https://businessindustrialspline.org Fri, 01 May 2026 02:07:38 +0000 en-CA hourly 1 https://wordpress.org/?v=4.1.1 https://businessindustrialspline.org/titan-gearbox-shearpin-45hp-fits-45-mowers-12-spline-many-brands/ https://businessindustrialspline.org/titan-gearbox-shearpin-45hp-fits-45-mowers-12-spline-many-brands/#comments Sat, 28 Mar 2026 08:13:44 +0000 https://businessindustrialspline.org/titan-gearbox-shearpin-45hp-fits-45-mowers-12-spline-many-brands/







Hours 7:30 to 5:00 EST M-F till noon on Saturday. This gearbox fits several different makes of 4′, 5′ and some 6′ rotary cutters. I sell a lot of these boxes every year for several different applications and carry ALL REPLACEMENT PARTS for this box, but hopefully you won’t have to worry about that. Here are the specs on the box. 45 horse power gearbox. Standard 1-3/8 smooth input shaft(where the pto shaft hooks on). The pto shaft is held on by a 1/2 shearbolt. Length of the input shaft out of the gearbox is 3 long. Gear Ratio: 1 to 1.47. Bolt hole pattern for mounting is on the corners, 4-3/4 center of hole to center of hole. It takes a 5/8 bolt. 12 splined output shaft(where the blade carrier hooks up on the bottom). 1-9/16 outside measurement over the output shaft splines- from the base of the output cap to the end of the splines is 2-3/4″ long- overall length of the output shaft is 4-1/2″ long. Takes a 1 threaded castle nut and a carter key on the bottom of the output shaft to secure blade pan(which is included). Overall height of the box from the top of the mower deck to the top of the box is 9-1/2. It takes 80-90 gear oil. Look at the pictures and the one of the back of the gearbox, you will see a plug on the top and a small little pipe plug on the bottom right side. The top hole is where you put the oil in, you take out the pipe plug and as you pour the oil in and when it starts running out of the pipe plug hole then it is full. You only fill the box roughly half way, if you overfill the breather plug will release some of the pressure but you also run the risk of blowing out one of your oil seals so try to maintain adequate oil levels. Of course you do this with the box mounted and in an upright position. We stock all parts for everything we sell. Thank you and God bless.

]]> https://businessindustrialspline.org/titan-gearbox-shearpin-45hp-fits-45-mowers-12-spline-many-brands/feed/ 0 https://businessindustrialspline.org/j-bar-gearbox-shearpin-45hp-fits-45-mowers-12-spline-many-brands/ https://businessindustrialspline.org/j-bar-gearbox-shearpin-45hp-fits-45-mowers-12-spline-many-brands/#comments Tue, 25 Sep 2018 00:45:02 +0000 http://businessindustrialspline.org/j-bar-gearbox-shearpin-45hp-fits-45-mowers-12-spline-many-brands/







Get Vendio Gallery – Now FREE! 389 West Meadowlake Parkway. Hours 7:30 to 5:00 EST M-F till noon on Saturday. This gearbox fits several different makes of 4′, 5′ and some 6′ rotary cutters. I sell a lot of these boxes every year for several different applications and carry ALL REPLACEMENT PARTS for this box, but hopefully you won’t have to worry about that. Here are the specs on the box. 45 horse power gearbox. Standard 1-3/8 smooth input shaft(where the pto shaft hooks on). The pto shaft is held on by a 1/2 shearbolt. Length of the input shaft out of the gearbox is 3 long. Gear Ratio: 1 to 1.47. Bolt hole pattern for mounting is on the corners, 4-3/4 center of hole to center of hole. It takes a 5/8 bolt. 12 splined output shaft(where the blade carrier hooks up on the bottom). 1-9/16 outside measurement over the output shaft splines- from the base of the output cap to the end of the splines is 2-3/4″ long- overall length of the output shaft is 4-1/2″ long. Takes a 1 threaded castle nut and a carter key on the bottom of the output shaft to secure blade pan(which is included). Overall height of the box from the top of the mower deck to the top of the box is 9-1/2. It takes 80-90 gear oil. Look at the pictures and the one of the back of the gearbox, you will see a plug on the top and a small little pipe plug on the bottom right side. The top hole is where you put the oil in, you take out the pipe plug and as you pour the oil in and when it starts running out of the pipe plug hole then it is full. You only fill the box roughly half way, if you overfill the breather plug will release some of the pressure but you also run the risk of blowing out one of your oil seals so try to maintain adequate oil levels. Of course you do this with the box mounted and in an upright position. We stock all parts for everything we sell. Thank you and God bless. Add a map to your own listings. The item “J BAR GEARBOX, SHEARPIN-45HP FITS 4’&5′ MOWERS 12 SPLINE MANY BRANDS” is in sale since Thursday, December 14, 2017. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment Attachments\Mower Decks”. The seller is “gaequip” and is located in Swainsboro, Georgia. This item can be shipped to United States.

• Modified Item: No
• Custom Bundle: No
• Brand: HOWSE BUSHHOG KODIAK MODERN LOWREY KING KUTTER
• Non-Domestic Product: No
• INPUT: SHEARPIN
• OUTPUT: 12 SPLINE

]]> https://businessindustrialspline.org/j-bar-gearbox-shearpin-45hp-fits-45-mowers-12-spline-many-brands/feed/ 0 https://businessindustrialspline.org/modern-ag-gearbox-shearpin-45hp-fits-45-mowers-12-spline-many-brands/ https://businessindustrialspline.org/modern-ag-gearbox-shearpin-45hp-fits-45-mowers-12-spline-many-brands/#comments Tue, 11 Sep 2018 10:29:09 +0000 http://businessindustrialspline.org/modern-ag-gearbox-shearpin-45hp-fits-45-mowers-12-spline-many-brands/







Get Vendio Gallery – Now FREE! 389 West Meadowlake Parkway. Hours 7:30 to 5:00 EST M-F till noon on Saturday. This gearbox fits several different makes of 4′, 5′ and some 6′ rotary cutters. I sell a lot of these boxes every year for several different applications and carry ALL REPLACEMENT PARTS for this box, but hopefully you won’t have to worry about that. Here are the specs on the box. 45 horse power gearbox. Standard 1-3/8 smooth input shaft(where the pto shaft hooks on). The pto shaft is held on by a 1/2 shearbolt. Length of the input shaft out of the gearbox is 3 long. Gear Ratio: 1 to 1.47. Bolt hole pattern for mounting is on the corners, 4-3/4 center of hole to center of hole. It takes a 5/8 bolt. 12 splined output shaft(where the blade carrier hooks up on the bottom). 1-9/16 outside measurement over the output shaft splines- from the base of the output cap to the end of the splines is 2-3/4″ long- overall length of the output shaft is 4-1/2″ long. Takes a 1 threaded castle nut and a carter key on the bottom of the output shaft to secure blade pan(which is included). Overall height of the box from the top of the mower deck to the top of the box is 9-1/2. It takes 80-90 gear oil. Look at the pictures and the one of the back of the gearbox, you will see a plug on the top and a small little pipe plug on the bottom right side. The top hole is where you put the oil in, you take out the pipe plug and as you pour the oil in and when it starts running out of the pipe plug hole then it is full. You only fill the box roughly half way, if you overfill the breather plug will release some of the pressure but you also run the risk of blowing out one of your oil seals so try to maintain adequate oil levels. Of course you do this with the box mounted and in an upright position. We stock all parts for everything we sell. Thank you and God bless. Add a map to your own listings. The item “MODERN AG GEARBOX, SHEARPIN-45HP FITS 4’&5′ MOWERS 12 SPLINE MANY BRANDS” is in sale since Thursday, December 14, 2017. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment Attachments\Mower Decks”. The seller is “gaequip” and is located in Swainsboro, Georgia. This item can be shipped to United States.

• Modified Item: No
• Custom Bundle: No
• Brand: HOWSE BUSHHOG KODIAK MODERN LOWREY KING KUTTER
• Non-Domestic Product: No
• INPUT: SHEARPIN
• OUTPUT: 12 SPLINE

]]> https://businessindustrialspline.org/modern-ag-gearbox-shearpin-45hp-fits-45-mowers-12-spline-many-brands/feed/ 0 https://businessindustrialspline.org/silver-edge-gearbox-shearpin-45hp-fits-45-mowers-12-spline-many-brands/ https://businessindustrialspline.org/silver-edge-gearbox-shearpin-45hp-fits-45-mowers-12-spline-many-brands/#comments Tue, 17 Jul 2018 14:57:40 +0000 http://businessindustrialspline.org/silver-edge-gearbox-shearpin-45hp-fits-45-mowers-12-spline-many-brands/







Get Vendio Gallery – Now FREE! 389 West Meadowlake Parkway. Hours 7:30 to 5:00 EST M-F till noon on Saturday. This gearbox fits several different makes of 4′, 5′ and some 6′ rotary cutters. I sell a lot of these boxes every year for several different applications and carry ALL REPLACEMENT PARTS for this box, but hopefully you won’t have to worry about that. Here are the specs on the box. 45 horse power gearbox. Standard 1-3/8 smooth input shaft(where the pto shaft hooks on). The pto shaft is held on by a 1/2 shearbolt. Length of the input shaft out of the gearbox is 3 long. Gear Ratio: 1 to 1.47. Bolt hole pattern for mounting is on the corners, 4-3/4 center of hole to center of hole. It takes a 5/8 bolt. 12 splined output shaft(where the blade carrier hooks up on the bottom). 1-9/16 outside measurement over the output shaft splines- from the base of the output cap to the end of the splines is 2-3/4″ long- overall length of the output shaft is 4-1/2″ long. Takes a 1 threaded castle nut and a carter key on the bottom of the output shaft to secure blade pan(which is included). Overall height of the box from the top of the mower deck to the top of the box is 9-1/2. It takes 80-90 gear oil. Look at the pictures and the one of the back of the gearbox, you will see a plug on the top and a small little pipe plug on the bottom right side. The top hole is where you put the oil in, you take out the pipe plug and as you pour the oil in and when it starts running out of the pipe plug hole then it is full. You only fill the box roughly half way, if you overfill the breather plug will release some of the pressure but you also run the risk of blowing out one of your oil seals so try to maintain adequate oil levels. Of course you do this with the box mounted and in an upright position. We stock all parts for everything we sell. Thank you and God bless. Add a map to your own listings. The item “SILVER EDGE GEARBOX, SHEARPIN-45HP FITS 4’&5′ MOWERS 12 SPLINE MANY BRANDS” is in sale since Thursday, December 14, 2017. This item is in the category “Business & Industrial\Heavy Equipment Attachments\Mower Decks”. The seller is “gaequip” and is located in Swainsboro, Georgia. This item can be shipped to United States.

• Brand: HOWSE BUSHHOG KODIAK MODERN LOWREY KING KUTTER
• INPUT: SHEARPIN
• OUTPUT: 12 SPLINE

]]> https://businessindustrialspline.org/silver-edge-gearbox-shearpin-45hp-fits-45-mowers-12-spline-many-brands/feed/ 0 https://businessindustrialspline.org/howse-gearbox-shearpin-45hp-fits-45-mowers-12-spline-many-brands/ https://businessindustrialspline.org/howse-gearbox-shearpin-45hp-fits-45-mowers-12-spline-many-brands/#comments Mon, 25 Jun 2018 13:50:27 +0000 http://businessindustrialspline.org/howse-gearbox-shearpin-45hp-fits-45-mowers-12-spline-many-brands/







Get Vendio Gallery – Now FREE! 389 West Meadowlake Parkway. Hours 7:30 to 5:00 EST M-F till noon on Saturday. This gearbox fits several different makes of 4′, 5′ and some 6′ rotary cutters. I sell a lot of these boxes every year for several different applications and carry ALL REPLACEMENT PARTS for this box, but hopefully you won’t have to worry about that. Here are the specs on the box. 45 horse power gearbox. Standard 1-3/8 smooth input shaft(where the pto shaft hooks on). The pto shaft is held on by a 1/2 shearbolt. Length of the input shaft out of the gearbox is 3 long. Gear Ratio: 1 to 1.47. Bolt hole pattern for mounting is on the corners, 4-3/4 center of hole to center of hole. It takes a 5/8 bolt. 12 splined output shaft(where the blade carrier hooks up on the bottom). 1-9/16 outside measurement over the output shaft splines- from the base of the output cap to the end of the splines is 2-3/4″ long- overall length of the output shaft is 4-1/2″ long. Takes a 1 threaded castle nut and a carter key on the bottom of the output shaft to secure blade pan(which is included). Overall height of the box from the top of the mower deck to the top of the box is 9-1/2. It takes 80-90 gear oil. Look at the pictures and the one of the back of the gearbox, you will see a plug on the top and a small little pipe plug on the bottom right side. The top hole is where you put the oil in, you take out the pipe plug and as you pour the oil in and when it starts running out of the pipe plug hole then it is full. You only fill the box roughly half way, if you overfill the breather plug will release some of the pressure but you also run the risk of blowing out one of your oil seals so try to maintain adequate oil levels. Of course you do this with the box mounted and in an upright position. We stock all parts for everything we sell. Thank you and God bless. Add a map to your own listings. The item “HOWSE GEARBOX, SHEARPIN-45HP FITS 4’&5′ MOWERS 12 SPLINE MANY BRANDS” is in sale since Thursday, December 14, 2017. This item is in the category “Business & Industrial\Heavy Equipment Attachments\Mower Decks”. The seller is “gaequip” and is located in Swainsboro, Georgia. This item can be shipped to United States.

• Brand: HOWSE BUSHHOG KODIAK MODERN LOWREY KING KUTTER
• INPUT: SHEARPIN
• OUTPUT: 12 SPLINE

]]> https://businessindustrialspline.org/howse-gearbox-shearpin-45hp-fits-45-mowers-12-spline-many-brands/feed/ 0 https://businessindustrialspline.org/county-line-gearbox-shearpin-45hp-fits-45-mowers-12-spline-many-brands/ https://businessindustrialspline.org/county-line-gearbox-shearpin-45hp-fits-45-mowers-12-spline-many-brands/#comments Tue, 22 May 2018 23:19:19 +0000 http://businessindustrialspline.org/county-line-gearbox-shearpin-45hp-fits-45-mowers-12-spline-many-brands/







Get Vendio Gallery – Now FREE! 389 West Meadowlake Parkway. Hours 7:30 to 5:00 EST M-F till noon on Saturday. This gearbox fits several different makes of 4′, 5′ and some 6′ rotary cutters. I sell a lot of these boxes every year for several different applications and carry ALL REPLACEMENT PARTS for this box, but hopefully you won’t have to worry about that. Here are the specs on the box. 45 horse power gearbox. Standard 1-3/8 smooth input shaft(where the pto shaft hooks on). The pto shaft is held on by a 1/2 shearbolt. Length of the input shaft out of the gearbox is 3 long. Gear Ratio: 1 to 1.47. Bolt hole pattern for mounting is on the corners, 4-3/4 center of hole to center of hole. It takes a 5/8 bolt. 12 splined output shaft(where the blade carrier hooks up on the bottom). 1-9/16 outside measurement over the output shaft splines- from the base of the output cap to the end of the splines is 2-3/4″ long- overall length of the output shaft is 4-1/2″ long. Takes a 1 threaded castle nut and a carter key on the bottom of the output shaft to secure blade pan(which is included). Overall height of the box from the top of the mower deck to the top of the box is 9-1/2. It takes 80-90 gear oil. Look at the pictures and the one of the back of the gearbox, you will see a plug on the top and a small little pipe plug on the bottom right side. The top hole is where you put the oil in, you take out the pipe plug and as you pour the oil in and when it starts running out of the pipe plug hole then it is full. You only fill the box roughly half way, if you overfill the breather plug will release some of the pressure but you also run the risk of blowing out one of your oil seals so try to maintain adequate oil levels. Of course you do this with the box mounted and in an upright position. We stock all parts for everything we sell. Thank you and God bless. Add a map to your own listings. The item “COUNTY LINE GEARBOX, SHEARPIN-45HP FITS 4’&5′ MOWERS 12 SPLINE MANY BRANDS” is in sale since Thursday, December 14, 2017. This item is in the category “Business & Industrial\Heavy Equipment Attachments\Mower Decks”. The seller is “gaequip” and is located in Swainsboro, Georgia. This item can be shipped to United States.

• Brand: HOWSE BUSHHOG KODIAK MODERN LOWREY KING KUTTER
• INPUT: SHEARPIN
• OUTPUT: 12 SPLINE

]]> https://businessindustrialspline.org/county-line-gearbox-shearpin-45hp-fits-45-mowers-12-spline-many-brands/feed/ 0 https://businessindustrialspline.org/kodiak-gearbox-shearpin-45hp-fits-45-mowers-12-spline-many-brands/ https://businessindustrialspline.org/kodiak-gearbox-shearpin-45hp-fits-45-mowers-12-spline-many-brands/#comments Thu, 26 Apr 2018 20:10:13 +0000 http://businessindustrialspline.org/kodiak-gearbox-shearpin-45hp-fits-45-mowers-12-spline-many-brands/







Get Vendio Gallery – Now FREE! 389 West Meadowlake Parkway. Hours 7:30 to 5:00 EST M-F till noon on Saturday. This gearbox fits several different makes of 4′, 5′ and some 6′ rotary cutters. I sell a lot of these boxes every year for several different applications and carry ALL REPLACEMENT PARTS for this box, but hopefully you won’t have to worry about that. Here are the specs on the box. 45 horse power gearbox. Standard 1-3/8 smooth input shaft(where the pto shaft hooks on). The pto shaft is held on by a 1/2 shearbolt. Length of the input shaft out of the gearbox is 3 long. Gear Ratio: 1 to 1.47. Bolt hole pattern for mounting is on the corners, 4-3/4 center of hole to center of hole. It takes a 5/8 bolt. 12 splined output shaft(where the blade carrier hooks up on the bottom). 1-9/16 outside measurement over the output shaft splines- from the base of the output cap to the end of the splines is 2-3/4″ long- overall length of the output shaft is 4-1/2″ long. Takes a 1 threaded castle nut and a carter key on the bottom of the output shaft to secure blade pan(which is included). Overall height of the box from the top of the mower deck to the top of the box is 9-1/2. It takes 80-90 gear oil. Look at the pictures and the one of the back of the gearbox, you will see a plug on the top and a small little pipe plug on the bottom right side. The top hole is where you put the oil in, you take out the pipe plug and as you pour the oil in and when it starts running out of the pipe plug hole then it is full. You only fill the box roughly half way, if you overfill the breather plug will release some of the pressure but you also run the risk of blowing out one of your oil seals so try to maintain adequate oil levels. Of course you do this with the box mounted and in an upright position. We stock all parts for everything we sell. Thank you and God bless. Add a map to your own listings. The item “KODIAK GEARBOX, SHEARPIN-45HP FITS 4’&5′ MOWERS 12 SPLINE MANY BRANDS” is in sale since Thursday, December 14, 2017. This item is in the category “Business & Industrial\Heavy Equipment Attachments\Mower Decks”. The seller is “gaequip” and is located in Swainsboro, Georgia. This item can be shipped to United States.

• Brand: HOWSE BUSHHOG KODIAK MODERN LOWREY KING KUTTER
• INPUT: SHEARPIN
• OUTPUT: 12 SPLINE

]]> https://businessindustrialspline.org/kodiak-gearbox-shearpin-45hp-fits-45-mowers-12-spline-many-brands/feed/ 0 https://businessindustrialspline.org/lmc-gearbox-shearpin-45hp-fits-45-mowers-12-spline-many-brands/ https://businessindustrialspline.org/lmc-gearbox-shearpin-45hp-fits-45-mowers-12-spline-many-brands/#comments Sun, 15 Apr 2018 07:34:35 +0000 http://businessindustrialspline.org/lmc-gearbox-shearpin-45hp-fits-45-mowers-12-spline-many-brands/







Get Vendio Gallery – Now FREE! 389 West Meadowlake Parkway. Hours 7:30 to 5:00 EST M-F till noon on Saturday. This gearbox fits several different makes of 4′, 5′ and some 6′ rotary cutters. I sell a lot of these boxes every year for several different applications and carry ALL REPLACEMENT PARTS for this box, but hopefully you won’t have to worry about that. Here are the specs on the box. 45 horse power gearbox. Standard 1-3/8 smooth input shaft(where the pto shaft hooks on). The pto shaft is held on by a 1/2 shearbolt. Length of the input shaft out of the gearbox is 3 long. Gear Ratio: 1 to 1.47. Bolt hole pattern for mounting is on the corners, 4-3/4 center of hole to center of hole. It takes a 5/8 bolt. 12 splined output shaft(where the blade carrier hooks up on the bottom). 1-9/16 outside measurement over the output shaft splines- from the base of the output cap to the end of the splines is 2-3/4″ long- overall length of the output shaft is 4-1/2″ long. Takes a 1 threaded castle nut and a carter key on the bottom of the output shaft to secure blade pan(which is included). Overall height of the box from the top of the mower deck to the top of the box is 9-1/2. It takes 80-90 gear oil. Look at the pictures and the one of the back of the gearbox, you will see a plug on the top and a small little pipe plug on the bottom right side. The top hole is where you put the oil in, you take out the pipe plug and as you pour the oil in and when it starts running out of the pipe plug hole then it is full. You only fill the box roughly half way, if you overfill the breather plug will release some of the pressure but you also run the risk of blowing out one of your oil seals so try to maintain adequate oil levels. Of course you do this with the box mounted and in an upright position. We stock all parts for everything we sell. Thank you and God bless. Add a map to your own listings. The item “LMC GEARBOX, SHEARPIN-45HP FITS 4’&5′ MOWERS 12 SPLINE MANY BRANDS” is in sale since Thursday, December 14, 2017. This item is in the category “Business & Industrial\Heavy Equipment Attachments\Mower Decks”. The seller is “gaequip” and is located in Swainsboro, Georgia. This item can be shipped to United States.

• Brand: HOWSE BUSHHOG KODIAK MODERN LOWREY KING KUTTER
• INPUT: SHEARPIN
• OUTPUT: 12 SPLINE

]]> https://businessindustrialspline.org/lmc-gearbox-shearpin-45hp-fits-45-mowers-12-spline-many-brands/feed/ 0 https://businessindustrialspline.org/bush-hog-gearbox-shearpin-45hp-fits-45-mowers-12-spline-many-brands/ https://businessindustrialspline.org/bush-hog-gearbox-shearpin-45hp-fits-45-mowers-12-spline-many-brands/#comments Fri, 23 Feb 2018 16:34:44 +0000 http://businessindustrialspline.org/bush-hog-gearbox-shearpin-45hp-fits-45-mowers-12-spline-many-brands/







Get Vendio Gallery – Now FREE! 389 West Meadowlake Parkway. Hours 7:30 to 5:00 EST M-F till noon on Saturday. This gearbox fits several different makes of 4′, 5′ and some 6′ rotary cutters. I sell a lot of these boxes every year for several different applications and carry ALL REPLACEMENT PARTS for this box, but hopefully you won’t have to worry about that. Here are the specs on the box. 45 horse power gearbox. Standard 1-3/8 smooth input shaft(where the pto shaft hooks on). The pto shaft is held on by a 1/2 shearbolt. Length of the input shaft out of the gearbox is 3 long. Gear Ratio: 1 to 1.47. Bolt hole pattern for mounting is on the corners, 4-3/4 center of hole to center of hole. It takes a 5/8 bolt. 12 splined output shaft(where the blade carrier hooks up on the bottom). 1-9/16 outside measurement over the output shaft splines- from the base of the output cap to the end of the splines is 2-3/4″ long- overall length of the output shaft is 4-1/2″ long. Takes a 1 threaded castle nut and a carter key on the bottom of the output shaft to secure blade pan(which is included). Overall height of the box from the top of the mower deck to the top of the box is 9-1/2. It takes 80-90 gear oil. Look at the pictures and the one of the back of the gearbox, you will see a plug on the top and a small little pipe plug on the bottom right side. The top hole is where you put the oil in, you take out the pipe plug and as you pour the oil in and when it starts running out of the pipe plug hole then it is full. You only fill the box roughly half way, if you overfill the breather plug will release some of the pressure but you also run the risk of blowing out one of your oil seals so try to maintain adequate oil levels. Of course you do this with the box mounted and in an upright position. We stock all parts for everything we sell. Thank you and God bless. Add a map to your own listings. The item “BUSH HOG GEARBOX, SHEARPIN-45HP FITS 4’&5′ MOWERS 12 SPLINE MANY BRANDS” is in sale since Thursday, December 14, 2017. This item is in the category “Business & Industrial\Heavy Equipment Attachments\Mower Decks”. The seller is “gaequip” and is located in Swainsboro, Georgia. This item can be shipped to United States.

• Brand: HOWSE BUSHHOG KODIAK MODERN LOWREY KING KUTTER
• INPUT: SHEARPIN
• OUTPUT: 12 SPLINE

]]> https://businessindustrialspline.org/bush-hog-gearbox-shearpin-45hp-fits-45-mowers-12-spline-many-brands/feed/ 0