Tag Archives: involute

Shaper Cutters Involute Splines M2.5 Z-8 PA30 HSS USSR Shank Type Shaper Cutter

Shaper_Cutters_Involute_Splines_M2_5_Z_8_PA30_HSS_USSR_Shank_Type_Shaper_Cutter_01_jf

Shaper Cutters Involute Splines Type Shank. Used for splined connections according to DIN 5480, DIN 5482, ISO 4156, ANSI B92.2M, ANSI B. Module – 2.5. Number of teeth – 8. Pressure angle – 30 deg. Face width – 15 mm. Outside Dia dao – 25.2 mm. Length of total – 140mm. Morse Taper – B24 […]

Involute Gear Cutter Set M2 PA20° HSS (1-8) Spline Modulfräser Zahnradfräser

Involute_Gear_Cutter_Set_M2_PA20_HSS_1_8_Spline_Modulfraser_Zahnradfraser_01_uhao

Outside Dia – 63mm. Bore Dia – 22mm. Material – HSS P6M5 =. Range of Cutters for module gear cutters. Cuts Gear tooth range. 135 – to Rack. May be imposed by your post office or government agency in your country. The item “Involute Gear Cutter Set M2 PA20° HSS (1-8) Spline Modulfräser Zahnradfräser” is […]

Involute Gear Cutter Set M0,5 20° HSS (1-8) Spline Modulfräser Zahnradfräser

Involute_Gear_Cutter_Set_M0_5_20_HSS_1_8_Spline_Modulfraser_Zahnradfraser_01_rg

Module – M0,5. Pressure angle – 20 deg. Outside Dia – 32mm. Bore Dia – 13mm. Material – HSS (M2 Grade). Range of Cutters for module gear cutters. Cuts Gear tooth range. 135 – to Rack. May be imposed by your post office or government agency in your country. The item “Involute Gear Cutter Set […]

Shaper Cutters Involute Splines M2.5 Z-10 PA30 HSS USSR Shank Type Shaper Cutter

Shaper Cutters Involute Splines Type Shank. Used for splined connections according to DIN 5480, DIN 5482, ISO 4156, ANSI B92.2M, ANSI B. Module – 2.5. Number of teeth – 10. Pressure angle – 30 deg. Face width– 10 mm. Outside Dia dao – 29.29 mm. Length of total – 140mm. Morse Taper – B18 (shortened […]

Taper Shank HSS M2 Z-10 PA30 USSR Shaper Cutters Involute Splines

Shaper Cutters Involute Splines Taper Shank. Used for splined connections according to DIN 5480, DIN 5482, ISO 4156, ANSI B92.2M, ANSI B. Number of teeth – 10. Pressure angle – 30 deg. Face width– 15 mm. Outside Dia dao – 23.54 mm. Morse Taper – B18(shortened MT2). For other countries please contact me to get […]

Shaper Cutters Involute Splines M1.5 Z-9 PA30 HSS USSR Shank Type Shaper Cutter

Shaper Cutters Involute Splines Type Shank. Used for splined connections according to DIN 5480, DIN 5482, ISO 4156, ANSI B92.2M, ANSI B. Module – 1.5. Number of teeth – 9. Pressure angle – 30 deg. Face width– 10 mm. Outside Dia dao – 14.6 mm. Length of total – 130mm. Morse Taper – B18 (shortened […]

Involute Gear Cutter Set M0,5 20° HSS (1-8) Spline Modulfräser Zahnradfräser

Items are new & never been used, this is just unsignificant imperfection of USSR factory sharpening. Despite this, material quality was very high those days, at least better than chinese HSS nowdays. According to my experience these cutters’ form relieved to allow resharpening many times. Feel the difference (1st photo: my cutters; 2d – used […]

Recent Posts

Archives

Categories