https://businessindustrialspline.org Sun, 25 Oct 2026 18:52:44 +0000 en-CA hourly 1 https://wordpress.org/?v=4.1.1 https://businessindustrialspline.org/spur-gear-61-teeth-15-25od-2-738-bore-6-spline-20-degree-2-50-face-f5s4-5/ https://businessindustrialspline.org/spur-gear-61-teeth-15-25od-2-738-bore-6-spline-20-degree-2-50-face-f5s4-5/#comments Sat, 24 Oct 2026 18:45:46 +0000 https://businessindustrialspline.org/spur-gear-61-teeth-15-25od-2-738-bore-6-spline-20-degree-2-50-face-f5s4-5/






Spur Gear 61 Teeth, 15.25″OD, 2.738″ Bore 6 Spline, 20 Degree, 2.50 Face. MATERIAL DOCUMENT AND CLASSIFICATION. QQ-S-681 FED SPEC SINGLE MATERIAL RESPONSE OVERALL. STEEL COMP 150-125 OVERALL. 3.880 INCHES SECOND END. 3.880 INCHES FIRST END. 2.738 INCHES BOTH ENDS. NOMINAL DISTANCE BETWEEN BODY FACE AND RECESSED HUB END. 0.002 INCHES SECOND END. 0.002 INCHES FIRST END. 45.0 ROCKWELL C MINIMUM TEETH AND 55.0 ROCKWELL C MAXIMUM TEETH. STRAIGHT SPLINE BOTH ENDS. 15.2500 INCHES NOMINAL. WEBBED, WITH LIGHTENING HOLES. You are welcome to physically inspect this item. We are located in a Northwest Suburb of Detroit Michigan.

]]> https://businessindustrialspline.org/spur-gear-61-teeth-15-25od-2-738-bore-6-spline-20-degree-2-50-face-f5s4-5/feed/ 0 https://businessindustrialspline.org/invo-spline-32-dp-x-20-degree-pa-12-inch-bore-master-gear-48-teeth/ https://businessindustrialspline.org/invo-spline-32-dp-x-20-degree-pa-12-inch-bore-master-gear-48-teeth/#comments Tue, 08 Sep 2026 09:24:54 +0000 https://businessindustrialspline.org/invo-spline-32-dp-x-20-degree-pa-12-inch-bore-master-gear-48-teeth/






This Invo Spline 32 DP x 20 degree PA 1/2 inch bore Master Gear is a precision inspection tool used in gear inspection. Made by Invo Spline in the United States, this master gear can ensure accurate and consistent results in the inspection and measurement of 32 DP x 20 degree PA. Has a 1/2 inch bore size. 32 DP x 20 degree PA x 48 teeth 1.5005 inch Pitch Diameter, 1/2 inch bore and face width. DON’T MAKE OFFER ON FRI OR SAT, IT WILL EXPIRE BEFORE I READ IT ON MONDAY.

]]> https://businessindustrialspline.org/invo-spline-32-dp-x-20-degree-pa-12-inch-bore-master-gear-48-teeth/feed/ 0 https://businessindustrialspline.org/spur-gear-61-teeth-15-25od-2-738-bore-6-spline-20-degree-2-50-face-f5s4-4/ https://businessindustrialspline.org/spur-gear-61-teeth-15-25od-2-738-bore-6-spline-20-degree-2-50-face-f5s4-4/#comments Fri, 26 Jun 2026 05:52:43 +0000 https://businessindustrialspline.org/spur-gear-61-teeth-15-25od-2-738-bore-6-spline-20-degree-2-50-face-f5s4-4/






Spur Gear 61 Teeth, 15.25″OD, 2.738″ Bore 6 Spline, 20 Degree, 2.50 Face. MATERIAL DOCUMENT AND CLASSIFICATION. QQ-S-681 FED SPEC SINGLE MATERIAL RESPONSE OVERALL. STEEL COMP 150-125 OVERALL. 3.880 INCHES SECOND END. 3.880 INCHES FIRST END. 2.738 INCHES BOTH ENDS. NOMINAL DISTANCE BETWEEN BODY FACE AND RECESSED HUB END. 0.002 INCHES SECOND END. 0.002 INCHES FIRST END. 45.0 ROCKWELL C MINIMUM TEETH AND 55.0 ROCKWELL C MAXIMUM TEETH. STRAIGHT SPLINE BOTH ENDS. 15.2500 INCHES NOMINAL. WEBBED, WITH LIGHTENING HOLES. You are welcome to physically inspect this item. We are located in a Northwest Suburb of Detroit Michigan.

]]> https://businessindustrialspline.org/spur-gear-61-teeth-15-25od-2-738-bore-6-spline-20-degree-2-50-face-f5s4-4/feed/ 0 https://businessindustrialspline.org/110680019-tractor-half-80-degree-cv-driveline-540-rpm-1-38-6-splined/ https://businessindustrialspline.org/110680019-tractor-half-80-degree-cv-driveline-540-rpm-1-38-6-splined/#comments Tue, 16 Jun 2026 05:23:44 +0000 https://businessindustrialspline.org/110680019-tractor-half-80-degree-cv-driveline-540-rpm-1-38-6-splined/




A-110680019-AI Tractor Half 80� CV Driveline; 540 RPM, 1 3/8-6 Splined. 2580 Series Complete Constant Velocity Tractor Half Shaft, type B. Minimum C-to-C length: 48 (1210) mm. Tractor end: 1-3/8 6 Spline. Fits Vermeer Disc Mowers; Woods Rotary Cutters; Walterscheid WWE & WWZ series. It may be necessary to cut this driveline to length. Verify the length by ensuring that sufficient overlap of the drive tubes exists in all working positions without the possibility of bottoming out. C to C Min: 1210 MM/ 48. Tractor: 1 3/8- 6. 1 to 1 of 1. Driveline (by application) > Tractor Half CV Driveline. Vermeer MOWER, DISC: RC9120. Please Message Me if You Have Any Questions.

]]> https://businessindustrialspline.org/110680019-tractor-half-80-degree-cv-driveline-540-rpm-1-38-6-splined/feed/ 0 https://businessindustrialspline.org/ash-gear-supply-h7n30-016b-imp-spline-hob-1632-gw15-dp-171-30-degree/ https://businessindustrialspline.org/ash-gear-supply-h7n30-016b-imp-spline-hob-1632-gw15-dp-171-30-degree/#comments Sun, 12 Apr 2026 11:44:47 +0000 https://businessindustrialspline.org/ash-gear-supply-h7n30-016b-imp-spline-hob-1632-gw15-dp-171-30-degree/











You are looking at. ASH GEAR AND SUPPLY SPLINE HOB. This spline hob is new, open box. H7N30-016B-IMP, 16/32 GW15-DP-171, 30 degree. Se look closely at the pictures as they are part of the description. You get what yo. Please look at the photographs provided for they are part of the description. “OUR e B A Y MISSION”. Please, take the time to let us know if there is a problem, we will work with you! For s&h to anywhere in the lower 48 states. We try and get it to you as quickly as we can for a good price! Track Page Views With. Auctiva’s FREE Counter. THANKS FOR LOOKING AT THIS LISTING!!

]]> https://businessindustrialspline.org/ash-gear-supply-h7n30-016b-imp-spline-hob-1632-gw15-dp-171-30-degree/feed/ 0 https://businessindustrialspline.org/invo-spline-80-dp-x-20-degree-pa-12-inch-bore-master-gear-160-teeth/ https://businessindustrialspline.org/invo-spline-80-dp-x-20-degree-pa-12-inch-bore-master-gear-160-teeth/#comments Mon, 23 Mar 2026 07:58:43 +0000 https://businessindustrialspline.org/invo-spline-80-dp-x-20-degree-pa-12-inch-bore-master-gear-160-teeth/





This Invo Spline 80 DP x 20 degree PA 1/2 inch bore Master Gear is a precision inspection tool used in gear inspection. Made by Invo Spline in the United States, this master gear can ensure accurate and consistent results in the inspection and measurement of 80 DP x 20 degree PA. Has a 1/2 inch bore size and 20 degree pitch angle. 80 DP x 20 degree PA x 160 teeth 2.0013 inch Pitch Diameter, 1/2 inch bore and face width.

]]> https://businessindustrialspline.org/invo-spline-80-dp-x-20-degree-pa-12-inch-bore-master-gear-160-teeth/feed/ 0 https://businessindustrialspline.org/tractor-implement-pto-90-degree-gearbox-6-12-flat-belt-pulley-6-spline-input/ https://businessindustrialspline.org/tractor-implement-pto-90-degree-gearbox-6-12-flat-belt-pulley-6-spline-input/#comments Sat, 12 Apr 2025 21:05:43 +0000 https://businessindustrialspline.org/tractor-implement-pto-90-degree-gearbox-6-12-flat-belt-pulley-6-spline-input/












UNKNOWN APPLICATION, 6 SPLINE APPROX. PLEASE CONFIRM IT IS CORRECT FOR YOUR APPLICATION.

]]> https://businessindustrialspline.org/tractor-implement-pto-90-degree-gearbox-6-12-flat-belt-pulley-6-spline-input/feed/ 0 https://businessindustrialspline.org/spur-gear-61-teeth-15-25od-2-738-bore-6-spline-20-degree-2-50-face-f5s4-3/ https://businessindustrialspline.org/spur-gear-61-teeth-15-25od-2-738-bore-6-spline-20-degree-2-50-face-f5s4-3/#comments Mon, 29 Jan 2024 16:08:45 +0000 https://businessindustrialspline.org/spur-gear-61-teeth-15-25od-2-738-bore-6-spline-20-degree-2-50-face-f5s4-3/






Spur Gear 61 Teeth, 15.25″OD, 2.738″ Bore 6 Spline, 20 Degree, 2.50 Face. STRAIGHT SPLINE BOTH ENDS. 45.0 ROCKWELL C MINIMUM TEETH AND 55.0 ROCKWELL C MAXIMUM TEETH.

]]> https://businessindustrialspline.org/spur-gear-61-teeth-15-25od-2-738-bore-6-spline-20-degree-2-50-face-f5s4-3/feed/ 0 https://businessindustrialspline.org/spur-gear-61-teeth-15-25od-2-738-bore-6-spline-20-degree-2-50-face-f5s4-2/ https://businessindustrialspline.org/spur-gear-61-teeth-15-25od-2-738-bore-6-spline-20-degree-2-50-face-f5s4-2/#comments Tue, 19 Sep 2023 13:25:58 +0000 https://businessindustrialspline.org/spur-gear-61-teeth-15-25od-2-738-bore-6-spline-20-degree-2-50-face-f5s4-2/






Spur Gear 61 Teeth, 15.25″OD, 2.738″ Bore 6 Spline, 20 Degree, 2.50 Face. MATERIAL DOCUMENT AND CLASSIFICATION. QQ-S-681 FED SPEC SINGLE MATERIAL RESPONSE OVERALL. STEEL COMP 150-125 OVERALL. 3.880 INCHES SECOND END. 3.880 INCHES FIRST END. 2.738 INCHES BOTH ENDS. NOMINAL DISTANCE BETWEEN BODY FACE AND RECESSED HUB END. 0.002 INCHES SECOND END. 0.002 INCHES FIRST END. 45.0 ROCKWELL C MINIMUM TEETH AND 55.0 ROCKWELL C MAXIMUM TEETH. STRAIGHT SPLINE BOTH ENDS. 15.2500 INCHES NOMINAL. WEBBED, WITH LIGHTENING HOLES. You are welcome to physically inspect this item. We are located in a Northwest Suburb of Detroit Michigan.

]]> https://businessindustrialspline.org/spur-gear-61-teeth-15-25od-2-738-bore-6-spline-20-degree-2-50-face-f5s4-2/feed/ 0 https://businessindustrialspline.org/spur-gear-61-teeth-15-25od-2-738-bore-6-spline-20-degree-2-50-face-f5s4/ https://businessindustrialspline.org/spur-gear-61-teeth-15-25od-2-738-bore-6-spline-20-degree-2-50-face-f5s4/#comments Mon, 24 Apr 2023 18:26:38 +0000 https://businessindustrialspline.org/spur-gear-61-teeth-15-25od-2-738-bore-6-spline-20-degree-2-50-face-f5s4/






Spur Gear 61 Teeth, 15.25″OD, 2.738″ Bore 6 Spline, 20 Degree, 2.50 Face. MATERIAL DOCUMENT AND CLASSIFICATION. QQ-S-681 FED SPEC SINGLE MATERIAL RESPONSE OVERALL. STEEL COMP 150-125 OVERALL. 3.880 INCHES SECOND END. 3.880 INCHES FIRST END. 2.738 INCHES BOTH ENDS. NOMINAL DISTANCE BETWEEN BODY FACE AND RECESSED HUB END. 0.002 INCHES SECOND END. 0.002 INCHES FIRST END. 45.0 ROCKWELL C MINIMUM TEETH AND 55.0 ROCKWELL C MAXIMUM TEETH. STRAIGHT SPLINE BOTH ENDS. 15.2500 INCHES NOMINAL. WEBBED, WITH LIGHTENING HOLES. You are welcome to physically inspect this item. We are located in a Northwest Suburb of Detroit Michigan. This item is in the category “Business & Industrial\Other Business & Industrial”. The seller is “jspec1″ and is located in this country: US. This item can be shipped worldwide.

• Brand: Oldenburg Gear
• Model: A84-2
• MPN: A84-2

]]> https://businessindustrialspline.org/spur-gear-61-teeth-15-25od-2-738-bore-6-spline-20-degree-2-50-face-f5s4/feed/ 0