https://businessindustrialspline.org Tue, 04 Aug 2026 07:54:41 +0000 en-CA hourly 1 https://wordpress.org/?v=4.1.1 https://businessindustrialspline.org/heavy-duty-slip-clutch-pto-shaft-for-7-rotary-mowers-with-1-38-6-splined/ https://businessindustrialspline.org/heavy-duty-slip-clutch-pto-shaft-for-7-rotary-mowers-with-1-38-6-splined/#comments Wed, 10 Jun 2026 17:12:46 +0000 https://businessindustrialspline.org/heavy-duty-slip-clutch-pto-shaft-for-7-rotary-mowers-with-1-38-6-splined/




Hours 7:30 to 5:00 EST M-F till noon on Saturday. THIS SHAFT WILL REPLACE YOUR SHAFT ON THE MX7 MOWERS AND MORE. Up for sale is (1) Heavy Duty series 6 pto shaft for most of your 5′ & 6′ & some 7′, 8′ and 10′ Rotary mowers(depending on the style). It has many different applicaions, but cutters is the most common. I will list the specifications for the shaft below. Heavy duty series 6 pto shaft, triangular tubing. Rated for tractors up to 64 hp running a 540rpm, 100 hp if runing 1000rpm. 1-3/8 6 spline (standard 540 on tractors) on the tractor end. 1-3/8 6 spline on the implement end w/ a 4 disc slip clutch adjusted from spring tension, help on by 2 wedge bolts on the side fo the yoke(look at pictures). Collapsed length(from end of the shaft to end of shaft when closed) 55. Fully extended length (stretched as far as it can) 74. Maximum useable length is 63 (this leaves 1/3 of the tube inside itself which is recommended). Remember the shaft can always be cut down if it is to long, just take the same amount off of each side of the tube. This can be done with a hack saw. We sell shafts so cheap on here I have a lot of people call to make sure it is right…. People have become so accustomed with getting ripped at your local tractor dealerships that they feel these shafts must be cheap made and will not last. Our feedback should attest to that! Thanks and God Bless!

]]> https://businessindustrialspline.org/heavy-duty-slip-clutch-pto-shaft-for-7-rotary-mowers-with-1-38-6-splined/feed/ 0 https://businessindustrialspline.org/pto-heavy-clamp-adapter-1-34-in-20-spline-female-1-38-in-21-spline-male-125-hp/ https://businessindustrialspline.org/pto-heavy-clamp-adapter-1-34-in-20-spline-female-1-38-in-21-spline-male-125-hp/#comments Fri, 08 Nov 2024 19:19:46 +0000 https://businessindustrialspline.org/pto-heavy-clamp-adapter-1-34-in-20-spline-female-1-38-in-21-spline-male-125-hp/





Hub city Heavy Clamp PTO Adapter. 8 inch overall length. 1-3/4 inch 20 spline female x 1-3/8 inch 21 spline male. Note- Because of cutout section for clamping function on female side, there are only 18 actual countable splines. The other 2 splines will fall within the cutout sections. See pictures for details. Comes exactly as pictured.

]]> https://businessindustrialspline.org/pto-heavy-clamp-adapter-1-34-in-20-spline-female-1-38-in-21-spline-male-125-hp/feed/ 0 https://businessindustrialspline.org/heavy-duty-series-pto-shaft-1-14-x-1000-spline/ https://businessindustrialspline.org/heavy-duty-series-pto-shaft-1-14-x-1000-spline/#comments Fri, 12 Apr 2024 09:59:25 +0000 https://businessindustrialspline.org/heavy-duty-series-pto-shaft-1-14-x-1000-spline/






Used heavy duty PTO 1000 hookup to 1 1/4 shaft –has shear bolt protection –plastic shield was cut a bit shorter at one time.

]]> https://businessindustrialspline.org/heavy-duty-series-pto-shaft-1-14-x-1000-spline/feed/ 0 https://businessindustrialspline.org/heavy-duty-series-pto-shaft-1-34-x-1000-spline-f9231-long-shaft/ https://businessindustrialspline.org/heavy-duty-series-pto-shaft-1-34-x-1000-spline-f9231-long-shaft/#comments Tue, 29 Aug 2023 10:13:54 +0000 https://businessindustrialspline.org/heavy-duty-series-pto-shaft-1-34-x-1000-spline-f9231-long-shaft/





Heavy heavy duty PTO 1000 hookup to 1 3/4 shaft –has shear bolt protection.

]]> https://businessindustrialspline.org/heavy-duty-series-pto-shaft-1-34-x-1000-spline-f9231-long-shaft/feed/ 0 https://businessindustrialspline.org/atp-heavy-duty-5-pneumatic-spline-drive-impact-wrench/ https://businessindustrialspline.org/atp-heavy-duty-5-pneumatic-spline-drive-impact-wrench/#comments Thu, 20 Apr 2023 15:48:40 +0000 https://businessindustrialspline.org/atp-heavy-duty-5-pneumatic-spline-drive-impact-wrench/



ATP HEAVY DUTY #5 PNEUMATIC SPLINE DRIVE IMPACT WRENCH. Thank you for looking! This item is in the category “Business & Industrial\Light Equipment & Tools\Air Tools\Pneumatic Impact Wrenches”. The seller is “martool” and is located in this country: US. This item can be shipped to United States, New Zealand, Fiji, Papua New Guinea, Wallis and Futuna, Gambia, Malaysia, Taiwan, Poland, Oman, Suriname, United Arab Emirates, Kenya, Argentina, Guinea-Bissau, Armenia, Uzbekistan, Bhutan, Senegal, Togo, Ireland, Qatar, Burundi, Netherlands, Iraq, Slovakia, Slovenia, Equatorial Guinea, Thailand, Aruba, Sweden, Iceland, Macedonia, Belgium, Israel, Liechtenstein, Kuwait, Benin, Algeria, Antigua and Barbuda, Swaziland, Italy, Tanzania, Pakistan, Burkina Faso, Panama, Singapore, Kyrgyzstan, Switzerland, Djibouti, Chile, China, Mali, Botswana, Republic of Croatia, Cambodia, Indonesia, Portugal, Tajikistan, Vietnam, Malta, Cayman Islands, Paraguay, Saint Helena, Cyprus, Seychelles, Rwanda, Bangladesh, Australia, Austria, Sri Lanka, Gabon Republic, Zimbabwe, Bulgaria, Czech Republic, Norway, Côte d’Ivoire (Ivory Coast), Kiribati, Turkmenistan, Grenada, Greece, Haiti, Greenland, Yemen, Afghanistan, Montenegro, Mongolia, Nepal, Bahamas, Bahrain, United Kingdom, Bosnia and Herzegovina, Hungary, Angola, Western Samoa, France, Mozambique, Namibia, Peru, Denmark, Guatemala, Solomon Islands, Vatican City State, Sierra Leone, Nauru, Anguilla, El Salvador, Dominican Republic, Cameroon, Guyana, Azerbaijan Republic, Macau, Georgia, Tonga, San Marino, Eritrea, Saint Kitts-Nevis, Morocco, Saint Vincent and the Grenadines, Mauritania, Belize, Philippines, Democratic Republic of the Congo, Republic of the Congo, Colombia, Spain, Estonia, Bermuda, Montserrat, Zambia, South Korea, Vanuatu, Ecuador, Albania, Ethiopia, Monaco, Niger, Laos, Ghana, Cape Verde Islands, Moldova, Madagascar, Saint Pierre and Miquelon, Lebanon, Liberia, Bolivia, Maldives, Gibraltar, Hong Kong, Central African Republic, Lesotho, Nigeria, Mauritius, Saint Lucia, Jordan, Guinea, Canada, Turks and Caicos Islands, Chad, Andorra, Romania, Costa Rica, India, Mexico, Serbia, Kazakhstan, Saudi Arabia, Japan, Lithuania, Trinidad and Tobago, Malawi, Nicaragua, Finland, Tunisia, Uganda, Luxembourg, Brazil, Turkey, Germany, Egypt, Latvia, Jamaica, South Africa, Brunei Darussalam, Honduras.

• Model: #5
• Country/Region of Manufacture: United States
• MPN: #5
• Brand: ATP

]]> https://businessindustrialspline.org/atp-heavy-duty-5-pneumatic-spline-drive-impact-wrench/feed/ 0 https://businessindustrialspline.org/heavy-duty-40hp-1-38-shear-bolt-rotary-cutter-gearbox-12-spline-output-shaft/ https://businessindustrialspline.org/heavy-duty-40hp-1-38-shear-bolt-rotary-cutter-gearbox-12-spline-output-shaft/#comments Sun, 30 Oct 2022 13:36:13 +0000 https://businessindustrialspline.org/heavy-duty-40hp-1-38-shear-bolt-rotary-cutter-gearbox-12-spline-output-shaft/





As always, please check dimensions against what we have to ensure it to be correct! With older and used machines, it is not uncommon for a person to have placed something unlike the original onto the machine! Note: Actual Gearbox may have a rounded housing or square as shown, depending on current availability, all internal parts are interchangeable and specifications for both boxes are identical! This gearbox features a 1:1.47 Speed Up gear ratio for use on 5′ and larger diameter rotary cutters. Industry standard 1-3/8″ Diameter X Smooth input shaft for a shearbolt, and 1.57″ diameter 12 tapered spline output shaft allow fitment to most light, standard and medium duty rotary cutters. Each gearbox features high speed ball bearing units and heat treated gears and shafts to ensure long life. Four bolt mounting matches industry standards, 4-3/4 Centers. Each gearbox includes blade carrier mounting nut and cotter pin. Please call before you come to verify items are in stock, we try to keep all advertised items in stock at all times. But we would hate to have you visit us and not have the item you are looking for when you get here! Personal check orders held 10 days or until check clears. Your complete satisfaction is important to us. The free listing tool. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment Attachments\Mowers, Mower Decks & Mower Conditioners”. The seller is “dnequipmentparts” and is located in this country: US. This item can be shipped to United States, Canada.

• Model: 01-008
• Gearbox: 40 hp
• Country/Region of Manufacture: Unknown

]]> https://businessindustrialspline.org/heavy-duty-40hp-1-38-shear-bolt-rotary-cutter-gearbox-12-spline-output-shaft/feed/ 0 https://businessindustrialspline.org/heavy-duty-series-6-pto-shaft-1-38-x-6-spline-yokes-with-qd-on-both-ends/ https://businessindustrialspline.org/heavy-duty-series-6-pto-shaft-1-38-x-6-spline-yokes-with-qd-on-both-ends/#comments Thu, 16 Dec 2021 15:45:50 +0000 https://businessindustrialspline.org/heavy-duty-series-6-pto-shaft-1-38-x-6-spline-yokes-with-qd-on-both-ends/






High Quality Italian made spline to spline driveline with 1-3/8 Diameter 6 Spline Yokes with Quick Disconnects. This PTO measurers 53″ closed length (44″ Center of Cross to Center of Cross) and 76.2 maximum extended length. This is a much higher quality PTO than most China made PTO shafts and should provide many years of trouble free use. There is no slip clutch or shear protection on this PTO and it should only be used on implements with built in shear protection. We sell many replacement parts for the most manufacturers rotary cutters. We are listing new items frequently so please check our store often. We are located at. Brooks Ag Parts LC. Your complete satisfaction is important to us, should you have and problems please let us know so we can correct them. If you have any question about the part you need, please call first we will be glad to answer your questions. All parts are guaranteed to meet with your approval! The item “Heavy Duty Series 6 PTO Shaft 1-3/8 X 6 Spline Yokes with QD on Both Ends” is in sale since Wednesday, November 10, 2021. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment Parts & Accessories\Power Take Off Parts”. The seller is “ag_medic” and is located in Amelia, Ohio. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.

• Part Type: Spline to Spline PTO
• Model: Several
• Modified Item: No
• MPN: 33235
• Country/Region of Manufacture: Italy
• Custom Bundle: No
• Brand: Eurocardan
• Compatible Equipment Make: Universal
• Model Year: N/A
• Compatible Equipment Type: Several

]]> https://businessindustrialspline.org/heavy-duty-series-6-pto-shaft-1-38-x-6-spline-yokes-with-qd-on-both-ends/feed/ 0 https://businessindustrialspline.org/heavy-duty-pto-shaft-15-34-closed-length-8-spline-for-1-14-keyed-shaft/ https://businessindustrialspline.org/heavy-duty-pto-shaft-15-34-closed-length-8-spline-for-1-14-keyed-shaft/#comments Tue, 01 Oct 2019 10:20:04 +0000 http://businessindustrialspline.org/heavy-duty-pto-shaft-15-34-closed-length-8-spline-for-1-14-keyed-shaft/




Heavy Duty PTO Shaft 15-3/4″ Closed Length 8 Spline for 1-1/4″ Keyed Shaft. We will work to remedy any problem to your satisfaction. The item “Heavy Duty PTO Shaft 15-3/4 Closed Length 8 Spline for 1-1/4 Keyed Shaft” is in sale since Friday, May 31, 2019. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment Parts & Accessories\Power Take Off Parts”. The seller is “fsasllc” and is located in Chillicothe, Missouri. This item can be shipped worldwide.

• Brand: Unbranded
• MPN: Does Not Apply

]]> https://businessindustrialspline.org/heavy-duty-pto-shaft-15-34-closed-length-8-spline-for-1-14-keyed-shaft/feed/ 0 https://businessindustrialspline.org/heavy-duty-pto-series-6-with-1-34-20-spline-on-both-ends-89-working-length/ https://businessindustrialspline.org/heavy-duty-pto-series-6-with-1-34-20-spline-on-both-ends-89-working-length/#comments Fri, 31 May 2019 12:54:05 +0000 http://businessindustrialspline.org/heavy-duty-pto-series-6-with-1-34-20-spline-on-both-ends-89-working-length/




Heavy Duty PTO Shaft, 1 3/4″ 20 Spline Tractor Side, 1 3/4″ 20 Spline Implement Side, (61″) Closed Length (89″) Working Length. PTO has 4 Disc Slip Clutch for the Implement Side With wedge bolts to hold them on both ends see pictures. Fits some Bushog, LandPride, Servis Rhino and Many other Rotary Cutters. The shaft is protected with plastic safety shields. Replacement parts are available for these PTO Shafts. This is a category or series 6 metric shaft. At DN Equipment, we stock a complete line of replacement PTO shafts and PTO shaft repair parts. Please call before you come to verify items are in stock, we try to keep all advertised items in stock at all times. But we would hate to have you visit us and not have the item you are looking for when you get here! We are located at. We now take Discover Card and American Express Too! Personal check orders held 10 days or until check clears. Your complete satisfaction is important to us. The free listing tool. The item “Heavy Duty PTO Series 6 with 1-3/4” 20 spline on Both Ends 89 Working Length” is in sale since Thursday, April 5, 2018. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment Parts & Accessories\Farm Implement Parts”. The seller is “dnequipmentparts” and is located in Mount Orab, Ohio. This item can be shipped to United States.

• Brand: Eurocardan
• MPN: AX6-1-3/4-20
• Type: PTO
• Equipment Type: PTO Series 6

]]> https://businessindustrialspline.org/heavy-duty-pto-series-6-with-1-34-20-spline-on-both-ends-89-working-length/feed/ 0 https://businessindustrialspline.org/heavy-equipment-spline-repair-belzona-mpt/ https://businessindustrialspline.org/heavy-equipment-spline-repair-belzona-mpt/#comments Sun, 06 Jan 2019 15:08:14 +0000 http://businessindustrialspline.org/heavy-equipment-spline-repair-belzona-mpt/ ]]> https://businessindustrialspline.org/heavy-equipment-spline-repair-belzona-mpt/feed/ 0