt-driven-centrifugal-pump-1000-rpm-6-spline/


Add to Favorite Sellers. Ace Pumps PTOC-1000-21SP PTO Belt Driven Centrifugal Pump, 1000 rpm, 6 Spline. PTOC-1000-21SP Suction 1-1/4″ Female Pipe Thread Discharge 1″ Female Pipe Thread Chemical Resistant Valox Impeller Standard Viton Carbon/Ceramic Mechanical Seal Spring loaded idler absorbs shock of PTO engagement New BAC-15-PIN feature ensures proper alignment Cast iron centrifugal with for direct mount on 21 spline, 1-3/8, 1000 RPM PTO Shaft Maximum Gallons Per Minute – 65 GPM Maximum PSI – 80 PSI Do Not Run Dry – Seal damage will result from running dry. Impeller damage may also occur if run dry for an extended period. Do Not Run With Flow Shutoff For Extended Periods – Running the pump with no flow for extended periods of time will result in excessive heat and pump failure. A continuous bypass is recommended for low flow applications Maximum PSI – 80 PSI Do Not Run Dry – Seal damage will result from running dry. A continuous bypass is recommended for low flow applications. The item “Ace Pumps PTOC-1000-21SP PTO Belt Driven Centrifugal Pump, 1000 rpm, 6 Spline” is in sale since Thursday, May 17, 2018. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment Parts & Accessories\Tractor Parts”. The seller is “farmerbobsparts” and is located in Southaven, Mississippi. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam.

• Brand: Farmer Bob’s Parts
• MPN: PTOC-1000-21SP

]]> https://businessindustrialspline.org/ace-pumps-ptoc-1000-21sp-pto-belt-driven-centrifugal-pump-1000-rpm-6-spline/feed/ 0 https://businessindustrialspline.org/metaris-1718918-p20-hydraulic-13-spline-pto-driven-pump-10gpm-1200rpm/ https://businessindustrialspline.org/metaris-1718918-p20-hydraulic-13-spline-pto-driven-pump-10gpm-1200rpm/#comments Fri, 23 Nov 2018 18:33:22 +0000 http://businessindustrialspline.org/metaris-1718918-p20-hydraulic-13-spline-pto-driven-pump-10gpm-1200rpm/






METARIS HYDRAULIC PTO PUMP. The item “Metaris 1718918 P20 Hydraulic 13 Spline PTO Driven Pump 10GPM @ 1200RPM” is in sale since Tuesday, November 13, 2018. This item is in the category “Business & Industrial\Hydraulics, Pneumatics, Pumps & Plumbing\Pumps & Pump Accessories\Hydraulic Pumps”. The seller is “zoresco-5″ and is located in Bedford, Ohio. This item can be shipped to United States.

• Brand: METARIS
• MPN: 1718918

]]> https://businessindustrialspline.org/metaris-1718918-p20-hydraulic-13-spline-pto-driven-pump-10gpm-1200rpm/feed/ 0 https://businessindustrialspline.org/drum-mixer-5-cubic-ft-cap-3-point-pto-540-rpm-chain-driven-6-spline/ https://businessindustrialspline.org/drum-mixer-5-cubic-ft-cap-3-point-pto-540-rpm-chain-driven-6-spline/#comments Fri, 09 Mar 2018 05:46:20 +0000 http://businessindustrialspline.org/drum-mixer-5-cubic-ft-cap-3-point-pto-540-rpm-chain-driven-6-spline/



Lower 48 United States. Drum Mixer – 5 Cubic Ft Cap – 3 Point PTO – 540 RPM – Chain Driven – 6 Spline. 2-piece steel drum construction with internal paddles for uniform mixing and clean dumping – Compact, trouble-free, long life design with few moving parts – Hydraulic top link cylinder provides positive dump control – Also great for mixing feed, fertilizer, inoculating seed, potting soil and other mixing jobs. See similar items in our. Hydraulic top link cylinder provides positive dump control. Empty Drum Volume cu. Spline Type: 1-3/8″ x 6 Spline Yoke with 1-3/16″ Smooth Yoke Implement End. Drive Type: Chain Driven Drum. HP Requirement: 20 to 25. Measurement: 42-29/32″ L x 38-37/64″ W x 30-45/64 H. Within the Lower 48 United States. Due to our business systems and processes, we leave feedback after receiving feedback from you, our valued customers. We believe this process ensures good communication and problem resolution in advance of posting permanent feedback. The item “Drum Mixer 5 Cubic Ft Cap 3 Point PTO 540 RPM Chain Driven 6 Spline” is in sale since Sunday, July 10, 2016. This item is in the category “Business & Industrial\Light Equipment & Tools\Mixers – Concrete & Mortar”. The seller is “pacifictundra” and is located in CA, MO, & VT. This item can be shipped worldwide.

• Brand: Pacific Tundra
• MPN: Does Not Apply
• Model: PT2207
• RPM: 540
• Drive Type: Chain Driven
• Required HP: 20 to 25
• Spline: 6
• Chain Type: 40
• Steel Gauge: 11
• Cubic Foot Capacity: 5
• Commercial: Yes
• Industrial: Yes
• PTO: Yes
• 3 Point: Yes
• Drywall: Yes
• Mortar: Yes
• Bundle Listing: No
• Concrete: Yes

]]> https://businessindustrialspline.org/drum-mixer-5-cubic-ft-cap-3-point-pto-540-rpm-chain-driven-6-spline/feed/ 0 https://businessindustrialspline.org/nip-makita-hr4041c-1-916-rotary-hammerspline-driven-withfree-shipping/ https://businessindustrialspline.org/nip-makita-hr4041c-1-916-rotary-hammerspline-driven-withfree-shipping/#comments Fri, 09 Jun 2017 19:12:43 +0000 http://businessindustrialspline.org/nip-makita-hr4041c-1-916-rotary-hammerspline-driven-withfree-shipping/





YOU ARE VIEWING A BRAND NEW IN PACKAGE MAKITA HR4041C 1 9/16 ROTARY HAMMER WITH SPLINE DRIVE. CLEARANCE ITEM = BIG SAVINGS!! ALL SALES ARE FINAL. The Makita HR4041C 1-9/16 in. Spline-Shank Rotary Hammer Drill features a powerful 12 Amp motor engineered with field-core interlocking steel laminations, a dual ball-bearing armature and a large-surface commutator for an efficient transfer of power. It delivers up to 230 – 460 RPM and 1,300 – 2,600 BPM and has 2 modes for hammering only and hammering with rotation. Soft-start functionality facilitates control and improved accuracy, while sequential impact timing promotes faster work. Powerful 12 AMP motor delivers 6.8 ft. Of impact energy to handle the most demanding applications. Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs. Soft start suppresses start-up reaction for increased accuracy. Variable speed control dial enables user to match the speed to the application for greater versatility. Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds. Sequential impact timing delivers timed hammering during rotation to minimize overlapping bit impacts for up to 50% faster drilling. Automatic brush cut-off protects commutator from damage for longer tool life. 2-mode operation for “Hammering Only” or “Hammering with Rotation” for multiple applications. “No hammering when idling” function helps increase tool life. High quality aluminum housing for greater durability and longer tool life. Makita Motor Advantage engineered with field core interlocking steel laminations, dual ball bearing armature and more copper commutator bars, increasing energy transfer efficiency for more power and longer tool life. The item “NIP MAKITA HR4041C 1 9/16 ROTARY HAMMER/SPLINE DRIVEN WithFREE SHIPPING” is in sale since Saturday, May 06, 2017. This item is in the category “Business & Industrial\Light Equipment & Tools\Drills & Hammers\Rotary Hammer Drills”. The seller is “g.t.rentalscorp” and is located in Brooklyn, New York. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica.

• Brand: Makita
• Shank Type: Spline
• MPN: Does Not Apply
• Model: HR4041C
• Country/Region of Manufacture: Japan

]]> https://businessindustrialspline.org/nip-makita-hr4041c-1-916-rotary-hammerspline-driven-withfree-shipping/feed/ 0 https://businessindustrialspline.org/fairfield-mfg-w1b140330-torque-hub-wheel-driven-spline-drive-9-studs/ https://businessindustrialspline.org/fairfield-mfg-w1b140330-torque-hub-wheel-driven-spline-drive-9-studs/#comments Tue, 19 Apr 2016 09:39:46 +0000 http://businessindustrialspline.org/fairfield-mfg-w1b140330-torque-hub-wheel-driven-spline-drive-9-studs/













Fairfield MFG W1B140330 Torque Hub Wheel Driven Spline Drive 9 Studs. BULLSEYE INDUSTRIAL SALES, LLC. 221 US Highway 20 Suite B. Bullseye Industrial Sales is your leading source for new and used Industrial Surplus items. Our goal is to provide quality new and used surplus items at a discount price. Your business is important to us. Next Day & Second Day Air Services are available. We choose the carrier. Will there be a dock or forklift. LOCAL PICK-UP Prefer to pick it up yourself? You are welcome to do so, by appointment. We will load it free of charge, unless otherwise stated in listing. After the return period has ended, you can no longer return the product. The item “Fairfield MFG W1B140330 Torque Hub Wheel Driven Spline Drive 9 Studs” is in sale since Thursday, April 07, 2016. This item is in the category “Business & Industrial\Heavy Equipment Parts & Accs\Construction Equip Parts”. The seller is “bullseyeindustrialsales” and is located in Middlebury, Indiana. This item can be shipped worldwide.

• Brand: Fairfield MFG
• Country of Manufacture: USA
• MPN: W1B140330

]]> https://businessindustrialspline.org/fairfield-mfg-w1b140330-torque-hub-wheel-driven-spline-drive-9-studs/feed/ 0