https://businessindustrialspline.org Tue, 09 Jun 2026 05:09:52 +0000 en-CA hourly 1 https://wordpress.org/?v=4.1.1 https://businessindustrialspline.org/jeremywell-tractor-pto-rotary-cutter-slip-clutch-1-38x-6-spline-both-ends/ https://businessindustrialspline.org/jeremywell-tractor-pto-rotary-cutter-slip-clutch-1-38x-6-spline-both-ends/#comments Mon, 08 Jun 2026 05:07:00 +0000 https://businessindustrialspline.org/jeremywell-tractor-pto-rotary-cutter-slip-clutch-1-38x-6-spline-both-ends/








Jeremywell Tractor Pto Rotary Cutter Slip Clutch 1-3/8X 6-Spline Both Ends. 1-3/8″ 6 Spline Shaft End: This 6-spline PTO shaft was designed with a female and male end size of 1-3/8″ to provide the perfect diameter match of your implement input shaft and tractor output shaft, and has a clutch diameter of 7-3/32. You can easily adjust the overall length of the tension springs to set an appropriate torque for your rotary cutter slip clutch, simply tighten or loosen the nuts to your desired range. Adjustable Friction Disc: The PTO friction clutch adopts an essential spring and disc set up, assembled with friction discs inside to help transmit forces, allowing two sides of the PTO shaft to spin at different speeds. Adjustable / Replaceable Friction Disc. Adjustment Range from 30 – 50 Horse Power. Adjustable Friction Disc: The PTO friction clutch adopts an essential spring and disc set up, assembled with friction discs inside to help transmit f.

]]> https://businessindustrialspline.org/jeremywell-tractor-pto-rotary-cutter-slip-clutch-1-38x-6-spline-both-ends/feed/ 0 https://businessindustrialspline.org/4-dp-gear-hob-cutter-20-pa-rh-hss-aa-national-broach-wd-5838-spline-hob/ https://businessindustrialspline.org/4-dp-gear-hob-cutter-20-pa-rh-hss-aa-national-broach-wd-5838-spline-hob/#comments Sat, 30 May 2026 04:17:41 +0000 https://businessindustrialspline.org/4-dp-gear-hob-cutter-20-pa-rh-hss-aa-national-broach-wd-5838-spline-hob/



Type: Gear Hob Cutter (special / spline-type). Diametral Pitch: 4 DP. Pressure Angle: 20° PA. Starts: 1 THD (single-start). Pitch Diameter: 18.81. Spec / Drawing: WD-5838. Standard: MIL-CH / US spec.

]]> https://businessindustrialspline.org/4-dp-gear-hob-cutter-20-pa-rh-hss-aa-national-broach-wd-5838-spline-hob/feed/ 0 https://businessindustrialspline.org/universal-fit-75hp-rotary-cutter-gearbox-6-spline-input-shaft-11ratio-3/ https://businessindustrialspline.org/universal-fit-75hp-rotary-cutter-gearbox-6-spline-input-shaft-11ratio-3/#comments Sat, 09 May 2026 02:59:12 +0000 https://businessindustrialspline.org/universal-fit-75hp-rotary-cutter-gearbox-6-spline-input-shaft-11ratio-3/


HOUSING: SHAFTS: GEARS: SEALS: BEARINGS: OIL: WEIGHT: INPUT SHAFT. 60-45-10 Nodular UNS G51200 UNS G51200 Triple Lipped Spring Loaded Tapered Roller EP-140, 38oz, 1.12l 82 lbs, 37.2kg 1 3/8 x 6 spline.

]]> https://businessindustrialspline.org/universal-fit-75hp-rotary-cutter-gearbox-6-spline-input-shaft-11ratio-3/feed/ 0 https://businessindustrialspline.org/bm5-125-cycloidal-hydraulic-motor-6-spline-for-agt-rc72-brush-cutter-usa-stock/ https://businessindustrialspline.org/bm5-125-cycloidal-hydraulic-motor-6-spline-for-agt-rc72-brush-cutter-usa-stock/#comments Fri, 10 Apr 2026 23:41:46 +0000 https://businessindustrialspline.org/bm5-125-cycloidal-hydraulic-motor-6-spline-for-agt-rc72-brush-cutter-usa-stock/











BM5-125 Cycloidal Hydraulic Motor 6 Spline for AGT RC72 Brush Cutter USA STOCK. Welcome to our store! Cycloidal Hydraulic Moto for AGT RC72. AGT BM5-125 Cycloidal Hydraulic Motor is flange mounted and weighs 29LBS. With a sleek blue color and precise specifications, this motor is the perfect fit for your business or industrial needs. This cycloidal hydraulic motor offers reliable performance and durability for your various hydraulic applications. Compatible Model: RC72 Brush Cutter. Thanks for your understanding. If you have any needs for.

]]> https://businessindustrialspline.org/bm5-125-cycloidal-hydraulic-motor-6-spline-for-agt-rc72-brush-cutter-usa-stock/feed/ 0 https://businessindustrialspline.org/agt-bm5-125-hydraulic-motor-cycloidal-motor-rc72-brush-cutter-attachment-6spline/ https://businessindustrialspline.org/agt-bm5-125-hydraulic-motor-cycloidal-motor-rc72-brush-cutter-attachment-6spline/#comments Tue, 07 Apr 2026 11:31:48 +0000 https://businessindustrialspline.org/agt-bm5-125-hydraulic-motor-cycloidal-motor-rc72-brush-cutter-attachment-6spline/










Agrotk Hydraulic Motor RC72 Brush Cutter Cycloidal Motor BM5-125 Attachment 6 Spline. The AGT BM5-125 Hydraulic Motor is a high-quality cycloid hydraulic motor designed specifically for use with RC72 brush cutters. With a sturdy flange mounting type, this unit is equipped with a 6 spline attachment for easy installation. The blue motor is rated for skid steer brush cutter applications and is manufactured in China by the reputable brand Agrotk. Perfect for powering brush cutting equipment, this hydraulic motor offers reliable and efficient performance for a variety of industrial and commercial applications. We offer three equivalent brands: TOPCAT, MOWER KING, and AGROTK. All products are manufactured to the same high standards and specifications. Professional installation or assembly may be required – we recommend qualified technicians for setup and operation to ensure safety and performance.

]]> https://businessindustrialspline.org/agt-bm5-125-hydraulic-motor-cycloidal-motor-rc72-brush-cutter-attachment-6spline/feed/ 0 https://businessindustrialspline.org/new-cycloidal-hydraulic-motor-6-spline-agt-bm5-125-for-rc72-brush-cutter-attach-4/ https://businessindustrialspline.org/new-cycloidal-hydraulic-motor-6-spline-agt-bm5-125-for-rc72-brush-cutter-attach-4/#comments Tue, 24 Mar 2026 20:02:47 +0000 https://businessindustrialspline.org/new-cycloidal-hydraulic-motor-6-spline-agt-bm5-125-for-rc72-brush-cutter-attach-4/














2.8 TON SHANTUI STE35SR COMPACT MINI EXCAVATOR-HIGH PERFORMANCE DIGGER. 2026 NEW ARRIVAL REPLACEMENTS CYCLOIDAL HYDRAULIC MOTOR FOR AGT RC72 BRUSH CUTTER. High-Efficiency Performance – Delivers consistent hydraulic power with minimal energy loss for smooth operation. Durable Construction – Precision-engineered gears and hardened materials resist wear, ensuring long service life. Wide Compatibility – Works with standard hydraulic oils and fits most industrial/mobile equipment systems. Low Noise & Vibration – Optimized design reduces operational noise for quieter workplaces. Easy Maintenance – Simple disassembly and accessible parts for quick servicing. Thanks for your understanding. If you’re in a remote area, the carrier may be changed to your local logistics.

]]> https://businessindustrialspline.org/new-cycloidal-hydraulic-motor-6-spline-agt-bm5-125-for-rc72-brush-cutter-attach-4/feed/ 0 https://businessindustrialspline.org/new-cycloidal-hydraulic-motor-6-spline-agt-bm5-125-for-rc72-brush-cutter-attach-3/ https://businessindustrialspline.org/new-cycloidal-hydraulic-motor-6-spline-agt-bm5-125-for-rc72-brush-cutter-attach-3/#comments Thu, 05 Mar 2026 08:01:46 +0000 https://businessindustrialspline.org/new-cycloidal-hydraulic-motor-6-spline-agt-bm5-125-for-rc72-brush-cutter-attach-3/














2026 NEW ARRIVAL REPLACEMENTS CYCLOIDAL HYDRAULIC MOTOR FOR AGT RC72 BRUSH CUTTER. High-Efficiency Performance – Delivers consistent hydraulic power with minimal energy loss for smooth operation. Durable Construction – Precision-engineered gears and hardened materials resist wear, ensuring long service life. Wide Compatibility – Works with standard hydraulic oils and fits most industrial/mobile equipment systems. Low Noise & Vibration – Optimized design reduces operational noise for quieter workplaces. Easy Maintenance – Simple disassembly and accessible parts for quick servicing. Thanks for your understanding. If you’re in a remote area, the carrier may be changed to your local logistics.

]]> https://businessindustrialspline.org/new-cycloidal-hydraulic-motor-6-spline-agt-bm5-125-for-rc72-brush-cutter-attach-3/feed/ 0 https://businessindustrialspline.org/new-cycloidal-hydraulic-motor-6-spline-agt-bm5-125-for-rc72-brush-cutter-attach-2/ https://businessindustrialspline.org/new-cycloidal-hydraulic-motor-6-spline-agt-bm5-125-for-rc72-brush-cutter-attach-2/#comments Thu, 19 Feb 2026 19:33:45 +0000 https://businessindustrialspline.org/new-cycloidal-hydraulic-motor-6-spline-agt-bm5-125-for-rc72-brush-cutter-attach-2/














2026 NEW ARRIVAL REPLACEMENTS CYCLOIDAL HYDRAULIC MOTOR FOR AGT RC72 BRUSH CUTTER. High-Efficiency Performance – Delivers consistent hydraulic power with minimal energy loss for smooth operation. Durable Construction – Precision-engineered gears and hardened materials resist wear, ensuring long service life. Wide Compatibility – Works with standard hydraulic oils and fits most industrial/mobile equipment systems. Low Noise & Vibration – Optimized design reduces operational noise for quieter workplaces. Easy Maintenance – Simple disassembly and accessible parts for quick servicing. Thanks for your understanding. If you’re in a remote area, the carrier may be changed to your local logistics.

]]> https://businessindustrialspline.org/new-cycloidal-hydraulic-motor-6-spline-agt-bm5-125-for-rc72-brush-cutter-attach-2/feed/ 0 https://businessindustrialspline.org/alamo-yoke-1-38-6-spline-withas-lock-for-rhino-rotary-cutter-se7/ https://businessindustrialspline.org/alamo-yoke-1-38-6-spline-withas-lock-for-rhino-rotary-cutter-se7/#comments Tue, 20 Jan 2026 18:14:42 +0000 https://businessindustrialspline.org/alamo-yoke-1-38-6-spline-withas-lock-for-rhino-rotary-cutter-se7/




Has some scuffs/scratches – new.

]]> https://businessindustrialspline.org/alamo-yoke-1-38-6-spline-withas-lock-for-rhino-rotary-cutter-se7/feed/ 0 https://businessindustrialspline.org/servis-rhino-rotary-cutter-gearbox-1-34-x-20-spline-input-shaft-code-00758689-2/ https://businessindustrialspline.org/servis-rhino-rotary-cutter-gearbox-1-34-x-20-spline-input-shaft-code-00758689-2/#comments Fri, 09 Jan 2026 17:51:58 +0000 https://businessindustrialspline.org/servis-rhino-rotary-cutter-gearbox-1-34-x-20-spline-input-shaft-code-00758689-2/










75 – 1 ¾ -20- Spline Input Shaft. Please Look at all pictures. One (1) Brand New Input shaft 1 ¾ -20 Spline for Servis Rhino / Alamo gearboxes. 12-3/4(324.0mm) overall length. This Input Shaft fits many gearboxes from different manufacturers including. Servis Rhino/ Alamo TW60, TW72, TW84, TW96. Turbo 96, SE10-4A, SE15-4A, SE15 and. AG 75S – 1:1.21RD – 1 3/4 – 20. AG 75S – 1:1.46SU – 1 3/4 – 20. AG 75R – 1:1.46SU – 1 3/4 – 20. AG 75S – 1:1.46SU – 1 3/8 – 6B. AG 75S – 1.46:1RD – 1 3/4 – 20. GEARBOX WW75S 1-1.46SU 1-3/4. GEARBOX WW75R 1:1.46SU 1-3/4. AG 75S – 1:1.21SU – 1 3/4 – 20. GEARBOX SPD RD CWith CCW. SN 14812 – Current. AG 75R – 1:1.21SU – 1 3/4 – 20. SUPER AG-75S-1:1.46SU-1 3/4-20 WITH 6BOLTS. SUPER AG-75R-1:1.46SU – 1 3/4 – 20 WITH 6 BOLT MOUNT. SUPER AG-75S-1.21:1RD – 1 3/4 – 20 WITH 6 BOLT MOUNT. SUPER AG-75S-1:1.21SU – 1 3/4 – 20 WITH 6 BOLT MOUNT. SUPER AG-75R-1:1.21SU – 1 3/4 – 20 WITH 6 BOLT MOUNT. Super AG-75S-1:3SU-1 3/4-20 WITH 6BOLT MOUNT. SN 17675 – Current. GEARBOX ASSY – LEFT WING & CENTER. SN 10001 to 14811. GEARBOX ASSY – RIGHT WING. GEARBOX SPD INC CWith CCW. SUPER AG-75R-1:1.46SU 1 3/4. SUPER AG-75S-1.21:1RD- 1 3/4. SUPER AG-75S-1:1.21SU- 1 3/4. SUPER AG-75R-1:1.21SU 1 3/4. S75EO-S 1:1.6SU-1 3/4-20 Gear Drive. ASY, GEARBOX, NON – LUBED. Your complete satisfaction is important to us. All parts are guaranteed to meet with your approval! The use of their part numbers and or drawings are only used to aid AgriQualityPartsSupply customers in finding the correct replacement part.

]]> https://businessindustrialspline.org/servis-rhino-rotary-cutter-gearbox-1-34-x-20-spline-input-shaft-code-00758689-2/feed/ 0