https://businessindustrialspline.org Wed, 29 Apr 2026 14:01:46 +0000 en-CA hourly 1 https://wordpress.org/?v=4.1.1 https://businessindustrialspline.org/complete-joint-assembly-for-series-2-outer-tube-tri-lobe-pto-1-38-6-spline/ https://businessindustrialspline.org/complete-joint-assembly-for-series-2-outer-tube-tri-lobe-pto-1-38-6-spline/#comments Mon, 20 Apr 2026 12:00:58 +0000 https://businessindustrialspline.org/complete-joint-assembly-for-series-2-outer-tube-tri-lobe-pto-1-38-6-spline/


Complete Joint Assembly for Series 2 Outer Tube Tri-Lobe PTO, 1 3/8 6-Spline. This assembly contains a 1 3/8 6-spline quick disconnect yoke, universal joint, and a tri-lobe yoke for the outer tube of your PTO. Fits on our Outer Tube for Series 2 PTO. U-joint size: 23.8 x 61.3. Fits Bondioli & Pavesi part number 1G2049007. Listing and template services provided by inkFrog.

]]> https://businessindustrialspline.org/complete-joint-assembly-for-series-2-outer-tube-tri-lobe-pto-1-38-6-spline/feed/ 0 https://businessindustrialspline.org/complete-joint-assembly-for-series-6-outer-tube-tri-lobe-pto-1-38-6-spline/ https://businessindustrialspline.org/complete-joint-assembly-for-series-6-outer-tube-tri-lobe-pto-1-38-6-spline/#comments Wed, 08 Apr 2026 11:34:41 +0000 https://businessindustrialspline.org/complete-joint-assembly-for-series-6-outer-tube-tri-lobe-pto-1-38-6-spline/


Complete Joint Assembly for Series 6 Outer Tube Tri-Lobe PTO, 1 3/8 6-Spline. This assembly contains a 1 3/8 6-spline quick disconnect yoke, universal joint, and a tri-lobe yoke for the outer tube of your PTO. Fits on our Outer Tube for Series 6 PTO. U-joint size: 30.2 x 92. Fits Bondioli & Pavesi part number 1G6049007. Listing and template services provided by inkFrog.

]]> https://businessindustrialspline.org/complete-joint-assembly-for-series-6-outer-tube-tri-lobe-pto-1-38-6-spline/feed/ 0 https://businessindustrialspline.org/194354-loader-hydraulic-6-spline-pump-drive-shaft-fits-ford-new-holland-2n-3/ https://businessindustrialspline.org/194354-loader-hydraulic-6-spline-pump-drive-shaft-fits-ford-new-holland-2n-3/#comments Sun, 22 Mar 2026 07:55:20 +0000 https://businessindustrialspline.org/194354-loader-hydraulic-6-spline-pump-drive-shaft-fits-ford-new-holland-2n-3/













RV / TRAILER / CAMPER. 194354 Loader Hydraulic 6-Spline Pump Drive Shaft Fits Ford New Holland 2N. One New Aftermarket Replacement Fits Ford Hydraulic Pump Drive Shaft Kit that fits Tractor models: 2N, 8N, 9N. Shaft: 13.06″ Long 6 Spline 0.750″ Shaft 0.187 Keyway Hydraulic Pump Hub Adaptor hub (bolts to crankshaft pulley) 3/4 inch Diameter, 6 spline center hole, 2 3/8 inch center-to-center. This measurement is a diagonal(across the diameter) measurement center to center, not from one bolt center to the nearest bolt center Hydraulic Pump Drive Pulley. Sheave has 7/16 front recess to accommodate hub. For Use With Loader Attachment. 4 tapped holes in pulley for mounting pump drive hub Dim A (1) 5.000 Dia. Dim B (2) 1.185 Dia. W/ Threaded Holes Weight: 2.52 lbs Part Numbers: 192161, 192160, 194354. PLEASE SAVE ALL ORIGINAL PACKAGING. If you receive an item that is not as described in the listing. Normally same day if before 1PM EST. Many things can play a factor such as Location, Weather, and the items in the order. If you have any questions, please reach out to us before ordering. How do I know if my order was submitted properly? If you ever have any questions about your order, please message us. Can I return an item that is defective, damaged, or I just don’t want? We Are Your Trusted Aftermarket Tractor Parts Store. We Are Dedicated to Providing You The Highest-Quality Parts & Service at the Most Competitive Prices! Be Sure to Save Our Store to Stay Updated with Exclusive Deals & Offers! We strive to deliver an exceptional shopping experience by providing detailed product information, accurate fitment guidance, and prompt assistance from our knowledgeable support team. Sign up to Newsletter. This listing is currently undergoing maintenance, we apologize for any inconvenience caused.

]]> https://businessindustrialspline.org/194354-loader-hydraulic-6-spline-pump-drive-shaft-fits-ford-new-holland-2n-3/feed/ 0 https://businessindustrialspline.org/versatile-1-38-6-spline-driveline-shaft-43-57-agricultural-use/ https://businessindustrialspline.org/versatile-1-38-6-spline-driveline-shaft-43-57-agricultural-use/#comments Wed, 25 Feb 2026 07:45:49 +0000 https://businessindustrialspline.org/versatile-1-38-6-spline-driveline-shaft-43-57-agricultural-use/








Sturdy and Durable: This PTO shaft is a well-forged series5 driveline shaft with CE certification. It consists of a slip clutch, a solid 20CrMnTi carburized steel universal joint and a Q345 steel tube inside the shield. The PTO shaft is durable and robust when working with various agricultural machinery. 6 Spline Ends: Tractor end: 1-3/8″ x 6 Spline; implement end: 1-3/8″ x 6 Spline. Our brush hog PTO shaft matches perfectly with the same size and type of implements and tractors, providing magnificent driving force for your machinery. Your machinery will be running like never before. Adjustable Length: Compressed Length: 43″; Extended Overall Length: 57″. The tiller PTO shaft is designed with a telescoping steel tube, a universal joint, and yokes. It has 47 Hp, 35 Kw, and 620 Nm torque at 540 rpm, while at 1000 rpm features 77 Hp, 55 Kw, and 500 Nm torque. It allows two sides of the PTO drive line shaft to spin at different speeds. Easy Assembly & Safer Use: As a high-efficient power transmission tool, our PTO extender shaft can be easily assembled for direct replacement. The slip clutch works as an extra security line for the PTO shaft to prevent further damage moving up the line. The security chain and plastic shield eliminate potential dangers in the transmission process. Wide Application: The PTO (Power Take-Off) shaft transfers the power from the tractor to the PTO powered attachment. It is widely used on mowers, rotary tillers, tractors, and more. Control the speed and power of your machine effectively. Powerful torque conversion and reliability will leave you wishing you got our PTO shaft sooner. 1-3/8″ 6-spline ends & 43″-57 & Series 5. This splined PTO shaft is built from sturdy steel and features 6-spline tractor and implement ends. It stands out by its adjustable telescoping tube, strong horsepower, and simple replacement. It can serve as farm power tools to improve your work efficiency significantly. Keep rolling through work, our drive shaft will make sure the job gets done. Easy Assembly & Safer Use. Is a leading brand that specializes in equipment and tools. Along with thousands of motivated employees, is dedicated to providing our customers with tough equipment & tools at incredibly low prices. Today, has occupied markets of more than 200 countries with 10 million plus global members. This T5 tiller PTO shaft is built from high-quality 20CrMnTi carburized steel and Q345 tube steel, with a black-painted surface. It is durable enough to withstand large impacts, higher torque, and high speed. With 43″-57″ extendable length and featuring 1-3/8 6-spline on both tractor and implement ends (include a slip clutch), the PTO link shaft perfectly fits powered farm equipment or machinery of the same size. Our PTO shaft stands out with superior power-transfer ability. At 540 rpm it can provide 47hp, 35kw, and 620 nm torque; 75hp, 55kw, and torque 500 nm at 1000 rpm. The PTO shaft is assembled in a compact structure, consisting of a slip clutch, a telescoping tube, a universal joint, yokes, a plastic shield, and a chain for protection. It allows two speeds on both ends and transfers the power into the equipment. Simple & Quick Installation. The PTO shaft for the bush hug attaches to implement ends and tractors quickly. If you want to cut it to a proper length, please read the manual carefully and remember to deburr the edges after cutting. The PTO shaft, proving robust power force to the PTO powered attachment, is most commonly used on mowers, wood chippers, rotary tillers, rotary cutters, brush cutters, hush hug, tractors, etc. Model: T5-B? P1100mm5.05.05B5FFV1. Part Type: PTO Drive Shaft. Material: 20CrMnTi Carburized Steel + Q345 Steel + Plastic. Tractor End: 1-3/8 x 6 Spline. Implement End: 1-3/8 x 6 Spline. Compressed Length: 43 / 1100 mm. Extended Overall Length: 57 / 1450 mm. At 540RPM: 47hp, 35Kw, 620Nm. At 1000RPM: 75hp, 55Kw, 500Nm. 1 x PTO Shaft. 1 x User Manual.

]]> https://businessindustrialspline.org/versatile-1-38-6-spline-driveline-shaft-43-57-agricultural-use/feed/ 0 https://businessindustrialspline.org/walterscheid-pto-half-shaft-category-4-1-38-6-spline-tractor-end-series/ https://businessindustrialspline.org/walterscheid-pto-half-shaft-category-4-1-38-6-spline-tractor-end-series/#comments Sun, 01 Feb 2026 18:46:44 +0000 https://businessindustrialspline.org/walterscheid-pto-half-shaft-category-4-1-38-6-spline-tractor-end-series/









Genuine Walterscheid Category 4 PTO Half Shaft – New Open Box. This is a New, Never Used Walterscheid Series 2400 tractor-side PTO half shaft. It is “Open Box” because the original cardboard packaging was removed or damaged; however, the shaft itself is in pristine factory condition and has never been mounted or grease-cycled. 6-Spline yoke with a spring-loaded quick-disconnect collar. Heavy-Duty Joint: Equipped with the “EG 60″ U-joint cross. Profile Tubing: Features the high-torque Walterscheid “Lemon” inner profile tube. Full Safety Guarding: Includes the complete yellow safety bell and non-rotating shield assembly with a safety anchor chain. OEM Quality: Genuine German-engineered component, superior to generic aftermarket drivelines. Because this is a metric Category 4 (Series 2400) component, it is widely cross-referenced by major tractor and implement brands. Quick-Disconnect Yoke (ASGE 2400). Universal Joint / Cross Kit. Complete Assembly / Cross Kit. Cross and Bearing Kit. 1-3/8 6-Spline Tractor Yoke. Series 2400 Cross Reference. Compatible Equipment Makes & Models. The 1 3/8 6-Spline tractor-end connection is the standard 540 RPM size for most utility and row-crop tractors under 100 HP. John Deere: 5000 Series (5045E, 5075M), 6000 Series (6105D, 6120M). Kubota: M-Series (M7060, M5-111). New Holland: Workmaster, PowerStar, and T5 Series. Massey Ferguson: 4700 and 5700 Series. This Category 4 shaft is typically found on high-torque implements that require more durability than standard “homeowner” grade Category 1 or 2 shafts. Rotary cutters, Rhino finish mowers, and Woods Batwing cutters (inner wing shafts). Hay Equipment: Kuhn and Krone disc mowers, tedders, and rotary rakes. Specialty Implements: Vermeer balers, Capello corn heads, fertilizer spreaders, and heavy-duty snowblowers. Save significantly over dealership retail prices due to open-box status. Be sure to check our feedback! We have nothing to hide! We’re very proud of our products and services. We provide honest and accurate descriptions for our items. If any of our products have blemishes or are in less than new condition, those imperfections are highlighted in the photos and descriptions, so you always know what you’re are getting. Once an item is listed, we package and store it in a managed warehouse. We also select trucking companies that have reliably picked up our items when scheduled. Most boxes have been opened for inspection and photos. If items are listed as new, they may not come with original packaging. You will receive exactly what is in the pictures. If it’s not in the pictures, it’s not included. We try to accurately describe all items including marks or defects, if any. Please let me know of any mistakes. When we post our ads, we select shippers that would be the most cost-effective and expeditious. However, prices or conditions often change when we sell the item, so we reserve the right to select different, but cost-effective and expeditious shippers at that time. Thanks in advance for your order and for shopping at Cox Industrial Supplies.

]]> https://businessindustrialspline.org/walterscheid-pto-half-shaft-category-4-1-38-6-spline-tractor-end-series/feed/ 0 https://businessindustrialspline.org/hypro-9910-kit1704-1-38-6-spline-female-pto-shaft-kit-for-d30-d50-d403-pumps/ https://businessindustrialspline.org/hypro-9910-kit1704-1-38-6-spline-female-pto-shaft-kit-for-d30-d50-d403-pumps/#comments Sun, 04 Jan 2026 05:38:44 +0000 https://businessindustrialspline.org/hypro-9910-kit1704-1-38-6-spline-female-pto-shaft-kit-for-d30-d50-d403-pumps/







Crafted by Hypro Manufacturing, the Hypro 9910-KIT1704 is a robust 1-3/8 6-spline female PTO shaft kit designed for durability and compatibility with D30, D50, and D403 pumps. The kit features precision engineering, allowing for smooth operation and reliable performance in various agricultural and industrial applications. Proudly made in the United States, this kit model ensures quality and adherence to high manufacturing standards. It is an essential component for those in need of hydraulic pump parts, offering a direct fit solution for efficient system functionality.

]]> https://businessindustrialspline.org/hypro-9910-kit1704-1-38-6-spline-female-pto-shaft-kit-for-d30-d50-d403-pumps/feed/ 0 https://businessindustrialspline.org/complete-joint-assembly-for-series-1-outer-tube-tri-lobe-pto-1-38-6-spline/ https://businessindustrialspline.org/complete-joint-assembly-for-series-1-outer-tube-tri-lobe-pto-1-38-6-spline/#comments Mon, 01 Sep 2025 06:53:03 +0000 https://businessindustrialspline.org/complete-joint-assembly-for-series-1-outer-tube-tri-lobe-pto-1-38-6-spline/


Complete Joint Assembly for Series 1 Outer Tube Tri-Lobe PTO, 1 3/8 6-Spline. This assembly contains a 1 3/8 6-spline quick disconnect yoke, universal joint, and a tri-lobe yoke for the outer tube of your PTO. Fits on our Outer Tube for Series 1 PTO. U-joint size: 22 x 54. Fits Bondioli & Pavesi part number 1G1049007. Listing and template services provided by inkFrog.

]]> https://businessindustrialspline.org/complete-joint-assembly-for-series-1-outer-tube-tri-lobe-pto-1-38-6-spline/feed/ 0 https://businessindustrialspline.org/perfection-gear-11-ratio-20hp-1750rpm-right-angle-gear-reducer-1-14-6-spline/ https://businessindustrialspline.org/perfection-gear-11-ratio-20hp-1750rpm-right-angle-gear-reducer-1-14-6-spline/#comments Sun, 09 Mar 2025 07:48:46 +0000 https://businessindustrialspline.org/perfection-gear-11-ratio-20hp-1750rpm-right-angle-gear-reducer-1-14-6-spline/









Perfection Gear 1:1 Ratio 20HP 1750RPM Right Angle Gear Reducer 1-1/4 6-Spline. Input Shaft Diameter: 1.000. Vent: Not vented, will need to be vented prior to use. Output Shaft Diameter: 1-1/4 6-spline. Output Torque (lbs): 720. THIS IS A USED GEAR REDUCER. I BELIEVE IT HAS BEEN REBUILT. MOUNTING HOLE PATTERN IS 6X6″ WITH 9/16″ HOLES. CENTERLINE OF SPLINED SHAFT IS 3.500 ABOVE MOUNTING FLANGE. It is a residential address. It is an agricultural address. Your business property also has a residence. You are a business surrounded by residential or agricultural area. You are a stand-alone business or one of only a few businesses miles from other commercial hubs. Our carriers will consider your address limited access if it is a: Cemetery, Church, Country Club, Farm, Golf Club, Hotel, Mall/Shopping Center, Mine, Park, Prison/Correctional Facility, School/College/University, Storage Facility or a utility site. Our carriers will also consider your address limited access if. A semi truck can not easily pull into and turn around. A semi truck must park on the road. A semi truck has to back in off the road. Please call ahead so we have time to pull your items from our Inventory. Thank you for your time and we look forward to serving you.

]]> https://businessindustrialspline.org/perfection-gear-11-ratio-20hp-1750rpm-right-angle-gear-reducer-1-14-6-spline/feed/ 0 https://businessindustrialspline.org/genuine-weasler-560-6006-universal-friction-clutch-1-38-in-x-6-spline/ https://businessindustrialspline.org/genuine-weasler-560-6006-universal-friction-clutch-1-38-in-x-6-spline/#comments Thu, 28 Nov 2024 20:46:08 +0000 https://businessindustrialspline.org/genuine-weasler-560-6006-universal-friction-clutch-1-38-in-x-6-spline/







For YOU, we constantly strive to find ways to improve our performance.

]]> https://businessindustrialspline.org/genuine-weasler-560-6006-universal-friction-clutch-1-38-in-x-6-spline/feed/ 0 https://businessindustrialspline.org/new-parker-tb0195gm110aaaa-torque-motor-1-6-spline-shaft/ https://businessindustrialspline.org/new-parker-tb0195gm110aaaa-torque-motor-1-6-spline-shaft/#comments Tue, 10 Sep 2024 14:48:50 +0000 https://businessindustrialspline.org/new-parker-tb0195gm110aaaa-torque-motor-1-6-spline-shaft/













New Parker TB0195GM110AAAA Torque Motor 1 6-Spline Shaft. See pictures to see actual part available. New, unused as shown in the photographs. Message me with any questions.

]]> https://businessindustrialspline.org/new-parker-tb0195gm110aaaa-torque-motor-1-6-spline-shaft/feed/ 0