https://businessindustrialspline.org Wed, 13 May 2026 15:16:43 +0000 en-CA hourly 1 https://wordpress.org/?v=4.1.1 https://businessindustrialspline.org/makita-2-ft-rotary-hammer-accepts-spline-bits/ https://businessindustrialspline.org/makita-2-ft-rotary-hammer-accepts-spline-bits/#comments Wed, 03 May 2023 15:12:57 +0000 https://businessindustrialspline.org/makita-2-ft-rotary-hammer-accepts-spline-bits/





Rotary Hammer Accepts Spline Bits. Family Owned & Operated Since 1948. Efficiently and easily add holes to concrete flooring or walls using the 2-Inch Rotary Hammer, Accepts Spline Bits from Makita. It runs on a powerful 11-Amp motor and uses a spline type drive system that puts out up to 2,100 bpm. This rotary hammer features ball-and-needle bearings, offering a longer tool life and smooth operation while also being factory-lubricated to cut down on maintenance. It accepts spline bits for greater versatility and convenience. With a built-in clutch, the gears are disengaged automatically in the event of a bit binding so damage is minimized. Choose hammering only or hammering with rotation mode as needed for the job at hand. Efficiency is improved and overlapping impacts prevented by sequential timing. The motor features durable components and protected by an automatic brush cut-off. Connect to a generator, inverter or other power source using the AC/DC switch. With a large handle that swivels 360 degrees, this Makita 2100 bpm rotary hammer is easy and comfortable to grip. Includes Makita 2-inch spline rotary hammer, wrench, 2 hex wrenches and tool case Powerful 11-Amp motor and spline type drive system generate up to 2,100 bpm Ball-and-needle bearings extend tool life. Acme Tools was founded by George Kuhlman in 1948 as a small electric motor repair shop in downtown Grand Forks, North Dakota. The business was named “ACME” because it represented the highest level or degree attainable – the peak of perfection. The core values back then were simple, offer customers the highest quality products at competitive prices, backed by superior professional service and support. Now two generations and 70 years later, this family owned business has grown to become a major retailer of tools and equipment Today, Acme Tools celebrates 70 years of experience serving customers and continues to be one of the premier retailers of tools and equipment with some of the largest first-class showrooms in the nation and the best online tool store in e-commerce. With ten locations in North Dakota, Minnesota and Iowa, Acme Tools serves the contractor, woodworker and do-it-yourselfer with a wide selection of tools and equipment from all the major manufacturers. WHY SHOP WITH ACME TOOLS? Over 70 years of Industry Experience. Acme Tools has been in business since 1948 and enjoyed over 70 years of business serving the contractor, woodworker and do-it-yourselfer. We are not some start-up company that doesn’t understand the business or your needs. Huge Stock Levels and Vast Selections. We understand that when you need a tool, you need it now. We pride ourselves on having the lowest out of stock rate of anyone in the industry. We support ten retail locations and know from experience that customers want and need full-line availability. Are you satisfied with your order? Need a technical question answered? We may not have all the answers, but we’ll do our best to get you an answer. Our call center is available for expert advice. We are committed to the tool business and we train our sales staff to reflect that commitment, before and after the sale. In addition to fast order processing, we offer some of the best express air rates in the business. Market Leader with new products. We make sure we are first to market when it comes to new products. This item is in the category “Business & Industrial\Light Equipment & Tools\Drills & Hammers\Hammer Drills”. The seller is “acmetools” and is located in this country: US. This item can be shipped to United States.

• Manufacturer Part Number: HR5000
• Type: Tools
• SKU: HR5000
• Item Weight: 35
• UPC: 0088381003360
• EAN: 0088381003360
• Brand: Makita
• Model: HR5000
• MPN: HR5000
• Bit Size: 2\

]]> https://businessindustrialspline.org/makita-2-ft-rotary-hammer-accepts-spline-bits/feed/ 0 https://businessindustrialspline.org/makita-hr4041c-1-916-rotary-hammer-accepts-spline-bits-4/ https://businessindustrialspline.org/makita-hr4041c-1-916-rotary-hammer-accepts-spline-bits-4/#comments Sat, 01 Apr 2023 06:46:19 +0000 https://businessindustrialspline.org/makita-hr4041c-1-916-rotary-hammer-accepts-spline-bits-4/





Makita HR4041C 1-9/16 Rotary Hammer, accepts Spline bits Powerful 11 AMP motor delivers 6.8 ft. Of impact energy to handle the most demanding applications Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs Soft start suppresses start-up reaction for increased accuracy Variable speed control dial enables user to match the speed to the application for greater versatility Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds. This item is in the category “Business & Industrial\Light Equipment & Tools\Drills & Hammers\Hammer Drills”. The seller is “remoremo8811″ and is located in this country: US. This item can be shipped to United States.

• UPC: 689738684371
• EAN: 0689738684371
• Brand: Makita
• Bit Size: See description for details

]]> https://businessindustrialspline.org/makita-hr4041c-1-916-rotary-hammer-accepts-spline-bits-4/feed/ 0 https://businessindustrialspline.org/makita-hr4041c-1-916-rotary-hammer-accepts-spline-bits-3/ https://businessindustrialspline.org/makita-hr4041c-1-916-rotary-hammer-accepts-spline-bits-3/#comments Fri, 01 Oct 2021 08:49:01 +0000 http://businessindustrialspline.org/makita-hr4041c-1-916-rotary-hammer-accepts-spline-bits-3/





The Makita HR4041C 1-9/16 in. Spline-Shank Rotary Hammer Drill features a powerful 11 Amp motor engineered with field-core interlocking steel laminations, a dual ball-bearing armature and a large-surface commutator for an efficient transfer of power. It delivers up to 230 – 460 RPM and 1,300 – 2,600 BPM and has 2 modes for hammering only and hammering with rotation. Soft-start functionality facilitates control and improved accuracy, while sequential impact timing promotes faster work. The Makita HR4041C 1-9/16-inch rotary hammer spline features a powerful 12 amp motor, 1,350-2,750 BPM, and anti-vibration technology for two times less vibration. A low noise level (106dB) and vibration (4.5 m/s2) reduces operator fatigue and increases productivity. The HR4041C also features precision-machined, all-metal gears with more surface contact for more power. Electronic speed control minimizes speed loss when working in heavy applications to ensure maximum productivity. Ideal for drilling through holes, setting anchors, core drilling, and many more applications. Powerful 11 AMP motor delivers 6.8 ft. Of impact energy to handle the most demanding applications. Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs. Soft start suppresses start-up reaction for increased accuracy. Variable speed control dial enables user to match the speed to the application for greater versatility. Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds. Powerful 12 amp motor; 230-460 RPM for the most demanding jobs. Dual-purpose “hammering only” or “rotation with hammering” modes for multiple applications. The item “Makita HR4041C 1-9/16 Rotary Hammer, accepts Spline bits” is in sale since Saturday, March 13, 2021. This item is in the category “Business & Industrial\Light Equipment & Tools\Drills & Hammers\Hammer Drills”. The seller is “anglerdistrictusa” and is located in US. This item can be shipped to United States.

• MPN: HR4041C
• Brand: Makita
• Model: HR4041C

]]> https://businessindustrialspline.org/makita-hr4041c-1-916-rotary-hammer-accepts-spline-bits-3/feed/ 0 https://businessindustrialspline.org/makita-hr4041c-1-916-in-rotary-hammer-accepts-spline-bits/ https://businessindustrialspline.org/makita-hr4041c-1-916-in-rotary-hammer-accepts-spline-bits/#comments Sun, 20 Jun 2021 14:24:48 +0000 http://businessindustrialspline.org/makita-hr4041c-1-916-in-rotary-hammer-accepts-spline-bits/






The Makita 1-9/16-Inch Rotary Hammer, Accepts Spline Bits, gives you the power your demanding jobs require. Its variable speed control selector delivers the right amount of power for the job at hand. The Makita 1-9/16-inch rotary hammer’s clutch limits torque and disengages the gears in case of bit binding to protect them from damage. Two separate modes allow you to hammer only or hammer while rotating. The hammer has a longer lifespan, as it doesn’t hammer while sitting in idle. Bit impacts are synced for faster drilling by a sequential impact timing feature. An automatic brush cut-off minimizes damage to the commutator. Striking accuracy is enhanced by a soft start mechanism. The Makita electric rotary hammer has efficient energy transfer for greater power and a long lifespan. The tool is housed in top quality aluminum for durability. Makita 1-9/16-inch rotary hammer comes with D-handle, side handle, depth gauge and case 12-Amp motor delivers 6.8 foot-pounds of impact energy Variable speed controls deliver the right amount of power Torque-controlling clutch prevents damage to gears Hammer only and hammer while rotating modes provide precise control No hammering in idle extends lifespan. Sequential impact timing feature increases speed. Automatic brush cut-off prevents commutator damage. Makita electric rotary hammer’s soft start mechanism improves accuracy. Optimized energy transfer efficiency improves lifespan and power. The item “Makita-HR4041C 1-9/16 in. Rotary Hammer, Accepts Spline Bits” is in sale since Wednesday, May 12, 2021. This item is in the category “Business & Industrial\Light Equipment & Tools\Drills & Hammers\Hammer Drills”. The seller is “acmetools” and is located in Grand Forks, North Dakota. This item can be shipped to United States.

• Manufacturer Part Number: HR4041C
• Brand: Makita
• Model: HR4041C
• Custom Bundle: No
• MPN: HR4041C

]]> https://businessindustrialspline.org/makita-hr4041c-1-916-in-rotary-hammer-accepts-spline-bits/feed/ 0 https://businessindustrialspline.org/makita-hr4041c-r-1916-rotary-hammer-accepts-spline-bits-reconditioned-2/ https://businessindustrialspline.org/makita-hr4041c-r-1916-rotary-hammer-accepts-spline-bits-reconditioned-2/#comments Fri, 27 Nov 2020 06:52:00 +0000 http://businessindustrialspline.org/makita-hr4041c-r-1916-rotary-hammer-accepts-spline-bits-reconditioned-2/









The Makita HR4041C 1-9/16 in. Spline-Shank Rotary Hammer Drill features a powerful 11 Amp motor engineered with field-core interlocking steel laminations, a dual ball-bearing armature and a large-surface commutator for an efficient transfer of power. It delivers up to 230 – 460 RPM and 1,300 – 2,600 BPM and has 2 modes for hammering only and hammering with rotation. Soft-start functionality facilitates control and improved accuracy, while sequential impact timing promotes faster work. (1) Side Handle (416549-4) (1) Depth Gauge (321248-4) (1) Tool Case (1582578). Technical Data + Specifications. Capacity (concrete drilling): 1-9/16″ Optimum Range (concrete drilling): 1/2″ – 1 Max. Capacity (concrete drilling w/ core bit): 4-5/8 Impact Energy (Joules): 9.2 J Impact Energy ft. : 6.8 Blows Per Minute (variable speed): 1,300 – 2,600 BPM No Load Speed (variable speed): 230 – 460 RPM Vibration Control: No Vibration (m/s²): 15 Overall Length: 16-7/8 Cord Length (ft): 16.4′ Net Weight: 14.8 lbs. Powerful 11 AMP motor delivers 6.8 ft. Of impact energy to handle the most demanding applications. Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs. Soft start suppresses start-up reaction for increased accuracy. Variable speed control dial enables user to match the speed to the application for greater versatility. Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds. One-touch tool retainer action for easy accessory installation and removal. Sequential impact timing delivers timed hammering during rotation to minimize overlapping bit impacts for up to 50% faster drilling. Automatic brush cut-off protects commutator from damage for longer tool life. 2-mode operation for “Hammering Only” or “Hammering with Rotation” for multiple applications. “No hammering when idling” function helps increase tool life. High quality aluminum housing for greater durability and longer tool life. Makita Motor Advantage engineered with field core interlocking steel laminations, dual ball bearing armature and more copper commutator bars, increasing energy transfer efficiency for more power and longer tool life. The item “Makita HR4041C-R 19/16 Rotary Hammer, Accepts Spline Bits (Reconditioned)” is in sale since Wednesday, November 18, 2020. This item is in the category “Business & Industrial\Light Equipment & Tools\Drills & Hammers\Hammer Drills”. The seller is “rafsupply” and is located in Buffalo, New York. This item can be shipped to United States, Canada, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Pakistan, Paraguay, Reunion, Uruguay, Ukraine, Cayman islands.

• Bit Size: 19/16″
• UPC: 0081191070263
• Brand: Makita
• Model: HR4041C
• Custom Bundle: No
• MPN: HR4041C

]]> https://businessindustrialspline.org/makita-hr4041c-r-1916-rotary-hammer-accepts-spline-bits-reconditioned-2/feed/ 0 https://businessindustrialspline.org/makita-hr4041c-r-1916-rotary-hammer-accepts-spline-bits-reconditioned/ https://businessindustrialspline.org/makita-hr4041c-r-1916-rotary-hammer-accepts-spline-bits-reconditioned/#comments Thu, 11 Jun 2020 17:29:48 +0000 http://businessindustrialspline.org/makita-hr4041c-r-1916-rotary-hammer-accepts-spline-bits-reconditioned/









The Makita HR4041C 1-9/16 in. Spline-Shank Rotary Hammer Drill features a powerful 11 Amp motor engineered with field-core interlocking steel laminations, a dual ball-bearing armature and a large-surface commutator for an efficient transfer of power. It delivers up to 230 – 460 RPM and 1,300 – 2,600 BPM and has 2 modes for hammering only and hammering with rotation. Soft-start functionality facilitates control and improved accuracy, while sequential impact timing promotes faster work. (1) Side Handle (416549-4) (1) Depth Gauge (321248-4) (1) Tool Case (1582578). Technical Data + Specifications. Capacity (concrete drilling): 1-9/16″ Optimum Range (concrete drilling): 1/2″ – 1 Max. Capacity (concrete drilling w/ core bit): 4-5/8 Impact Energy (Joules): 9.2 J Impact Energy ft. : 6.8 Blows Per Minute (variable speed): 1,300 – 2,600 BPM No Load Speed (variable speed): 230 – 460 RPM Vibration Control: No Vibration (m/s²): 15 Overall Length: 16-7/8 Cord Length (ft): 16.4′ Net Weight: 14.8 lbs. Powerful 11 AMP motor delivers 6.8 ft. Of impact energy to handle the most demanding applications. Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs. Soft start suppresses start-up reaction for increased accuracy. Variable speed control dial enables user to match the speed to the application for greater versatility. Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds. One-touch tool retainer action for easy accessory installation and removal. Sequential impact timing delivers timed hammering during rotation to minimize overlapping bit impacts for up to 50% faster drilling. Automatic brush cut-off protects commutator from damage for longer tool life. 2-mode operation for “Hammering Only” or “Hammering with Rotation” for multiple applications. “No hammering when idling” function helps increase tool life. High quality aluminum housing for greater durability and longer tool life. Makita Motor Advantage engineered with field core interlocking steel laminations, dual ball bearing armature and more copper commutator bars, increasing energy transfer efficiency for more power and longer tool life. The item “Makita HR4041C-R 19/16 Rotary Hammer, Accepts Spline Bits (Reconditioned)” is in sale since Monday, June 1, 2020. This item is in the category “Business & Industrial\Light Equipment & Tools\Drills & Hammers\Hammer Drills”. The seller is “rafsupply” and is located in Buffalo, New York. This item can be shipped to United States, Canada, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Turks and caicos islands, Bangladesh, Brunei darussalam, Bolivia, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Luxembourg, Monaco, Macao, Martinique, Nicaragua, Pakistan, Paraguay, Uruguay.

• Bit Size: 19/16″
• Brand: Makita
• Model: HR4041C
• Custom Bundle: No
• MPN: HR4041C

]]> https://businessindustrialspline.org/makita-hr4041c-r-1916-rotary-hammer-accepts-spline-bits-reconditioned/feed/ 0 https://businessindustrialspline.org/makita-hr4041c-1-916-rotary-hammer-accepts-spline-bits-2/ https://businessindustrialspline.org/makita-hr4041c-1-916-rotary-hammer-accepts-spline-bits-2/#comments Wed, 25 Jul 2018 15:32:57 +0000 http://businessindustrialspline.org/makita-hr4041c-1-916-rotary-hammer-accepts-spline-bits-2/













Makita HR4041C 1 – 9/16 Rotary Hammer Accepts Spline Bits. Take photos of the exact item that you will get, unless I state otherwise. I try to match CURRENT cheaper price (I dont match past prices). The item “Makita HR4041C 1 9/16 Rotary Hammer Accepts Spline Bits” is in sale since Monday, July 16, 2018. This item is in the category “Business & Industrial\Light Equipment & Tools\Drills & Hammers\Rotary Hammer Drills”. The seller is “topparts8″ and is located in Athens, Georgia. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia.

• Model: HR4041C
• MPN: HR4041C
• Bit Size: 1-9/16″
• Brand: Makita
• Shank Type: Spline

]]> https://businessindustrialspline.org/makita-hr4041c-1-916-rotary-hammer-accepts-spline-bits-2/feed/ 0 https://businessindustrialspline.org/makita-hr4041c-1-916-rotary-hammer-accepts-spline-bits/ https://businessindustrialspline.org/makita-hr4041c-1-916-rotary-hammer-accepts-spline-bits/#comments Fri, 22 Jul 2016 23:23:33 +0000 http://businessindustrialspline.org/makita-hr4041c-1-916-rotary-hammer-accepts-spline-bits/


AMPS (110V): 12.0 Bit Type: Spline Bits Cord Length: 16.4 ft. Overall Length: 16-7/8 Net Weight lbs. : 14.8 INCLUDES: (1) Side Handle (416549-4) (1) Depth Gauge (321248-4) (1) Tool Case. Please call to determine charge. Please Check out our other Auctions. As well as More Information about TOOLSTEAL. The item “Makita HR4041C 1-9/16 Rotary Hammer Accepts Spline Bits” is in sale since Monday, May 23, 2016. This item is in the category “Business & Industrial\Light Equipment & Tools\Drills & Hammers\Rotary Hammer Drills”. The seller is “rafsupply” and is located in Buffalo, New York. This item can be shipped to United States.

• Brand: Makita
• Model: HR4041C
• MPN: HR4041C
• Bit Size: 1-9/16″

]]> https://businessindustrialspline.org/makita-hr4041c-1-916-rotary-hammer-accepts-spline-bits/feed/ 0