https://businessindustrialspline.org Fri, 01 May 2026 14:08:58 +0000 en-CA hourly 1 https://wordpress.org/?v=4.1.1 https://businessindustrialspline.org/a15t-servo-rotary-broach-punch-tool-12mm-shank-spline-cutter-bit/ https://businessindustrialspline.org/a15t-servo-rotary-broach-punch-tool-12mm-shank-spline-cutter-bit/#comments Fri, 16 May 2025 10:14:39 +0000 https://businessindustrialspline.org/a15t-servo-rotary-broach-punch-tool-12mm-shank-spline-cutter-bit/


All punch bit is positive tolerance +0.05mm, like 6mm, you get the bit is 6.05mm. Like A15T, you should use drill bit to do a hole 3.9mm. 2, Use punch bit A15T to working in the hole, at first, cutting feed slowly, like 300-500 is ok.

]]> https://businessindustrialspline.org/a15t-servo-rotary-broach-punch-tool-12mm-shank-spline-cutter-bit/feed/ 0