https://businessindustrialspline.org Sun, 28 Jun 2026 05:56:45 +0000 en-CA hourly 1 https://wordpress.org/?v=4.1.1 https://businessindustrialspline.org/spur-gear-61-teeth-15-25od-2-738-bore-6-spline-20-degree-2-50-face-f5s4-4/ https://businessindustrialspline.org/spur-gear-61-teeth-15-25od-2-738-bore-6-spline-20-degree-2-50-face-f5s4-4/#comments Fri, 26 Jun 2026 05:52:43 +0000 https://businessindustrialspline.org/spur-gear-61-teeth-15-25od-2-738-bore-6-spline-20-degree-2-50-face-f5s4-4/






Spur Gear 61 Teeth, 15.25″OD, 2.738″ Bore 6 Spline, 20 Degree, 2.50 Face. MATERIAL DOCUMENT AND CLASSIFICATION. QQ-S-681 FED SPEC SINGLE MATERIAL RESPONSE OVERALL. STEEL COMP 150-125 OVERALL. 3.880 INCHES SECOND END. 3.880 INCHES FIRST END. 2.738 INCHES BOTH ENDS. NOMINAL DISTANCE BETWEEN BODY FACE AND RECESSED HUB END. 0.002 INCHES SECOND END. 0.002 INCHES FIRST END. 45.0 ROCKWELL C MINIMUM TEETH AND 55.0 ROCKWELL C MAXIMUM TEETH. STRAIGHT SPLINE BOTH ENDS. 15.2500 INCHES NOMINAL. WEBBED, WITH LIGHTENING HOLES. You are welcome to physically inspect this item. We are located in a Northwest Suburb of Detroit Michigan.

]]> https://businessindustrialspline.org/spur-gear-61-teeth-15-25od-2-738-bore-6-spline-20-degree-2-50-face-f5s4-4/feed/ 0 https://businessindustrialspline.org/shaft-weld-yoke-1-1116-bore-20-spline-55n-series-302-5500-farmer-bobs-parts/ https://businessindustrialspline.org/shaft-weld-yoke-1-1116-bore-20-spline-55n-series-302-5500-farmer-bobs-parts/#comments Tue, 02 Jun 2026 16:24:41 +0000 https://businessindustrialspline.org/shaft-weld-yoke-1-1116-bore-20-spline-55n-series-302-5500-farmer-bobs-parts/




Fits Series 55N: U-Joint Cap Size: 1-17/32″ / 1.531″ Cap to Cap: 4-5/16″ / 4.313″. Add to Favorite Sellers. Shaft Weld Yoke 1-11/16 Bore 20 Spline 55N Series.

]]> https://businessindustrialspline.org/shaft-weld-yoke-1-1116-bore-20-spline-55n-series-302-5500-farmer-bobs-parts/feed/ 0 https://businessindustrialspline.org/weasler-pto-yoke-slip-sleeve-for-1-bore-15-spline-shaft-heavy-duty/ https://businessindustrialspline.org/weasler-pto-yoke-slip-sleeve-for-1-bore-15-spline-shaft-heavy-duty/#comments Sat, 02 May 2026 02:10:57 +0000 https://businessindustrialspline.org/weasler-pto-yoke-slip-sleeve-for-1-bore-15-spline-shaft-heavy-duty/



Weasler PTO Yoke Slip Sleeve for 1 Bore 15 Spline Shaft – Heavy Duty. Made to OEM Specs to Provide a Direct Fitment & Easy Install! Manufactured with High Grade Materials by an Industry Leader.

]]> https://businessindustrialspline.org/weasler-pto-yoke-slip-sleeve-for-1-bore-15-spline-shaft-heavy-duty/feed/ 0 https://businessindustrialspline.org/he310606-shaft-2-diameter-39-516-length-57-threaded-bore-1-970-spline-dia-2/ https://businessindustrialspline.org/he310606-shaft-2-diameter-39-516-length-57-threaded-bore-1-970-spline-dia-2/#comments Sun, 12 Apr 2026 23:45:46 +0000 https://businessindustrialspline.org/he310606-shaft-2-diameter-39-516-length-57-threaded-bore-1-970-spline-dia-2/











HE310606 Shaft 2″ Diameter 39-5/16″ Length. 57″ Threaded Bore 1.970″ Spline Dia. Check out my feedback! Tracking is provided on ALL Orders. UPS Next Day Air is available, Please inquire for pricing. For our customers who can? For YOU, we constantly strive to find ways to improve our performance.

]]> https://businessindustrialspline.org/he310606-shaft-2-diameter-39-516-length-57-threaded-bore-1-970-spline-dia-2/feed/ 0 https://businessindustrialspline.org/pto-shaft-6-spline-1-14-bore-x-2-38-o-d-star-48-2/ https://businessindustrialspline.org/pto-shaft-6-spline-1-14-bore-x-2-38-o-d-star-48-2/#comments Wed, 01 Apr 2026 11:09:40 +0000 https://businessindustrialspline.org/pto-shaft-6-spline-1-14-bore-x-2-38-o-d-star-48-2/






This item is:____________PTO Shaft: 6 Spline (1 1/4″ Bore) x 2 3/8″ O. Includes only what is shown in the picture. No PO Boxes, APO, FPO or similar addresses. All other locations will be charged extra. In the event that any clauses or phrases contained here within are ruled out by a judge, the law, a lawyer, jurors, and or any other entity all others remain in effect. Most boxes have been opened for inspection and photos. If items are listed as new they may not come with original packaging. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.

]]> https://businessindustrialspline.org/pto-shaft-6-spline-1-14-bore-x-2-38-o-d-star-48-2/feed/ 0 https://businessindustrialspline.org/invo-spline-80-dp-x-20-degree-pa-12-inch-bore-master-gear-160-teeth/ https://businessindustrialspline.org/invo-spline-80-dp-x-20-degree-pa-12-inch-bore-master-gear-160-teeth/#comments Mon, 23 Mar 2026 07:58:43 +0000 https://businessindustrialspline.org/invo-spline-80-dp-x-20-degree-pa-12-inch-bore-master-gear-160-teeth/





This Invo Spline 80 DP x 20 degree PA 1/2 inch bore Master Gear is a precision inspection tool used in gear inspection. Made by Invo Spline in the United States, this master gear can ensure accurate and consistent results in the inspection and measurement of 80 DP x 20 degree PA. Has a 1/2 inch bore size and 20 degree pitch angle. 80 DP x 20 degree PA x 160 teeth 2.0013 inch Pitch Diameter, 1/2 inch bore and face width.

]]> https://businessindustrialspline.org/invo-spline-80-dp-x-20-degree-pa-12-inch-bore-master-gear-160-teeth/feed/ 0 https://businessindustrialspline.org/weasler-withs2400-yoke-807-7620-1-34-x-20-clamp-5-35-44mm-bore-20-spline/ https://businessindustrialspline.org/weasler-withs2400-yoke-807-7620-1-34-x-20-clamp-5-35-44mm-bore-20-spline/#comments Mon, 12 Jan 2026 17:58:46 +0000 https://businessindustrialspline.org/weasler-withs2400-yoke-807-7620-1-34-x-20-clamp-5-35-44mm-bore-20-spline/











GENERATIONAL SALES TERMS AND CONDITIONS. Please review the entire description and see all pictures before purchasing. Item will come as pictured. Please see all pictures before purchasing to ensure the item meets your expectations. Item may have minor scratches, scuffs, or dings. Any more serious damages will be pictured and/or listed in the above description. Item includes only what is pictured. Any contents not in the pictures will not come with the item. All part numbers are also pictured. We do our best to picture all items from every angle so you know exactly what you are purchasing. New or Open Box Items. Many of our new items do NOT include the original packaging. Those items that do have the original packaging may have been opened for picturing purposes. Often times the original packaging may have tares, scuffs, or scratches on the cardboard or plastic packaging. If an item includes the original packaging, the packaging will be photographed in the pictures. Many of our re-manufactured items do not show signs of any use but do have aesthetic wear such as scratches, residue, and/or scuffs. Any re-manufactured labels will be included in the pictures. Many of our used items may actually be new/never mounted but have been damaged. All damages will be included in the pictures and/or in the above description. Please review all provided part numbers, pictures, and descriptions to ensure you are purchasing the correct, desired item. Measurements are usually included at the end of the pictures. If you have any questions on an items condition, please message us or see our website for more contact details. For any questions on what an item fits please look up the provided part numbers. All offers, if accepted, are required to pay within 24 hours. Please message us to discuss return options. Please note: we record serial numbers to discourage fraud. Please note that we are not an authorized dealer for any of the products we list online.

]]> https://businessindustrialspline.org/weasler-withs2400-yoke-807-7620-1-34-x-20-clamp-5-35-44mm-bore-20-spline/feed/ 0 https://businessindustrialspline.org/bane-welker-1-14-bore-12-spline-inner-profile-yoke-without-roll-pin-50060544/ https://businessindustrialspline.org/bane-welker-1-14-bore-12-spline-inner-profile-yoke-without-roll-pin-50060544/#comments Mon, 13 Oct 2025 01:37:44 +0000 https://businessindustrialspline.org/bane-welker-1-14-bore-12-spline-inner-profile-yoke-without-roll-pin-50060544/





Does not include roll pin. See pictures for details.

]]> https://businessindustrialspline.org/bane-welker-1-14-bore-12-spline-inner-profile-yoke-without-roll-pin-50060544/feed/ 0 https://businessindustrialspline.org/ktr-rotex-65nsr-ch-nr-used-splined-clamping-jaw-coupling-13-spline-x-45mm-bore/ https://businessindustrialspline.org/ktr-rotex-65nsr-ch-nr-used-splined-clamping-jaw-coupling-13-spline-x-45mm-bore/#comments Sun, 12 Oct 2025 01:35:44 +0000 https://businessindustrialspline.org/ktr-rotex-65nsr-ch-nr-used-splined-clamping-jaw-coupling-13-spline-x-45mm-bore/









KTR Rotex 65+N+SR-CH-NR Splined Clamping Jaw Coupling. Bore measures approximately 45mm at it’s widest. We have two couplers, one has #1952140 and one has K154166 stamped on it. If you have a preference, please let us know and if it’s still available we will try to fill your request.

]]> https://businessindustrialspline.org/ktr-rotex-65nsr-ch-nr-used-splined-clamping-jaw-coupling-13-spline-x-45mm-bore/feed/ 0 https://businessindustrialspline.org/oem-stearns-51672010001e-brake-hub-1d-16-spline-1-125-bore-new/ https://businessindustrialspline.org/oem-stearns-51672010001e-brake-hub-1d-16-spline-1-125-bore-new/#comments Fri, 12 Sep 2025 00:25:42 +0000 https://businessindustrialspline.org/oem-stearns-51672010001e-brake-hub-1d-16-spline-1-125-bore-new/






OEM Stearns 51672010001E Brake Hub, 1D 16 Spline, 1.125 Bore, Revision H. New surplus in factory packaging. The exterior of the factory packaging is dirty from storage but the hub is in new condition.

]]> https://businessindustrialspline.org/oem-stearns-51672010001e-brake-hub-1d-16-spline-1-125-bore-new/feed/ 0