Business Industrial Spline » divider https://businessindustrialspline.org Mon, 03 Aug 2026 19:53:44 +0000 en-CA hourly 1 https://wordpress.org/?v=4.1.1 Original Rhino 00770426 Input Shaft 20 spline for Divider Gearbox (02-064) https://businessindustrialspline.org/original-rhino-00770426-input-shaft-20-spline-for-divider-gearbox-02-064/ https://businessindustrialspline.org/original-rhino-00770426-input-shaft-20-spline-for-divider-gearbox-02-064/#comments Wed, 22 Dec 2021 16:39:29 +0000 https://businessindustrialspline.org/original-rhino-00770426-input-shaft-20-spline-for-divider-gearbox-02-064/
Original Rhino 00770426 Input Shaft 20 spline for Divider Gearbox (02-064)
Original Rhino 00770426 Input Shaft 20 spline for Divider Gearbox (02-064)
Original Rhino 00770426 Input Shaft 20 spline for Divider Gearbox (02-064)
Original Rhino 00770426 Input Shaft 20 spline for Divider Gearbox (02-064)
Original Rhino 00770426 Input Shaft 20 spline for Divider Gearbox (02-064)
Original Rhino 00770426 Input Shaft 20 spline for Divider Gearbox (02-064)
Original Rhino 00770426 Input Shaft 20 spline for Divider Gearbox (02-064)
Original Rhino 00770426 Input Shaft 20 spline for Divider Gearbox (02-064)
Original Rhino 00770426 Input Shaft 20 spline for Divider Gearbox (02-064)
Original Rhino 00770426 Input Shaft 20 spline for Divider Gearbox (02-064)

Original Rhino 00770426 Input Shaft 20 spline for Divider Gearbox (02-064)
AG-260 1 3/4 20 splines Input Shaft. Please Look at all pictures. One (1) Brand New Rhino 1 3/4 -20 Splines Input Shaft 00770426 for SE15 mower models. 1 3/4 -20 Splines Input Shaft. 14.00 inches (355.75mm) overall length. This Shaft fits many rotary cutters from different manufacturers including. Rhino 00770426 input shaft for gearbox 00758957 on SE15 model with serial number 10001 – 12007. SN 10001 – 12007. Your complete satisfaction is important to us. All parts are guaranteed to meet with your approval! The use of their part numbers and or drawings are only used to aid AgriQualityPartsSupply customers in finding the correct replacement part. The item “Original Rhino 00770426 Input Shaft 20 spline for Divider Gearbox (02-064)” is in sale since Monday, February 15, 2021. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment Attachments\Mowers, Mower Decks & Mower Conditioners”. The seller is “agriqualityparts.supply” and is located in Topeka, Kansas. This item can be shipped to United States.
  • MPN: 00770426
  • Brand: Rhino/Alamo
  • Mower Type: SE15

Original Rhino 00770426 Input Shaft 20 spline for Divider Gearbox (02-064)
]]> https://businessindustrialspline.org/original-rhino-00770426-input-shaft-20-spline-for-divider-gearbox-02-064/feed/ 0 Prince Double Gear Pump. 976/. 86 Cu In, 9 Tooth 16/32 Spline, with Flow Divider https://businessindustrialspline.org/prince-double-gear-pump-976-86-cu-in-9-tooth-1632-spline-with-flow-divider/ https://businessindustrialspline.org/prince-double-gear-pump-976-86-cu-in-9-tooth-1632-spline-with-flow-divider/#comments Sun, 20 Dec 2020 01:56:07 +0000 http://businessindustrialspline.org/prince-double-gear-pump-976-86-cu-in-9-tooth-1632-spline-with-flow-divider/
Prince Double Gear Pump. 976/. 86 Cu In, 9 Tooth 16/32 Spline, with Flow Divider
Prince Double Gear Pump. 976/. 86 Cu In, 9 Tooth 16/32 Spline, with Flow Divider
Prince Double Gear Pump. 976/. 86 Cu In, 9 Tooth 16/32 Spline, with Flow Divider
Prince Double Gear Pump. 976/. 86 Cu In, 9 Tooth 16/32 Spline, with Flow Divider
Prince Double Gear Pump. 976/. 86 Cu In, 9 Tooth 16/32 Spline, with Flow Divider

Prince Double Gear Pump. 976/. 86 Cu In, 9 Tooth 16/32 Spline, with Flow Divider
Double Gear Pump with Priority Flow Divider. Max PSI: Front: 2200 Rear: 2400. #16 SAE Inlet Ports (Common Inlet). #10 SAE Outlet Port (Front). #12 SAE Outlet Port (Rear) (Excess Flow). #6 SAE Outlet Port (Rear) (Controlled Flow). SAE 9 Tooth 16/32 Spline Shaft. Clockwise drive shaft rotation. Relief set at 1500 PSI. Priority Flow to be 3.0 GPM at 2000 RPM with minimum pressure on both excess and controlled flow ports. Bearings PTFE composite bearings are used due to the ability to handle heavy loads, low shaft speeds, and high levels of contamination. Engineering tests on the PTFE bearings indicate they will withstand bearing loads over twice as high as conventional steel backed aluminum bearings used in many pumps. The PTFE resin layer will absorb a high degree of contamination with out damage to the pump. Also since the PTFE layer is self lubricating, contamination from bearing wear in high load situations (when no oil film is present) is reduced. The side benefit from reduced friction under all conditions is a reduced consumption of power. Gears and drive shaft are hardened alloy steel of one piece construction. Special gear design: Non-symmetrical gear insures low noise and compactness. Dependable service: Balanced pressure loading insures small dispersion, good durability and maintains high performance. Perfect alignment: Through bore design provides perfect alignment of pump element and assures even bearing load. The item “Prince Double Gear Pump. 976/. 86 Cu In, 9 Tooth 16/32 Spline, with Flow Divider” is in sale since Friday, April 17, 2020. This item is in the category “Business & Industrial\Hydraulics, Pneumatics, Pumps & Plumbing\Pumps & Pump Accessories\Hydraulic Pumps”. The seller is “daltonhyd” and is located in Blaine, Tennessee. This item can be shipped to United States.
  • Custom Bundle: No
  • MPN: SP-F58
  • Shaft Rotation: CW
  • Modified Item: No
  • Pump Action: Gear Pump
  • Rated Pressure: 2200 PSI
  • Inlet Port Diameter: #16 SAE
  • Power Source: Hydraulic
  • Hydraulic Pump Type: Hydraulic Gear Pump
  • Country/Region of Manufacture: United States
  • Front Section Cu. In. Displacement: .976
  • Rated Power: 8.45 & 7.45 GPM @ 2000 RPM
  • Rear Section Cu. In. Displacement: .86
  • Reservoir Capacity: Does Not Apply
  • Max RPM: 3500
  • Brand: Prince
  • Outlet Port Diameter: #10 SAE
  • Mount: 2 Bolt “A” Flange
  • Type: Hydraulic

Prince Double Gear Pump. 976/. 86 Cu In, 9 Tooth 16/32 Spline, with Flow Divider
]]> https://businessindustrialspline.org/prince-double-gear-pump-976-86-cu-in-9-tooth-1632-spline-with-flow-divider/feed/ 0 Cessna Eaton Hydraulic Pump With Flow Divider 15 Gpm 9 Spline 9/16 Shaft https://businessindustrialspline.org/cessna-eaton-hydraulic-pump-with-flow-divider-15-gpm-9-spline-916-shaft/ https://businessindustrialspline.org/cessna-eaton-hydraulic-pump-with-flow-divider-15-gpm-9-spline-916-shaft/#comments Sat, 06 Jan 2018 07:08:30 +0000 http://businessindustrialspline.org/cessna-eaton-hydraulic-pump-with-flow-divider-15-gpm-9-spline-916-shaft/
Cessna Eaton Hydraulic Pump With Flow Divider 15 Gpm 9 Spline 9/16 Shaft
Cessna Eaton Hydraulic Pump With Flow Divider 15 Gpm 9 Spline 9/16 Shaft
Cessna Eaton Hydraulic Pump With Flow Divider 15 Gpm 9 Spline 9/16 Shaft

Cessna Eaton Hydraulic Pump With Flow Divider 15 Gpm 9 Spline 9/16 Shaft
GREAT FOR A POWER STEERING APPLICATION. The item “CESSNA EATON HYDRAULIC PUMP WITH FLOW DIVIDER 15 GPM 9 SPLINE 9/16 SHAFT” is in sale since Thursday, December 07, 2017. This item is in the category “Business & Industrial\Hydraulics, Pneumatics & Pumps\Pumps & Pump Accessories\Hydraulic Pumps”. The seller is “cedar-farm” and is located in Alvord, Iowa. This item can be shipped to United States, Canada, United Kingdom, Germany, France, Australia.
  • Brand: CESSNA
  • Model: HYDRAULIC PUMP
  • MPN: 73155693 25334RAC
  • Hydraulic Pump Type: GEAR

Cessna Eaton Hydraulic Pump With Flow Divider 15 Gpm 9 Spline 9/16 Shaft
]]> https://businessindustrialspline.org/cessna-eaton-hydraulic-pump-with-flow-divider-15-gpm-9-spline-916-shaft/feed/ 0