https://businessindustrialspline.org Thu, 10 Sep 2026 09:33:21 +0000 en-CA hourly 1 https://wordpress.org/?v=4.1.1 https://businessindustrialspline.org/nb-ball-spline-nut-sspf-30-28-mm-id-x-45-mm-od-carbon-steelresin-2-mps/ https://businessindustrialspline.org/nb-ball-spline-nut-sspf-30-28-mm-id-x-45-mm-od-carbon-steelresin-2-mps/#comments Sat, 13 Jun 2026 05:17:50 +0000 https://businessindustrialspline.org/nb-ball-spline-nut-sspf-30-28-mm-id-x-45-mm-od-carbon-steelresin-2-mps/






Open box, no retail packaging. Inside Diameter 28 mm. Outside Diameter 45 mm. Overall Length 80 mm. Flange Diameter 70 mm. Flange Thickness 10 mm. Mounting Hole Diameter 11 mm. Mounting Hole Center 54 mm. Dynamic Load Capacity 289 N. Static Load Capacity 1,470 N. Steady State Speed 2 mps. Maximum Operating Temperature 176 °F.

]]> https://businessindustrialspline.org/nb-ball-spline-nut-sspf-30-28-mm-id-x-45-mm-od-carbon-steelresin-2-mps/feed/ 0 https://businessindustrialspline.org/nb-spline-shaft-carbon-steel-8-mm-150-mm-3hvd8/ https://businessindustrialspline.org/nb-spline-shaft-carbon-steel-8-mm-150-mm-3hvd8/#comments Wed, 03 Dec 2025 04:31:45 +0000 https://businessindustrialspline.org/nb-spline-shaft-carbon-steel-8-mm-150-mm-3hvd8/


Spline Shaft, Shaft Diameter 8 mm, Overall Length 150 mm, Material Stainless Steel, Minimum Surface Hardness 60 Rc, System of Measurement Metric, Diameter Tolerance Minimum 7.985 mm, Diameter Tolerance Maximum 8 mm, Finish Plain. Spline Shaft, Carbon Steel, 8 mm, 150 mm 3HVD8. Grainger Part #:3HVD8. Add to Favorite Sellers. Sign up to Newsletter. View more great items! These items are intended to be used in North America. Power adapters and other modifications may be necessary for proper operation in other countries. GRAINGER STANDARD TERMS AND CONDITIONS. Please read these terms and conditions carefully. They contain important information concerning customer? Legal rights, warranties, obligations and available dispute resolutions remedies. They also provide that if Grainger is unable to resolve any matter to Customer? S satisfaction, Customer will exclusively use arbitration to decide the dispute and Customer will bring its claim solely on an individual basis and not in a class action or representative proceeding. Grainger reserves the right to revise these Terms and Conditions at any time. Product Compliance and Suitability. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose. Certain products may not be available for sale in all areas. Grainger does not guarantee compliance or suitability of the products it sells with any laws, codes or regulations, nor does Grainger accept responsibility for construction, installation and/or use of a product. It is Customer’s responsibility to review the product application and all applicable laws, codes and regulations for each relevant jurisdiction to be sure that the construction, installation, and/or use involving the products are compliant. S acceptance of any order is subject to Customer? S assent to all of the terms and conditions set forth herein. Customer’s assent to these terms and conditions shall be presumed from Customer’s receipt of Grainger? S acknowledgment, or from Customer? S acceptance of all or any part of the products ordered. No additions or modifications of Grainger? S terms and conditions by Customer shall be binding upon Grainger, unless agreed to in writing by an authorized representative of Grainger. Grainger reserves the right to accept or reject any order. The terms and conditions in: (i) Grainger? S forms; (ii) acknowledgments; (iii) quotations; (iv) invoices; (v) web sites; (vi) catalogs; and (vii) extension of credit are incorporated herein by reference, and constitute the entire and exclusive agreement between Customer and Grainger. Business Customers hereby agree to indemnify and hold Grainger harmless against any breach of this representation. ADDITIONAL TERMS AND CONDITIONS RELATED TO EXPORT OF GRAINGER PRODUCTS. IN ADDITION TO THE STANDARD TERMS AND CONDITIONS IN SECTION I, EXPORT SALES OF GRAINGER PRODUCTS WILL BE GOVERNED BY THE FOLLOWING ADDITIONAL TERMS AND CONDITIONS RELATED TO EXPORT OF GRAINGER PRODUCTS? IN THE EVENT OF A CONFLICT BETWEEN GRAINGER? S STANDARD TERMS AND CONDITIONS IN SECTION I AND THE ADDITIONAL EXPORT TERMS IN SECTION III, THE ADDITIONAL TERMS IN SECTION III SHALL PREVAIL FOR EXPORT SALES OF GRAINGER PRODUCTS. Customer acknowledges that no order shall be deemed accepted unless and until it is verified and accepted by Grainger, or any of its U. Affiliates and divisions, at a continental U. Facility or at any of its websites. Customer further consents that submission of its order shall subject Customer to the jurisdiction of the federal courts of the U. And of the State where acceptance occurred in the U. Grainger is required to charge U. Export Controls and Related Regulations. Customer represents and warrants that it is not designated on, or associated with, any party designated on any of the U. Government restricted parties lists, including without limitation, the U. Commerce Department Bureau of Industry and Security? Denied Persons List; Entity List or Unverified List; the U. Treasury Department Office of Foreign Assets Control? Specially Designated Nationals and Blocked Persons List; or the U. State Department Directorate of Defense Trade Controls? Customer shall comply with all applicable U. Economic sanctions and export control laws and regulations, including without limitation, the regulations administered by OFAC, the Export Administration Regulations? Administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. It is specifically agreed that Customer shall be the foreign principal party in interest? In the event a license is required for export from the U. Agent of the FPPI the exporter of record for purposes of meeting EAR requirements. Country of Importation and Anti-diversion. Customer represents that it is purchasing products from the U. And importing them to the country for the use of the ultimate consignee specified in the Customer and Grainger documentation. Customer agrees that the products will not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U. Government or as otherwise authorized by U. Any commodities, technology and software will be exported from the U. In accordance with the U. Export Administration Regulations and other applicable laws or regulations. Diversion contrary to U. Customer further agrees to inform Grainger at the time of order of any North American Free Trade Agreement or other special documentation, packaging or product marking or labeling, but Grainger shall not be responsible for providing any such documentation, packaging, marking or labeling other than such documents that are necessary under U. Export laws and regulations for export, unless Grainger expressly agrees to do so. Permits, Export, and Import Licenses. Customer shall be responsible for obtaining any licenses or other official authorizations that may be required by the country of importation. When the Customer is designated as the U. Principal Party of Interest, the Customer shall be responsible for obtaining licenses under the EAR, International Traffic in Arms Regulations, Toxic Substances Control Act, or other applicable laws or regulations. If the Customer is the FPPI, then the terms contained in subsection 6 of this Section III shall apply. The rights and obligations of the parties under these terms and conditions shall not be governed by the provisions of the 1980 United Nations Convention of Contracts for the International Sale of Goods or the United Nations Convention on the Limitation Period in the International Sale of Goods. Rather, these terms and conditions shall be governed by the laws of the State of Illinois, U. Including its provisions of the Uniform Commercial Code, but excluding its conflict of law rules.

]]> https://businessindustrialspline.org/nb-spline-shaft-carbon-steel-8-mm-150-mm-3hvd8/feed/ 0 https://businessindustrialspline.org/nb-spline-shaft-carbon-steel-8-mm-500-mm-ssp8s-500mmef/ https://businessindustrialspline.org/nb-spline-shaft-carbon-steel-8-mm-500-mm-ssp8s-500mmef/#comments Tue, 19 Dec 2023 22:14:29 +0000 https://businessindustrialspline.org/nb-spline-shaft-carbon-steel-8-mm-500-mm-ssp8s-500mmef/






It can help sustain loads in several directions simultaneously, making it great for compact machines. For Use With NB Ball Spline Nuts.

]]> https://businessindustrialspline.org/nb-spline-shaft-carbon-steel-8-mm-500-mm-ssp8s-500mmef/feed/ 0 https://businessindustrialspline.org/nippon-bearing-ssp40-ball-spline-with-key-groove-40mm-id-100mm-l-carbon-stl-fs/ https://businessindustrialspline.org/nippon-bearing-ssp40-ball-spline-with-key-groove-40mm-id-100mm-l-carbon-stl-fs/#comments Mon, 21 Nov 2022 08:56:10 +0000 https://businessindustrialspline.org/nippon-bearing-ssp40-ball-spline-with-key-groove-40mm-id-100mm-l-carbon-stl-fs/








NIPPON BEARING SSP40 BALL SPLINE WITH KEY GROOVE 40MM ID 100MM L CARBON STL FS. Contact Trojan Supply today for Cash for your surplus. Find us via G00GLE search. If you have surplus items that are sitting on your shelf, Our promise is to help expedite the process by getting you cash fast and making reasonable offers, based on current market value for your items. Is an independent distributor of used refurbished and new surplus industrial automation and networking equipment. Not an Authorized Distributor. Or in any way affiliated with Cisco, HP, Rockwell Automation, Siemens and any other listed manufacturers. Trojan Supply sells hardware products only and does not re-sell software licenses. Respects intellectual property of others, and we ask our customers to do the same. Customer acknowledges and agrees that. Does not provide any operating system software or software right-to-use licenses with the products it sells. Is not an Authorized Distributor of the products. All listed logos, trademarks or service marks are property of their respective owners. WAREHOUSE 4 DRAWER 87. This item is in the category “Business & Industrial\Industrial Automation & Motion Controls\Rotary & Linear Motion\Linear Actuators”. The seller is “thelectricontact” and is located in this country: US. This item can be shipped to United States.

• Model: BALL SPLINE WITH KEY GROOVE
• Modified Item: No
• Custom Bundle: No
• NumberOfItems: 1
• Type: BALL SPLINE NUT
• ItemPackageQuantity: 1
• MPN: SSP40
• Brand: NB NIPPON BEARING COMPANY
• Bore / Inside Diameter: 40 MM
• Length: 100 MM
• Material: CARBON STEEL

]]> https://businessindustrialspline.org/nippon-bearing-ssp40-ball-spline-with-key-groove-40mm-id-100mm-l-carbon-stl-fs/feed/ 0 https://businessindustrialspline.org/how-to-make-industrial-agriculture-carbon-negative-and-sustainable/ https://businessindustrialspline.org/how-to-make-industrial-agriculture-carbon-negative-and-sustainable/#comments Sun, 27 Sep 2020 00:41:34 +0000 http://businessindustrialspline.org/how-to-make-industrial-agriculture-carbon-negative-and-sustainable/ ]]> https://businessindustrialspline.org/how-to-make-industrial-agriculture-carbon-negative-and-sustainable/feed/ 0 https://businessindustrialspline.org/nb-ssp25s-750mm-spline-shaft-carbon-steel-23-mm-750-mm/ https://businessindustrialspline.org/nb-ssp25s-750mm-spline-shaft-carbon-steel-23-mm-750-mm/#comments Sun, 27 Dec 2015 13:53:23 +0000 http://businessindustrialspline.org/nb-ssp25s-750mm-spline-shaft-carbon-steel-23-mm-750-mm/


NB SSP25S -750mm Spline Shaft, Carbon Steel, 23 mm, 750 mm. NB Ball Spline Nuts. Mounting Surface to Shaft Center In. Mounting Hole Center to Center. Mounting Hole from Shaft End. Fuel surcharges may be applied. Zoro has a simple mission-We help small business stay competitive! We do this by offering thousands of great products at super low prices. We want to change that! Zoro has most of the products that the “big guys” have and we offer every single one of them at an everyday low price. There are no complex discount structures to understand. We have our headquarters in Buffalo Grove, IL-though we are petitioning the town to rename itself Fox Grove. We’re coming for you, Buffaloes. LIKE YOU, WE BELIEVE THAT THE KEY TO SUCCESS IS TO ALWAYS PUT OUR CUSTOMERS FIRST. You May Also like. This listing is currently undergoing maintenance, we apologise for any inconvenience caused. The item “NB SSP25S -750mm Spline Shaft, Carbon Steel, 23 mm, 750 mm” is in sale since Wednesday, August 20, 2014. This item is in the category “Business & Industrial\Electrical & Test Equipment\Industrial Automation, Control\Drives & Motion Control\Linear Actuators”. The seller is “zoro_us” and is located in Louisiana, Missouri. This item can be shipped to United States.

• Material: Carbon Steel
• Brand: NB
• MPN: SSP25S -750mm
• SKU: G1092831
• Finish: Plain
• For Use With: NB Ball Spline Nuts
• Item: Spline Shaft
• Length: 750mm
• Length (mm): 750
• Temp. Range (F): 176
• Type: Ball Spline
• Shaft Dia. (mm): 23
• Dia. Tolerance Max.: 22.979 mm
• Dia. Tolerance Min.: 23 mm
• Min. Surface Hardness: 60 HRC
• Travel Length (mm): 600
• Mounting End Dia. (mm): 23
• Shaft Dia.: 23mm
• Package Quantity: 1

]]> https://businessindustrialspline.org/nb-ssp25s-750mm-spline-shaft-carbon-steel-23-mm-750-mm/feed/ 0